Thanks Yamahata. I have tried the all-in-one configuration and it worked without any problems. I will soon try the multi-node setup and will let you know of any problems/questions.
I appreciate all the hard work that openstack community is putting in the project. Thanks, Salman > Date: Thu, 17 May 2012 21:04:23 +0900 > From: yamah...@valinux.co.jp > To: salma...@live.com > CC: openstack@lists.launchpad.net > Subject: Re: [Openstack] Understanding Integration Bridge and MACs > > Hi. Sorry for delayed replay. > > Now precreated VM image is available for easy evaluation. > It is announced on ryu-de...@lists.sourceforge.net, > I site it for sure. I hope you can get successful result. > > > From: FUJITA Tomonori <fujita.tomonori@...> > > Subject: pre-configured VM image file for OpenStack environment with Ryu > > > > Hi, > > > > We created a VM image file that enables you to easily set up > > multi-node Nova environment with Ryu in your desktop machine: > > > > https://github.com/osrg/ryu/wiki/RYU-OpenStack-environment-VM-image-file-HOWTO > > > > Enjoy! > > On Sun, May 13, 2012 at 07:42:14PM -0500, Salman Malik wrote: > > Hi Dan and Others, > > > > I am trying to understand the actions taken by Ryu when the new instance > > sends > > DHCP discover message to dnsmasq. When I launch new instannce it keeps on > > sending discover messages and controller keeps on dropping these messages. > > But > > looking at the traffic I couldn't exactly map which MAC address belonged to > > which entity. Can someone help me with my understanding of the MAC > > addresses. > > Using ifconfig , "ovs-ofctl show br-int" and "ovs-ofctl snoop br-int" > > (output > > shown after MAC addresses), I know exactly about some MAC addresses and > > can't > > figure out some of them: > > > > Interfaces | HWAddress | IP-addr > > --------------------------------------------------------------------------------------------- > > eth0 | 08:00:27:7a:ff:65 | 10.0.3.15 > > eth1 | 08:00:27:16:d5:09 | > > 10.0.0.10 <========plugged into br-int > > gw-82bd3a73-dc | fa:16:3e:49:57:1b | 10.0.0.1 > > <==== > > ====plugged into br-int (this is the --listen-address of my two dnsmasqs) > > br-int | 08:00:27:16:d5:09 | > > <========why doesn't bridge have no IP ? > > new-instance | 02:d8:47:48:35:26 <====== MAC address of > > newly > > launched instance? (see output below) > > > > Unkown | fa:16:3e:5e:02:17 <======Seemingly unknown > > MAC address(which is related to the new instance?) > > Unkown | 33:33:00:00:00:16 <====== MAC address > > related to multicast ? > > > > > > Questions: > > > > 1. What is gw-82bd3a73-dc interface ? > > 2. I am kind of unsure why br-int is so useful? > > 3. Why doesn't br-int don't have any IP address? > > 4. Why do we need to plugin a compute node's interface to br-int? (so that > > guest instances on remote host can communicate with each other?) > > 5. What is the relationship b/w 02:d8:47:48:35:26 and fa:16:3e:5e:02:17 MAC > > addresses in the following output? > > > > ===================== > > Output of : ovs-ofctl snoop br-int > > ===================== > > OFPT_ECHO_REQUEST (xid=0x0): 0 bytes of payload > > OFPT_ECHO_REPLY (xid=0x0): 0 bytes of payload > > OFPT_PORT_STATUS (xid=0x0): ADD: 7(tap76127847-b1): addr:02:d8:47:48:35:26 > > config: 0 > > state: LINK_DOWN > > current: 10MB-FD COPPER > > OFPT_FLOW_MOD (xid=0x491662da): DEL priority=0 buf:0x0 actions=drop > > OFPT_BARRIER_REQUEST (xid=0x491662db): > > OFPT_BARRIER_REPLY (xid=0x491662db): > > OFPT_PORT_STATUS (xid=0x0): MOD: 7(tap76127847-b1): addr:02:d8:47:48:35:26 > > config: 0 > > state: 0 > > current: 10MB-FD COPPER > > OFPT_ECHO_REQUEST (xid=0x0): 0 bytes of payload > > OFPT_ECHO_REPLY (xid=0x0): 0 bytes of payload > > OFPT_PACKET_IN (xid=0x0): total_len=90 in_port=7 data_len=90 > > buffer=0x00000167 > > tunnel0:in_port0007:tci(0) macfa:16:3e:5e:02:17->33:33:00:00:00:16 type86dd > > proto58 tos0 ipv6::->ff02::16 port143->0 > > fa:16:3e:5e:02:17 > 33:33:00:00:00:16, ethertype IPv6 (0x86dd), length 90: > > :: > > > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), > > length 28 > > OFPT_PACKET_OUT (xid=0x491662dc): in_port=7 actions_len=0 actions=drop > > buffer= > > 0x00000167 > > OFPT_PACKET_IN (xid=0x0): total_len=322 in_port=7 data_len=128 buffer= > > 0x00000168 > > tunnel0:in_port0007:tci(0) macfa:16:3e:5e:02:17->ff:ff:ff:ff:ff:ff type0800 > > proto17 tos0 ip0.0.0.0->255.255.255.255 port68->67 > > fa:16:3e:5e:02:17 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 128: > > truncated-ip - 194 bytes missing! 0.0.0.0.68 > 255.255.255.255.67: > > BOOTP/DHCP, > > Request from fa:16:3e:5e:02:17, length 280 > > OFPT_PACKET_OUT (xid=0x491662dd): in_port=7 actions_len=0 actions=drop > > buffer= > > 0x00000168 > > OFPT_PACKET_IN (xid=0x0): total_len=78 in_port=7 data_len=78 > > buffer=0x00000169 > > fa:16:3e:5e:02:17 > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 128: > > truncated-ip - 194 bytes missing! 0.0.0.0.68 > 255.255.255.255.67: > > BOOTP/DHCP, > > Request from fa:16:3e:5e:02:17, length 280 > > OFPT_PACKET_OUT (xid=0x491662e3): in_port=7 actions_len=0 actions=drop > > buffer= > > 0x0000016e > > OFPT_PACKET_IN (xid=0x0): total_len=70 in_port=7 data_len=70 > > buffer=0x0000016f > > tunnel0:in_port0007:tci(0) macfa:16:3e:5e:02:17->33:33:00:00:00:02 type86dd > > proto58 tos0 ipv6fe80::f816:3eff:fe5e:217->ff02::2 port133->0 > > fa:16:3e:5e:02:17 > 33:33:00:00:00:02, ethertype IPv6 (0x86dd), length 70: > > fe80::f816:3eff:fe5e:217 > ff02::2: ICMP6, router solicitation, length 16 > > OFPT_PORT_STATUS (xid=0x0): MOD: 7(tap76127847-b1): addr:02:d8:47:48:35:26 > > config: 0 > > state: LINK_DOWN > > current: 10MB-FD COPPER > > OFPT_PORT_STATUS (xid=0x0): DEL: 7(tap76127847-b1): addr:02:d8:47:48:35:26 > > config: 0 > > state: LINK_DOWN > > current: 10MB-FD COPPER > > OFPT_FLOW_MOD (xid=0x491662e5): DEL priority=0,in_port=7 actions=drop > > OFPT_FLOW_MOD (xid=0x491662e6): DEL priority=0 actions=drop > > OFPT_BARRIER_REQUEST (xid=0x491662e7): > > OFPT_BARRIER_REPLY (xid=0x491662e7): > > > > Thanks! > > Salman > > > _______________________________________________ > > Mailing list: https://launchpad.net/~openstack > > Post to : openstack@lists.launchpad.net > > Unsubscribe : https://launchpad.net/~openstack > > More help : https://help.launchpad.net/ListHelp > > > -- > yamahata
_______________________________________________ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp