i'm install follow this docs http://docs.openstack.org/icehouse/install-guide/install/apt/content/ and i want to connect from controller node to instance network
2014-08-15 18:36 GMT+07:00 Andreas Scheuring <scheu...@linux.vnet.ibm.com>: > Hi, > just that we're on the same page. Please have a look at this picture: > > http://docs.openstack.org/havana/install-guide/install/apt/content/figures/3/a/common/figures/Neutron-PhysNet-Diagram.png > > With the provider network you create a network that matches the green > External & the purple api network (as you have a combined controller + > network node). This is where you already have vlan, right? > > And on the green data network you try to use gre, right? > > Or does you controller only have one physical nic for all kind of > traffic? > > > I'm sorry but I do not yet understand your setup and what you're trying > to achieve. > > Please keep always the mailing lists on cc, as others might also be > interested. > > > > Regards, > Andreas > > > > On Fri, 2014-08-15 at 14:21 +0700, Nhan Cao wrote: > > hi, > > i deploy on multinode with neutron and openvswitch. > > My Infrastructure has a exists VLAN, now, i'm using GRE type network. > > I found a article about that > > > http://trickycloud.wordpress.com/2013/11/12/setting-up-a-flat-network-with-neutron/ > > Could you give me a advice? i should choose VLAN or GRE for best? > > Thanks > > > > > > > > > > > > > > 2014-08-15 13:46 GMT+07:00 Andreas Scheuring > > <scheu...@linux.vnet.ibm.com>: > > Hi Nhan, > > I guess more information is required to help you out there. > > > > It would be helpful to know which setup you're using, e.g. a > > singlenode > > or multinode setup, openvswitch for network virtualiation or > > something > > else? Are you using nova network or neutron networking? > > > > If I got it right you created a tenant network in openstack > > (in your > > case vm network). In addition your host (hypervisor) has a an > > eth > > interface into the physical network, right? > > > > You also mentioned that your physical network is a vlan > > network. Is your > > hypervisor aware of this vlan tagging or is this done by a > > access port > > config in your switch? > > > > > > And what you want to achieve is to connect a vm attached to > > the > > openstack vm network to your physical vlan network. Did I get > > you right? > > > > Basically you would create a so called "provider network" that > > represents your physical network and connect this provider > > network via a > > virtual router to your vm network. > > > > More information you can find here: > > > http://docs.openstack.org/admin-guide-cloud/content/under_the_hood_openvswitch.html#under_the_hood_openvswitch_scenario1 > > > > > > Regards, > > Andreas > > > > > > > > On Fri, 2014-08-15 at 00:00 +0700, Nhan Cao wrote: > > > Hi > > > I have to network: > > > vm network: 10.2.21.0/24 > > > exist VLAN network: 192.168.1.0/24 > > > I want to connect from my VM network to physic VLAN network. > > > > > > How i config to connect? > > > > > > > > > > > > Thanks :) > > > > > > > > > > > _______________________________________________ > > > Mailing list: > > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > Post to : openstack@lists.openstack.org > > > Unsubscribe : > > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > > > > > > _______________________________________________ > > OpenStack-operators mailing list > > openstack-operat...@lists.openstack.org > > > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators > > > > > > > > _______________________________________________ > OpenStack-operators mailing list > openstack-operat...@lists.openstack.org > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack