I had the same problem on HP-UX 10.20, but when I recompiled openssl
with CFLAGS='-fPIC' (or CFLAGS='+Z' if you are not using gcc) I did
over come this problem. I have all kind of other problem (appearently
to do with using gcc) which I am still asking people about (as I am
not a C programmer), but this is one I did manage to solve. I can
remember if I did "CFLAGS='+Z' ./configure" or if I had to change the
makefile.
Kees Vonk
[EMAIL PROTECTED]
09/03/01 00:44
To: [EMAIL PROTECTED] @ gateway
cc:
Subject: HELP - Crypt-SSleay-0.22 Install on HPUX 11.00 64 bit arch
Greetings,
I read through the instructions for installing Crypt-SSleay-0.22
which says
that the OpenSSL OR SSLeay module must be installed before compiling
the
Crypt-SSleay-0.22 module. I followed the instructions and
successfully
compiled
the 'openssl-0.9.6' module on my HP server. However, I went ahead
and tried to
compile the Crypt::SSLeay module and continue to get the following
error.
# make
LD_RUN_PATH="/usr/local/ssl/lib" ld -o
blib/arch/auto/Crypt/SSLeay/SSLea
y.sl -b -L/usr/local/lib SSLeay.o -L/usr/local/ssl/lib -lssl
-lcrypto
ld: DP relative code in file /usr/local/ssl/lib/libssl.a(s2_clnt.o) -
shared library must be position independent. Use +z or +Z to
recompile.
*** Error exit code 1
Stop.
Two Questions . . .
1) Has anyone every successfully compiled this module on an HP
server running
HP-UX 11.00 (64 bit)?
2) If so, is there any information on this regarding how to
successfully
compile it.
What do I do with the information listed above and how do I get
the
compile to
work.
Please let me know . . . I am running out of alternatives and about
to
conclude that
it cannot be compiled on an HP server.
Brian Thomas
Cisco Systems, Inc. San Jose, CA.
______________________________________________________________________
OpenSSL Project
http://www.openssl.orgUser Support Mailing List
[EMAIL PROTECTED]
Automated List Manager [EMAIL PROTECTED]
______________________________________________________________________
The views expressed in this email are not necessarily the views of
Transco plc, and the company, its directors, officers or employees
make no representation or accept any liability for its accuracy or
completeness unless expressly stated to the contrary.
This e-mail, and any attachments are strictly confidential and
intended for the addressee(s) only. The content may also contain
legal, professional or other privileged information. If you are not
the intended recipient, could you please notify the sender
immediately and then delete the e-mail and any attachments, you
should not disclose, copy or take any action in reliance of this
transmission. Unless expressly stated to the contrary, no contracts
may be concluded on behalf of Transco plc by means of e-mail
communication.
You may report the matter by calling us on +44 (0)1455 230999.
You should not copy, forward or otherwise disclose the contents of
this e-mail or any of its attachments without express consent.
Please ensure you have adequate virus protection before you open or
detach any documents from this transmission. Transco plc does not
accept any liability for viruses.
Transco plc is part of Lattice Group
Transco plc is registered in England: Company number: 2006000
Registered Office: 130 Jermyn Street, London, SW1Y 4UR
http://www.transco.uk.com
______________________________________________________________________
OpenSSL Project http://www.openssl.org
User Support Mailing List [EMAIL PROTECTED]
Automated List Manager [EMAIL PROTECTED]
