Thanks Salman. But in my case MTU sizes are same. Anybody having any other opinion on this?
Regards, Amit On Sun, Feb 5, 2017 at 2:13 AM, Salman Toor <salman.t...@it.uu.se> wrote: > > <https://mail.uu.se/owa/?ae=PreFormAction&a=ReplyAll&t=IPM.Note&id=RgAAAAAYgm11jTMZSqDNQIKZhLPSBwCZtICTEb9DQLldDzcg6sC7AAAADML5AACZtICTEb9DQLldDzcg6sC7AABJX%2fCxAAAJ&pspid=_1486240160008_300721368#> > Hi, > > I am not an expert but I had similar problem and that was because of > different MTU at host interface and container's interface. > > My suggestion will be to check the MTU, if that helps. > > Regards.. > Salman. > > > PhD, Scientific Computing > Researcher, IT Department, > Uppsala University. > Senior Cloud Architect, > SNIC. > Cloud Application Expert, > UPPMAX. > salman.t...@it.uu.se > <https://mail.uu.se/owa/redir.aspx?REF=m0Eyh6bAe3V0K5jcrZeIkUVJw4_716jYUS9Yd1fJMFOsyyE71yXTCAFtYWlsdG86c2FsbWFuLnRvb3JAaXQudXUuc2U.> > http://www.it.uu.se/katalog/salto690 > ------------------------------ > *From:* Amit Kumar [ebiib...@gmail.com] > *Sent:* Saturday, February 04, 2017 7:22 PM > *To:* openstack-operators@lists.openstack.org > *Subject:* [Openstack-operators] OSA Newton Release Deployment in test > environment > > Hi All, > > I am trying to prepare test environment as mentioned in the following > link. I am using two VMs created in Virtualbox. One will be Infra Node and > other will be Compute Node. "Block Storage Host" is not present in my > deployment. > http://docs.openstack.org/project-deploy-guide/ > openstack-ansible/newton/app-config-test.html#test-environment-config > > While following instructions in Newton deployment guide ( > http://docs.openstack.org/project-deploy-guide/openstack-ansible/newton/), > at "Run Playbooks" step, "openstack-ansible setup-hosts.yml" is successful > but "openstack-ansible setup-infrastructure.yml" is failing. > > It is failing for " infra1_repo_container-" and is failing at "TASK > [pip_install : Install apt packages] ****************************** > ********" > Here is the failure text: > failed: [infra1_repo_container-f9649c00] (item=[u'build-essential', > u'python-setuptools', u'libffi-dev', u'libssl-dev', u'python-dev', > u'python-openssl', u'python-pyasn1']) => {"cache_update_time": 0, > "cache_updated": false, "failed": true, "invocation": {"module_args": > {"allow_unauthenticated": false, "autoremove": false, "cache_valid_time": > null, "deb": null, "default_release": null, "dpkg_options": > "force-confdef,force-confold", "force": false, "install_recommends": null, > "name": ["build-essential", "python-setuptools", "libffi-dev", > "libssl-dev", "python-dev", "python-openssl", "python-pyasn1"], > "only_upgrade": false, "package": ["build-essential", "python-setuptools", > "libffi-dev", "libssl-dev", "python-dev", "python-openssl", > "python-pyasn1"], "purge": false, "state": "latest", "update_cache": false, > "upgrade": null}, "module_name": "apt"}, "item": ["build-essential", > "python-setuptools", "libffi-dev", "libssl-dev", "python-dev", > "python-openssl", "python-pyasn1"], "msg": "'/usr/bin/apt-get -y -o > \"Dpkg::Options::=--force-confdef\" -o \"Dpkg::Options::=--force-confold\" > install 'python-setuptools' 'python-openssl' 'python-pyasn1'' failed: E: > There are problems and -y was used without --force-yes\n", "stderr": "E: > There are problems and -y was used without --force-yes\n", "stdout": > "Reading package lists...\nBuilding dependency tree...\nReading state > information...\nThe following extra packages will be installed:\n > python-pkg-resources\nSuggested packages:\n python-openssl-doc > python-openssl-dbg python-distribute\n python-distribute-doc doc-base\nThe > following NEW packages will be installed:\n python-openssl > python-pkg-resources python-pyasn1 python-setuptools\n0 upgraded, 4 newly > installed, 0 to remove and 4 not upgraded.\nNeed to get 418 kB of > archives.\nAfter this operation, 1801 kB of additional disk space will be > used.\nWARNING: The following packages cannot be authenticated!\n > python-pkg-resources python-setuptools\n", "stdout_lines": ["Reading > package lists...", "Building dependency tree...", "Reading state > information...", "The following extra packages will be installed:", " > python-pkg-resources", "Suggested packages:", " python-openssl-doc > python-openssl-dbg python-distribute", " python-distribute-doc doc-base", > "The following NEW packages will be installed:", " python-openssl > python-pkg-resources python-pyasn1 python-setuptools", "0 upgraded, 4 newly > installed, 0 to remove and 4 not upgraded.", "Need to get 418 kB of > archives.", "After this operation, 1801 kB of additional disk space will be > used.", "WARNING: The following packages cannot be authenticated!", " > python-pkg-resources python-setuptools"]} > > On looking around, it seems that it is happening because LXC are lacking > connectivity to internet. So, as per the link: http://docs.openstack.org/ > developer/openstack-ansible/developer-docs/installation- > hosts-limited-connectivity.html > I tried the step mentioned at this page under heading "Install pip > through deployment host" but it is giving following error. > > "fatal: [infra1]: FAILED! => {"changed": true, "cmd": "python > /opt/get-pip.py --isolated --no-index --find-links=/tmp/pip_install > pip==8.1.2 setuptools==28.6.0 wheel==0.29.0", "delta": "0:00:00.740516", > "end": "2017-02-04 22:58:12.985852", "failed": true, "invocation": > {"module_args": {"_raw_params": "python /opt/get-pip.py --isolated > --no-index --find-links=/tmp/pip_install pip==8.1.2 setuptools==28.6.0 > wheel==0.29.0", "_uses_shell": true, "chdir": null, "creates": null, > "executable": null, "removes": null, "warn": true}, "module_name": > "command"}, "rc": 1, "start": "2017-02-04 22:58:12.245336", "stderr": "Url > '/tmp/pip_install' is ignored. It is either a non-existing path or lacks a > specific scheme.\n Url '/tmp/pip_install' is ignored. It is either a > non-existing path or lacks a specific scheme.\n Could not find a version > that satisfies the requirement setuptools==28.6.0 (from versions: )\nNo > matching distribution found for setuptools==28.6.0", "stdout": "Requirement > already up-to-date: pip==8.1.2 in > /usr/local/lib/python2.7/dist-packages\nCollecting > setuptools==28.6.0", "stdout_lines": ["Requirement already up-to-date: > pip==8.1.2 in /usr/local/lib/python2.7/dist-packages", "Collecting > setuptools==28.6.0"], "warnings": []}" > > Please guide if you are aware of any solution to this problem. > > Thanks. > > Regards, > Amit >
_______________________________________________ OpenStack-operators mailing list OpenStack-operators@lists.openstack.org http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators