Thanks Moshe,
Referring to https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking,
it has the note:
Note:SR-IOV agent only work with NoopFirewallDriver when Security Groups are
enabled, but you can still use other firewall_driver for other Agents by
updating their conf with the requested firewall driver.
So I think linux.iptables_firewall.OVSHybridIptabl maybe not the issue.
[root@compute ~]# ps -ef|grep neutron-sriov
root 28672 26639 0 22:45 pts/0 00:00:00 grep --color=auto neutron-sriov
neutron 30891 1 0 05:21 ? 00:01:41 /usr/bin/python2
/usr/bin/neutron-sriov-nic-agent --config-file
/usr/share/neutron/neutron-dist.conf --config-file /etc/neutron/neutron.conf
--config-dir /etc/neutron/conf.d/neutron-sriov-nic-agent --config-file
/etc/neutron/plugins/ml2/ml2_conf_sriov.ini --log-file
/var/log/neutron/sriov-nic-agent.log
I will have a try of vlan and vxlan.
Thank you,
Yu
------------------ ???????? ------------------
??????: "Moshe Levi";<[email protected]>;
????????: 2015??8??21??(??????) ????5:15
??????: "OpenStack Development Mailing List (not for usage
questions)"<[email protected]>;
"openstack-operators"<[email protected]>;
????: Re: [openstack-dev] [Neutron][SR-IOV]How to assign VF to a VM?
The problem is the sriov mechanism drive failed to bind the port.
For the log I see that you are working with agent_required=True, but the device
mapping is empty {u'devices': 0, u'device_mappings': {}
Please check the agent configuration file see that you have the following
[securitygroup]
firewall_driver = neutron.agent.firewall.NoopFirewallDriver
[sriov_nic]
physical_device_mappings = physnet1:eth1
exclude_devices =
also can you send the output of ??ps ?Cef | grep neutron-sriov-nic-agent??
command?
From: ???? [mailto:[email protected]]
Sent: Friday, August 21, 2015 12:01 PM
To: openstack-operators <[email protected]>;
openstack-dev <[email protected]>
Subject: [openstack-dev] [Neutron][SR-IOV]How to assign VF to a VM?
Hi all,
I try to configure SRIOV on OpenStack Kilo referring the information below.
http://www.qlogic.com/solutions/Documents/UsersGuide_OpenStack_SR-IOV.pdf
https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking
Until creating port it works well. But after creating VM using the port created
before, it was in the state of ERROR. Below is the port information:
neutron port-show 620187c5-b4ac-4aca-bdeb-96205503344d
+-----------------------+----------------------------------------------------------------------------------------------+
| Field | Value
|
+-----------------------+----------------------------------------------------------------------------------------------+
| admin_state_up | True
|
| allowed_address_pairs |
|
| binding:host_id | compute
|
| binding:profile | {"pci_slot": "0000:09:11.5", "physical_network":
"external", "pci_vendor_info": "8086:1520"} |
| binding:vif_details | {}
|
| binding:vif_type | binding_failed
|
| binding:vnic_type | direct
|
| device_id | baab9ba5-80e8-45f7-b86a-8ac3ce8ba944
|
| device_owner | compute:None
|
| extra_dhcp_opts |
|
| fixed_ips | {"subnet_id": "86849224-a0a7-4059-a6b0-689a2b35c995",
"ip_address": "10.254.4.64"} |
| id | 620187c5-b4ac-4aca-bdeb-96205503344d
|
| mac_address | fa:16:3e:8a:92:9b
|
| name |
|
| network_id | db078c2d-63f1-40c0-b6c3-b49de487362b
|
| security_groups | 8e12a661-09b5-41ac-ade8-fddf6d997262
|
| status | DOWN
|
| tenant_id | 85aa4ef08044470dab1608395e5cac26
|
+-----------------------+----------------------------------------------------------------------------------------------+
The logs of /var/log/neutron/server.log and /var/log/nova/nova-conductor.log
are in attachment.
Any suggestions will be grateful.
Thanks.
Yu__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
