Hi, Jarda
>We are already prepared for multiple drivers. If you look at the >Driver >field, there is a dropdown menu from which you can choose a driver and >based on the selection the additional information (like IP, user, passw) >will be changed. So, if "iLO + Virtual Media" is chosen in the dropdown menu, Horizon node managmement panel will display "iLO Password" and "iLO user " instead of "IPMI user" and "IPMI Password"? This is great! >> Also, myself and a few folks are working on Ironic UEFI support and >> we hope to land this feature in Juno (Spec is still in review state but >> the feature is on the Ironic Juno Prioritized list). In order to add >> UEFI boot feature, a "Supported Boot Modes" field in the hardware info >> is needed. The possible values are "BIOS Only", "UEFI Only", and >> "BIOS+UEFI". We will need to work with you to add this field onto >> hardware info. >There is no problem to accommodate this change in the UI once the >back-end supports it. So if there is a desire to expose the feature in >the UI, when there is already working back-end solution, feel free to >send a patch which adds that to the HW info - it's an easy addition and the UI is prepared for such types of expansions. ok. Thanks! wanyen >Hi Wan, >thanks for great notes. My response is inline: >On 2014/15/07 23:19, Wan-yen Hsu wrote: >> The "Register Nodes" panel uses "IPMI user" and "IPMI Password". >> However, not all Ironic drivers use IPMI, for instance, some Ironic >> drivers will use iLO or other BMC interfaces instead of IPMI. I would >> like to suggest changing "IPMI" to "BMC" or ""IPMI/BMC" to acomodate >> more Ironic drivers. The "Driver" field will reflect what power >> management interface (e.g., IPMI + PXE, or iLO + Virtual Media) is used >> so it can be used to correlate the user and password fields. >We are already prepared for multiple drivers. If you look at the >Driver >field, there is a dropdown menu from which you can choose a driver and >based on the selection the additional information (like IP, user, passw) >will be changed. >> Also, myself and a few folks are working on Ironic UEFI support and >> we hope to land this feature in Juno (Spec is still in review state but >> the feature is on the Ironic Juno Prioritized list). In order to add >> UEFI boot feature, a "Supported Boot Modes" field in the hardware info >> is needed. The possible values are "BIOS Only", "UEFI Only", and >> "BIOS+UEFI". We will need to work with you to add this field onto >> hardware info. >There is no problem to accommodate this change in the UI once the >back-end supports it. So if there is a desire to expose the feature in >the UI, when there is already working back-end solution, feel free to >send a patch which adds that to the HW info - it's an easy addition and the UI is prepared for such types of expansions. > Thanks! > > wanyen Cheers -- Jarda
_______________________________________________ OpenStack-dev mailing list OpenStack-dev@lists.openstack.org http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev