Hi Christina, Is 131.154.96.28 configured as a floating IP and associated with the LB VIP port? The NAT is configured on the router connected to the VIP network, in this case private_net. Can the router access the VIP 10.0.1.22? I’d start there.
James > On May 1, 2015, at 4:21 PM, Cristina Aiftimiei <cai...@gmail.com> wrote: > > Dear all, > > I have a problem when configuring LBaaS in Juno. > Our setup is an OpenStack Juno with 2 controller and 2 network nodes in HA, > using HAproxy & Keepalived. > > After playing with the Havana version, where services were not in HA (just 1 > controller and 1 network-node) and where everything was working as explained > in all posts and blogs that I found around (mainly based on > https://wiki.openstack.org/wiki/Neutron/LBaaS/HowToRun > <https://wiki.openstack.org/wiki/Neutron/LBaaS/HowToRun>) I went on > configuring in a similar way the Juno version. > > Everyting went fine until the last check "curl<vip-floating-ip>" that says > "curl: (7) couldn't connect to host" (Connection timed out) > > Some details: > > $ neutron router-list > +--------------------------------------+----------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ > | id | name | external_gateway_info > > > | > +--------------------------------------+----------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ > | 0af31338-5aba-4dd3-9af5-6ba0050bea93 | myrouter | {"network_id": > "17d5949b-5694-4eab-abe0-c8039f0bd498", "enable_snat": true, > "external_fixed_ips": [{"subnet_id": "825bc708-c4f9-4684-8c20-8bddf7e5aa7b", > "ip_address": "131.154.96.19"}]} | > +--------------------------------------+----------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ > > $ neutron lb-pool-list > +--------------------------------------+--------+----------+-------------+----------+----------------+--------+ > | id | name | provider | lb_method | > protocol | admin_state_up | status | > +--------------------------------------+--------+----------+-------------+----------+----------------+--------+ > | 3ed76c5b-681b-46dc-80ac-83c6686adc18 | mypool | haproxy | ROUND_ROBIN | > HTTP | True | ACTIVE | > +--------------------------------------+--------+----------+-------------+----------+----------------+--------+ > > $ neutron lb-vip-list > +--------------------------------------+-------+-----------+----------+----------------+--------+ > | id | name | address | protocol | > admin_state_up | status | > +--------------------------------------+-------+-----------+----------+----------------+--------+ > | 824c9ee7-c9bd-40fd-91ff-1f2b88372f95 | myvip | 10.0.1.22 | HTTP | True > | ACTIVE | > +--------------------------------------+-------+-----------+----------+----------------+--------+ > > $ nova list > +--------------------------------------+------------+--------+------------+-------------+--------------------------------------+ > | ID | Name | Status | Task State | > Power State | Networks | > +--------------------------------------+------------+--------+------------+-------------+--------------------------------------+ > | 959f0059-f5a8-4085-b093-a1d30d22170c | jumphost | ACTIVE | - | > Running | private_net=10.0.1.10, 131.154.96.20 | > | 0ecbe8de-8219-4c05-9198-ce0b8cca8bc5 | webserver1 | ACTIVE | - | > Running | private_net=10.0.1.11 | > | ac62c3f3-5b2d-40f3-afb7-c83291541bf5 | webserver2 | ACTIVE | - | > Running | private_net=10.0.1.12 | > +--------------------------------------+------------+--------+------------+-------------+--------------------------------------+ > > # ip netns exec qlbaas-3ed76c5b-681b-46dc-80ac-83c6686adc18 curl > http://10.0.1.22 <http://10.0.1.22/> > Welcome to webserver1 > # ip netns exec qlbaas-3ed76c5b-681b-46dc-80ac-83c6686adc18 curl > http://10.0.1.22 <http://10.0.1.22/> > Welcome to webserver2 > > $ curl -vvv 131.154.96.28 > * About to connect() to 131.154.96.28 port 80 (#0) > * Trying 131.154.96.28... Connection timed out > * couldn't connect to host > * Closing connection #0 > curl: (7) couldn't connect to host > > Am I missing something? Where can I look for errors or missconfigurations? > > Thank you very much, > Cristina > > _______________________________________________ > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : openstack@lists.openstack.org > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
