On Wed, Aug 6, 2014 at 5:27 PM, Kevin Benton <blak...@gmail.com> wrote:
> Web tier can communicate with anything except for the DB. > App tier can only communicate with Web and DB. > DB can communicate with App. > > These high-level constraints can then be implemented as security groups > like you showed, or network hardware ACLs like I had shown. > But if you start with the security groups API, you are forcing it to be > implemented there. > > I still have no idea what group based policy is buying us then. It seems to me that the key point we've identified going backing and forth here is the difference between the current model and the GBP model is that GBP constricts topology which allows us to write these types of enforcement rules. The reason we want this is because it yields performance optimizations (for some reason, which I don't think we've gotten into). Would you agree this is accurate? Honestly, I know a lot of work has been put into this. I haven't said I'm for or against it either. I'm really just trying to understand what is the motivation for this and why does it make neutron better. Best, Aaron > > On Wed, Aug 6, 2014 at 6:06 PM, Aaron Rosen <aaronoro...@gmail.com> wrote: > >> >> >> >> On Wed, Aug 6, 2014 at 4:46 PM, Kevin Benton <blak...@gmail.com> wrote: >> >>> That's the point. By using security groups, you are forcing a certain >>> kind of enforcement that must be honored and might not be necessary if the >>> original intent was just to isolate between groups. In the example you >>> gave, it cannot be implemented on the router without violating the >>> constraints of the security group. >>> >>> >>> Hi Kevin, >> >> Mind proposing an alternative example then. The only way I can see this >> claim to be made is because Group Based policy is actually limiting what a >> tenants desired topology can be? >> >> Thanks, >> >> Aaron >> >> >> >>> On Wed, Aug 6, 2014 at 5:39 PM, Aaron Rosen <aaronoro...@gmail.com> >>> wrote: >>> >>>> >>>> >>>> >>>> On Wed, Aug 6, 2014 at 4:18 PM, Kevin Benton <blak...@gmail.com> wrote: >>>> >>>>> >Given this information I don't see any reason why the backend system >>>>> couldn't do enforcement at the logical router and if it did so neither >>>>> parties would know. >>>>> >>>>> With security groups you are specifying that nothing can contact these >>>>> devices on those ports unless they come from the allowed IP addresses. If >>>>> you tried to enforce this at the router you would be violating that >>>>> specification because devices in the same subnet would be able to >>>>> communicate on those blocked ports. >>>>> >>>> >>>> Sure, though this is a problem of where you are doing your enforcement. >>>> If the backend system chooses to implement this optimization in this >>>> fashion (which was the example you gave previously [1]). Then, if the >>>> topology changes, i.e adding a port to the same network with conflicting >>>> security group rules, the backend system can no longer optimize in this >>>> same fashion at the router level and a more fine grain filtering will need >>>> to be done. How would this be any different with group based policy? >>>> >>>> >>>> [1] - With the latter, a mapping driver could determine that >>>> communication between these two hosts can be prevented by using an ACL on a >>>> router or a switch, which doesn't violate the user's intent and buys a >>>> performance improvement and works with ports that don't support security >>>> groups. >>>> >>>> states >>>> >>>> >>>> >>>>> >>>>> >>>>> On Wed, Aug 6, 2014 at 5:00 PM, Aaron Rosen <aaronoro...@gmail.com> >>>>> wrote: >>>>> >>>>>> >>>>>> On Wed, Aug 6, 2014 at 3:35 PM, Kevin Benton <blak...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> By working at the port level you have already eliminated your >>>>>>> ability to implement the filtering at different components of the >>>>>>> network. >>>>>>> They now need to be implemented in stateful rules at the port level and >>>>>>> the >>>>>>> device has to support security groups. >>>>>>> >>>>>> >>>>>> >>>>>> Lets take this example where we setup a 2 tier app with web-servers >>>>>> and db-servers that are connected on two different networks attached to a >>>>>> router. We add a security group rules such that web-servers can talk to >>>>>> db-servers on tcp:3306 and a rule to allow tcp:80 into the web-servers >>>>>> from >>>>>> anywhere. >>>>>> >>>>>> neutron net-create web_net >>>>>> neutron subnet-create --name web_subnet web_net 10.0.0.0/24 >>>>>> >>>>>> neutron net-create db_net >>>>>> neutron subnet-create --name db_subnet db_net 10.2.0.0/24 >>>>>> >>>>>> neutron router-create myrouter >>>>>> neutron router-interface-add myrouter web_subnet >>>>>> neutron router-interface-add myrouter db_subnet >>>>>> >>>>>> neutron security-group-create web-servers; >>>>>> neutron security-group-create db-servers; >>>>>> >>>>>> # add rule to allow web members to talk to the db-servers on TCP 3306 >>>>>> for their db connection; >>>>>> neutron security-group-rule-create --protocol TCP --port-range-min >>>>>> 3306 --port-range-max 3306 --remote-group-id web-servers db-servers >>>>>> >>>>>> # add rule to allow TCP 80 into the web-server sg >>>>>> neutron security-group-rule-create --protocol TCP --port-range-min 80 >>>>>> --port-range-max 80 web-servers db-servers >>>>>> >>>>>> # create some ports with desired security profiles. >>>>>> neutron port-create --security-group web-servers web_net >>>>>> neutron port-create --security-group web-servers web_net >>>>>> >>>>>> neutron port-create --security-group db-servers db_net >>>>>> neutron port-create --security-group db-servers db_net >>>>>> >>>>>> >>>>>> Now to your point: >>>>>> >>>>>> By working at the port level you have already eliminated your ability >>>>>>> to implement the filtering at different components of the network. They >>>>>>> now >>>>>>> need to be implemented in stateful rules at the port level and the >>>>>>> device >>>>>>> has to support security groups. >>>>>>> >>>>>>> >>>>>> Given this information I don't see any reason why the backend system >>>>>> couldn't do enforcement at the logical router and if it did so neither >>>>>> parties would know. The backend system should have the full graph of >>>>>> everything and be able to do enforcement optimizations where ever it >>>>>> likes. >>>>>> >>>>>> btw: I say the enforcement could be done on the logical router though >>>>>> the backend system could also do this on the physical fabic as well if it >>>>>> wanted to as it should also know that graph. No? >>>>>> >>>>>> >>>>>>> >>>>>>> On Wed, Aug 6, 2014 at 4:03 PM, Aaron Rosen <aaronoro...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Wed, Aug 6, 2014 at 12:46 PM, Kevin Benton <blak...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> >I believe the referential security group rules solve this >>>>>>>>> problem (unless I'm not understanding): >>>>>>>>> >>>>>>>>> I think the disconnect is that you are comparing the way to >>>>>>>>> current mapping driver implements things for the reference >>>>>>>>> implementation >>>>>>>>> with the existing APIs. Under this light, it's not going to look like >>>>>>>>> there >>>>>>>>> is a point to this code being in Neutron since, as you said, the >>>>>>>>> abstraction could happen at a client. However, this changes once new >>>>>>>>> mapping drivers can be added that implement things differently. >>>>>>>>> >>>>>>>>> Let's take the security groups example. Using the security groups >>>>>>>>> API directly is imperative ("put a firewall rule on this port that >>>>>>>>> blocks >>>>>>>>> this IP") compared to a higher level declarative abstraction ("make >>>>>>>>> sure >>>>>>>>> these two endpoints cannot communicate"). With the former, the ports >>>>>>>>> must >>>>>>>>> support security groups and there is nowhere except for the firewall >>>>>>>>> rules >>>>>>>>> on that port to implement it without violating the user's >>>>>>>>> expectation. With >>>>>>>>> the latter, a mapping driver could determine that communication >>>>>>>>> between >>>>>>>>> these two hosts can be prevented by using an ACL on a router or a >>>>>>>>> switch, >>>>>>>>> which doesn't violate the user's intent and buys a performance >>>>>>>>> improvement >>>>>>>>> and works with ports that don't support security groups. >>>>>>>>> >>>>>>>>> Group based policy is trying to move the requests into the >>>>>>>>> declarative abstraction so optimizations like the one above can be >>>>>>>>> made. >>>>>>>>> >>>>>>>> >>>>>>>> Hi Kevin, >>>>>>>> >>>>>>>> Interesting points. Though, let me ask this. Why do we need to move >>>>>>>> to a declarative API abstraction in neutron in order to perform this >>>>>>>> optimization on the backend? For example, In the current neutron model >>>>>>>> say >>>>>>>> we want to create a port with a security group attached to it called >>>>>>>> web >>>>>>>> that allows TCP:80 in and members who are in a security group called >>>>>>>> database. From this mapping I fail to see how it's really any different >>>>>>>> from the declarative model? The ports in neutron are logical >>>>>>>> abstractions >>>>>>>> and the backend system could be implemented in order to determine that >>>>>>>> the >>>>>>>> communication between these two hosts could be prevented by using an >>>>>>>> ACL on >>>>>>>> a router or switch as well. >>>>>>>> >>>>>>>> Best, >>>>>>>> >>>>>>>> Aaron >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> OpenStack-dev mailing list >>>>>>>>> OpenStack-dev@lists.openstack.org >>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> OpenStack-dev mailing list >>>>>>>> OpenStack-dev@lists.openstack.org >>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Kevin Benton >>>>>>> >>>>>>> _______________________________________________ >>>>>>> OpenStack-dev mailing list >>>>>>> OpenStack-dev@lists.openstack.org >>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> OpenStack-dev mailing list >>>>>> OpenStack-dev@lists.openstack.org >>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Kevin Benton >>>>> >>>>> _______________________________________________ >>>>> OpenStack-dev mailing list >>>>> OpenStack-dev@lists.openstack.org >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> OpenStack-dev mailing list >>>> OpenStack-dev@lists.openstack.org >>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>>> >>>> >>> >>> >>> -- >>> Kevin Benton >>> >>> _______________________________________________ >>> OpenStack-dev mailing list >>> OpenStack-dev@lists.openstack.org >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>> >>> >> >> _______________________________________________ >> OpenStack-dev mailing list >> OpenStack-dev@lists.openstack.org >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >> >> > > > -- > Kevin Benton > > _______________________________________________ > OpenStack-dev mailing list > OpenStack-dev@lists.openstack.org > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > >
_______________________________________________ OpenStack-dev mailing list OpenStack-dev@lists.openstack.org http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev