Sam, Thanks, But I failed to install two compute nodes if tacker is enabled, I’m not sure if tacker depends on Netron L3, can you share local.conf for two compute nodes case with tacker enabled.
From: Sam Hague [mailto:sha...@redhat.com] Sent: Friday, November 20, 2015 9:19 PM To: Yang, Yi Y <yi.y.y...@intel.com> Cc: openstack-dev@lists.openstack.org; Flavio Fernandes <ffern...@redhat.com>; Tim Rozet <tro...@redhat.com>; Andre Fredette <afrede...@redhat.com> Subject: Re: [openstack-dev] [Neutron] How are Tenant VMs' traffic routed to Service VMs Yi, yes, you just create a router and connect the two networks to it. The router will ensure traffic works between the two networks/subnets. Add the router and then just add each subnet to the router. Something like the below: neutron net-create vx-net --provider:network_type vxlan --provider:segmentation_id 1500 neutron net-create vx-net2 --provider:network_type vxlan --provider:segmentation_id 1501 neutron subnet-create vx-net 10.100.5.0/24<http://10.100.5.0/24> --name vx-subnet --dns-nameserver 8.8.8.8 neutron subnet-create vx-net2 10.100.6.0/24<http://10.100.6.0/24> --name vx-subnet2 --dns-nameserver 8.8.8.8 neutron net-create ext-net neutron router-interface-add ext-rtr vx-subnet neutron router-interface-add ext-rtr vx-subnet2 Thanks, Sam On Fri, Nov 20, 2015 at 2:52 AM, Yang, Yi Y <yi.y.y...@intel.com<mailto:yi.y.y...@intel.com>> wrote: Hi, folks I'm trying tacker to start some service VMs as Service Function VNF by "heat" tenant user, service VMs have special Neutron net & subnet, other common tenant VMs will have their own Neutron net & subnet, my question is how to route the traffic to service VMs in Openstack environment, DVR or router? I integrated Opendaylight and used Opendaylight ML2 driver (https://github.com/openstack/networking-odl), in that case, I used its L3 routing plugin instead of Neutron L3, I also integrated ovsdb, from ovsdb perspective, ARP response and L3 routing are done by openflow tables, so can openflow tables do the same thing to routing the traffic between tenant VMs and service VMs? Network topology looks like the below diagram. +--------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ |Compute Node 1 | |Compute Node 2 | | | | | | | | | | | | | | | | | | | | | | +--------------------+ +---------------------+ | | +--------------------+ +-----------------+ | | |Tenant VM1 | |Service VMx | | | |Tenant VM2 | |Service VMy| | | | 10.0.0.3 | | 11.0.0.3 | | | | 10.0.0.4 | | 11.0.0.4 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | +-------eth0-------+ +--------eth0------+ | | +-------eth0-------+ +------eth0-----+ | | | | | | | | | | | | | | | | | | tap0 tap1 | | tap0 tap1 | | | ovs | | | | ovs | | | +-------------br-int------------+ | | +------------br-int------------+ | | | | | | | | +----------------+---------------+ | | +----------------+---------------+ | | | | | | | | | | VxLAN1 VxLAN-gpe1 | | VxLAN1 VxLAN-gpe1 | | | | | |-------------------------------------eth1---------------------------------+ + ---------------------------------------eth1-----------------------------+ 192.188.50.3| | 192.168.50.4 +===========================================================================+
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev