I'm working from the 1.0.2h tarball. The platform is Debian 8 (booted
with syscall.x32=y, but the X32 chroot was not entered). GCC is 5.2.1.
'-fPIC' was manually added after 'shared' caused the initial
"relocation R_X86_64_32 ..." error. Omitting 'shared' does not witness
an error.
$ reset && ./config shared -fPIC no-ssl2 no-ssl3 no-comp
-Wl,-rpath=/usr/local/ssl/lib --prefix=/usr/local/ssl
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring for linux-x86_64
no-comp [option] OPENSSL_NO_COMP (skip dir)
no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir)
no-gmp [default] OPENSSL_NO_GMP (skip dir)
no-jpake [experimental] OPENSSL_NO_JPAKE (skip dir)
no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5
no-libunbound [experimental] OPENSSL_NO_LIBUNBOUND (skip dir)
no-md2 [default] OPENSSL_NO_MD2 (skip dir)
no-rc5 [default] OPENSSL_NO_RC5 (skip dir)
no-rfc3779 [default] OPENSSL_NO_RFC3779 (skip dir)
no-sctp [default] OPENSSL_NO_SCTP (skip dir)
no-ssl-trace [default] OPENSSL_NO_SSL_TRACE (skip dir)
no-ssl2 [option] OPENSSL_NO_SSL2 (skip dir)
no-ssl3 [option] OPENSSL_NO_SSL3 (skip dir)
no-store [experimental] OPENSSL_NO_STORE (skip dir)
no-unit-test [default] OPENSSL_NO_UNIT_TEST (skip dir)
no-weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS (skip dir)
no-zlib [default]
no-zlib-dynamic [default]
IsMK1MF=0
CC =gcc
CFLAG =-fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT
-DDSO_DLFCN -DHAVE_DLFCN_H -fPIC -Wa,--noexecstack -m64 -DL_ENDIAN -O3
-Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5
-DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM
-DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
-DECP_NISTZ256_ASM
EX_LIBS =-Wl,-rpath=/usr/local/ssl/lib -ldl
CPUID_OBJ =x86_64cpuid.o
BN_ASM =x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o
rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o
EC_ASM =ecp_nistz256.o ecp_nistz256-x86_64.o
DES_ENC =des_enc.o fcrypt_b.o
AES_ENC =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o
aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o
aesni-mb-x86_64.o
BF_ENC =bf_enc.o
CAST_ENC =c_enc.o
RC4_ENC =rc4-x86_64.o rc4-md5-x86_64.o
RC5_ENC =rc5_enc.o
MD5_OBJ_ASM =md5-x86_64.o
SHA1_OBJ_ASM =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
sha1-mb-x86_64.o sha256-mb-x86_64.o
RMD160_OBJ_ASM=
CMLL_ENC =cmll-x86_64.o cmll_misc.o
MODES_OBJ =ghash-x86_64.o aesni-gcm-x86_64.o
ENGINES_OBJ =
PROCESSOR =
RANLIB =/usr/bin/ranlib
ARFLAGS =
PERL =/usr/bin/perl
SIXTY_FOUR_BIT_LONG mode
$ make depend && make
...
make[2]: Entering directory '/home/openssl-1.0.2h'
[ -z "" ] || gcc -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT
-DDSO_DLFCN -DHAVE_DLFCN_H -fPIC -Wa,--noexecstack -m64 -DL_ENDIAN -O3
-Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5
-DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM
-DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
-DECP_NISTZ256_ASM -Iinclude \
-DFINGERPRINT_PREMAIN_DSO_LOAD -o fips_premain_dso \
fips_premain.c fipscanister.o \
libcrypto.a -Wl,-rpath=/usr/local/ssl/lib -ldl
make[3]: Entering directory '/home/openssl-1.0.2h'
make[4]: Entering directory '/home/openssl-1.0.2h'
/usr/bin/ld: libcrypto.a(rsaz_exp.o): relocation R_X86_64_32 against
`.rodata' can not be used when making a shared object; recompile with
-fPIC
libcrypto.a(rsaz_exp.o): error adding symbols: Bad value
collect2: error: ld returned 1 exit status
Makefile.shared:169: recipe for target 'link_a.gnu' failed
make[4]: *** [link_a.gnu] Error 1
make[4]: Leaving directory '/home/openssl-1.0.2h'
Makefile:354: recipe for target 'do_linux-shared' failed
make[3]: *** [do_linux-shared] Error 2
make[3]: Leaving directory '/home/openssl-1.0.2h'
Makefile:307: recipe for target 'libcrypto.so.1.0.0' failed
make[2]: *** [libcrypto.so.1.0.0] Error 2
make[2]: Leaving directory '/home/openssl-1.0.2h'
Makefile:109: recipe for target 'shared' failed
make[1]: *** [shared] Error 2
make[1]: Leaving directory '/home/openssl-1.0.2h/crypto'
Makefile:284: recipe for target 'build_crypto' failed
make: *** [build_crypto] Error 1
$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian
5.2.1-20' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
--enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
--prefix=/usr --program-suffix=-5 --enable-shared
--enable-linker-build-id --libexecdir=/usr/lib
--without-included-gettext --enable-threads=posix --libdir=/usr/lib
--enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-libmpx --enable-plugin
--with-system-zlib --disable-browser-plugin --enable-java-awt=gtk
--enable-gtk-cairo
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre
--enable-java-home
--with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64
--with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
--with-arch-directory=amd64
--with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
--enable-multiarch --with-arch-32=i586 --with-abi=m64
--with-multilib-list=m32,m64,mx32 --enable-multilib
--with-tune=generic --enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 5.2.1 20151002 (Debian 5.2.1-20)
--
Ticket here: http://rt.openssl.org/Ticket/Display.html?id=4654
Please log in as guest with password guest if prompted
--
openssl-dev mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
