Try creating/updated ~/.pip/pip.conf With contents:
[global] proxy = http://your_proxy:port/ From: KARR, DAVID [mailto:dk0...@att.com] Sent: Thursday, June 11, 2015 4:16 PM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] Looking for help getting git-review to work over https This is just going swimmingly. % sudo python setup.py install Download error on https://pypi.python.org/simple/pbr/: [Errno 110] Connection timed out -- Some packages may not be found! Couldn't find index page for 'pbr' (maybe misspelled?) Download error on https://pypi.python.org/simple/: [Errno 110] Connection timed out -- Some packages may not be found! No local packages or download links found for pbr Do I have to do something special to set the proxy for this? I have “http_proxy” and “https_proxy” already set. From: ZZelle [mailto:zze...@gmail.com] Sent: Thursday, June 11, 2015 3:50 PM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] Looking for help getting git-review to work over https Indeed, the doc[1] is unclear git-review can be installed using: python setup.py install or pip install . [1]http://docs.openstack.org/infra/manual/developers.html#accessing-gerrit-over-https On Thu, Jun 11, 2015 at 11:16 PM, KARR, DAVID <dk0...@att.com<mailto:dk0...@att.com>> wrote: I see. I would guess a footnote on the instructions about this would be useful. Is https://github.com/openstack-infra/git-review the proper location to get the buildable source? I don’t see any obvious build instructions there. From: ZZelle [mailto:zze...@gmail.com<mailto:zze...@gmail.com>] Sent: Thursday, June 11, 2015 2:01 PM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] Looking for help getting git-review to work over https Hi David, Following git config options are supported by git-review (https://review.openstack.org/116035) git config --global gitreview.scheme https git config --global gitreview.port 443 BUT the feature was merged after 1.24 (it's highlighted by your git review -vs) so the feature is currently only available on the git-review master branch (which is quite stable, i use it every day). Cedric/ZZelle@irc On Thu, Jun 11, 2015 at 10:14 PM, KARR, DAVID <dk0...@att.com<mailto:dk0...@att.com>> wrote: I followed the instructions for installing and configuring corkscrew, similar to what you provided here. The result seems to indicate it did something, but the overall result is the same: 2015-06-11 13:07:25.866568 Running: git log --color=never --oneline HEAD^1..HEAD 2015-06-11 13:07:25.869309 Running: git remote 2015-06-11 13:07:25.872742 Running: git config --get gitreview.username No remote set, testing ssh://dk0...@review.openstack.org:29418/openstack/horizon.git<http://dk0...@review.openstack.org:29418/openstack/horizon.git> 2015-06-11 13:07:25.874869 Running: git push --dry-run ssh://dk0...@review.openstack.org:29418/openstack/horizon.git<http://dk0...@review.openstack.org:29418/openstack/horizon.git> --all The authenticity of host '[review.openstack.org<http://review.openstack.org>]:29418 (<no hostip for proxy command>)' can't be established. RSA key fingerprint is 28:c6:42:b7:44:d2:48:64:c1:3f:31:d8:1b:6e:3b:63. Are you sure you want to continue connecting (yes/no)? yes ssh://dk0...@review.openstack.org:29418/openstack/horizon.git<http://dk0...@review.openstack.org:29418/openstack/horizon.git> did not work. Could not connect to gerrit. Enter your gerrit username: --------------------------- From: Paul Michali [mailto:p...@michali.net<mailto:p...@michali.net>] Sent: Thursday, June 11, 2015 11:09 AM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] Looking for help getting git-review to work over https Do you know if you have SSH access to the outside world through the firewall? Did you setup a proxy? I setup 'corkscrew' under Ubuntu. After installing, created a .ssh/config file with: Host review.openstack.org<http://review.openstack.org> ProxyCommand corkscrew <proxy-host> 80 %h %p The proxy host is one that allows HTTP/HTTPS to outside world and corkscrew tunnels the SSH through to port 80. HTHs, PCM On Thu, Jun 11, 2015 at 12:44 PM KARR, DAVID <dk0...@att.com<mailto:dk0...@att.com>> wrote: Thanks for replying. % git review -vs 2015-06-11 09:30:38.396076 Running: git log --color=never --oneline HEAD^1..HEAD 2015-06-11 09:30:38.399021 Running: git remote 2015-06-11 09:30:38.401033 Running: git config --get gitreview.username No remote set, testing ssh://dk0...@review.openstack.org:29418/openstack/horizon.git<http://dk0...@review.openstack.org:29418/openstack/horizon.git> 2015-06-11 09:30:38.402988 Running: git push --dry-run ssh://dk0...@review.openstack.org:29418/openstack/horizon.git<http://dk0...@review.openstack.org:29418/openstack/horizon.git> --all ssh://dk0...@review.openstack.org:29418/openstack/horizon.git<http://dk0...@review.openstack.org:29418/openstack/horizon.git> did not work. Could not connect to gerrit. Enter your gerrit username: This output is interesting, because I followed the instructions to set the scheme and port to https and 443, which can be seen from: % git config --global -l user.name<http://user.name>=David Karr user.email=dk0...@att.com<mailto:dk0...@att.com> gitreview.scheme=https gitreview.port=443 Concerning the question ‘Do you have "gerrit" remote already configured?’, I guess I’d have to say I don’t know. I’ve followed instructions for setting up my pub key, but I’m not sure exactly what is entailed in “gerrit remote”. I can get to https://review.openstack.org/ from my browser and from the command line with curl. The “ls-remote” command returns without error (or any other output). From: Yuriy Taraday [mailto:yorik....@gmail.com<mailto:yorik....@gmail.com>] Sent: Thursday, June 11, 2015 9:19 AM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] Looking for help getting git-review to work over https On Thu, Jun 11, 2015, 18:09 KARR, DAVID <dk0...@att.com<mailto:dk0...@att.com>> wrote: I could use some help with setting up git-review in a slightly unfriendly firewall situation. I'm trying to set up git-review on my CentOS7 VM, and our firewall blocks the non-standard ssh port. I'm following the instructions at http://docs.openstack.org/infra/manual/developers.html#accessing-gerrit-over-https , for configuring git-review to use https on port 443, but this still isn't working (times out with "Could not connect to gerrit"). I've confirmed that I can reach other external sites on port 443. Can someone give me a hand with this? Hello. - Can you please post all output from "git review -vs"? - Do you have "gerrit" remote already configured? - Do you have access to https://review.openstack.org/ from your browser? - Can you access it from command line (via "curl -I https://review.openstack.org/"; for example)? - Does "git ls-remote https://review.openstack.org/openstack/nova > /dev/null" produce and error? __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe<http://openstack-dev-requ...@lists.openstack.org?subject:unsubscribe> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe<http://openstack-dev-requ...@lists.openstack.org?subject:unsubscribe> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe<http://openstack-dev-requ...@lists.openstack.org?subject:unsubscribe> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
