Got a strange mailman message when i sent that out, sending again just in case the parsing borked it.
You're saying you had to manually create the "/etc/neutron/plugins/ml2/ml2_conf.ini" > file? Pretty sure it's created whenever Neutron is installed so I'd make > sure Neutron installed correctly. Don't mean to presume so check the > obvious first right? ; ) /adam *Adam Lawson* AQORN, Inc. 427 North Tatnall Street Ste. 58461 Wilmington, Delaware 19801-2230 Toll-free: (844) 4-AQORN-NOW ext. 101 International: +1 302-387-4660 Direct: +1 916-246-2072 On Sun, Aug 9, 2015 at 8:15 PM, Adam Lawson <alaw...@aqorn.com> wrote: > You're saying you had to manually create the > /etc/neutron/plugins/ml2/ml2_conf.ini file? Pretty sure it's created > whenever Neutron is installed so I'd make sure Neutron installed correctly. > Don't mean to presume so check the obvious first right? ; ) > > /adam > > > *Adam Lawson* > > AQORN, Inc. > 427 North Tatnall Street > Ste. 58461 > Wilmington, Delaware 19801-2230 > Toll-free: (844) 4-AQORN-NOW ext. 101 > International: +1 302-387-4660 > Direct: +1 916-246-2072 > > > On Sat, Aug 8, 2015 at 4:38 AM, Danny Choi (dannchoi) <dannc...@cisco.com> > wrote: > >> It shows port 8472 (otv) is still being used: >> >> [root@G10-QA4 ~]# netstat -a | grep udp >> >> *udp* 0 0 0.0.0.0:43320 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:58635 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:bootpc 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:ntp 0.0.0.0:* >> >> >> *udp* 0 0 localhost:323 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:sagxtsds 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:mdns 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:otv 0.0.0.0:* >> >> >> *udp* 0 0 0.0.0.0:memcache 0.0.0.0:* >> >> >> *udp*6 0 0 [::]:62175 [::]:* >> >> >> *udp*6 0 0 [::]:ntp [::]:* >> >> >> *udp*6 0 0 localhost:323 [::]:* >> >> >> [root@G10-QA4 ~]# ss -u -a >> >> State Recv-Q Send-Q >> Local Address:Port >> Peer Address:Port >> >> UNCONN 0 0 >> *:43320 >> *:* >> >> UNCONN 0 0 >> *:58635 >> *:* >> >> UNCONN 0 0 >> *:bootpc >> *:* >> >> UNCONN 0 0 >> *:ntp >> *:* >> >> UNCONN 0 0 >> 127.0.0.1:rpki-rtr >> *:* >> >> UNCONN 0 0 >> *:sagxtsds >> *:* >> >> UNCONN 0 0 >> *:mdns >> *:* >> >> UNCONN 0 0 >> *:otv >> *:* >> >> UNCONN 0 0 >> *:memcache >> *:* >> >> UNCONN 0 0 >> :::62175 >> :::* >> >> UNCONN 0 0 >> :::ntp >> :::* >> >> UNCONN 0 0 >> ::1:rpki-rtr >> :::* >> >> >> From: Remo Mattei <r...@italy1.com> >> Date: Friday, August 7, 2015 at 10:11 PM >> >> To: Danny Choi <dannc...@cisco.com> >> Cc: Erik McCormick <emccorm...@cirrusseven.com>, " >> openstack-operators-requ...@lists.openstack.org" < >> openstack-operators-requ...@lists.openstack.org>, " >> openstack@lists.openstack.org" <openstack@lists.openstack.org> >> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in >> Juno? >> >> You need to call for udp adding a switch to the command. The ss alone >> will not query look at the man page maybe -a works >> >> Inviato da iPhone >> >> Il giorno 07/ago/2015, alle ore 18:14, Danny Choi (dannchoi) < >> dannc...@cisco.com> ha scritto: >> >> Don’t see anything using ss and netstat: >> >> [root@G10-QA4 ~(keystone_admin)]# ss | grep 4789 >> >> [root@G10-QA4 ~(keystone_admin)]# netstat | grep 4789 >> >> [root@G10-QA4 ~(keystone_admin)]# >> >> From: Remo Mattei <r...@italy1.com> >> Date: Friday, August 7, 2015 at 5:16 PM >> To: Danny Choi <dannc...@cisco.com> >> Cc: Erik McCormick <emccorm...@cirrusseven.com>, " >> openstack-operators-requ...@lists.openstack.org" < >> openstack-operators-requ...@lists.openstack.org>, " >> openstack@lists.openstack.org" <openstack@lists.openstack.org> >> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in >> Juno? >> >> Check using ss or netstat and see if the port is open. >> >> Remo >> >> Inviato da iPhone >> >> Il giorno 07/ago/2015, alle ore 13:44, Danny Choi (dannchoi) < >> dannc...@cisco.com> ha scritto: >> >> Yes, I did restart the Neutron service. >> >> Danny >> >> From: Remo Mattei <r...@italy1.com> >> Date: Friday, August 7, 2015 at 4:42 PM >> To: Danny Choi <dannc...@cisco.com> >> Cc: Erik McCormick <emccorm...@cirrusseven.com>, " >> openstack-operators-requ...@lists.openstack.org" < >> openstack-operators-requ...@lists.openstack.org>, " >> openstack@lists.openstack.org" <openstack@lists.openstack.org> >> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in >> Juno? >> >> Did you restart the services? >> >> Inviato da iPhone >> >> Il giorno 07/ago/2015, alle ore 13:16, Danny Choi (dannchoi) < >> dannc...@cisco.com> ha scritto: >> >> Hi Erik, >> >> I added the following in ml2_config.ini file but it did not work; still >> using port 8472 afterwards. >> >> [agent] >> vxlan_udp_port=4789 >> >> Regards, >> Danny >> >> From: Erik McCormick <emccorm...@cirrusseven.com> >> Date: Friday, August 7, 2015 at 9:57 AM >> To: Danny Choi <dannc...@cisco.com> >> Cc: "openstack@lists.openstack.org" <openstack@lists.openstack.org>, " >> openstack-operators-requ...@lists.openstack.org" < >> openstack-operators-requ...@lists.openstack.org>, "Chow, Anthony T >> (Anthony)** CTR **" <anthony.c...@alcatel-lucent.com> >> Subject: Re: [Openstack] [Juno] How to set the VxLAN UDP port number in >> Juno? >> >> Yes. >> On Aug 7, 2015 9:17 AM, "Danny Choi (dannchoi)" <dannc...@cisco.com> >> wrote: >> >>> Hi Erik, >>> >>> Do you mean the ml2_config.ini file? >>> >>> Thanks, >>> Danny >>> >>> On 8/6/15, 6:08 PM, "Erik McCormick" <emccorm...@cirrusseven.com> wrote: >>> >>> >in your ML2 config >>> >[agent] >>> >vxlan_udp_port=4789 >>> > >>> >On Thu, Aug 6, 2015 at 5:46 PM, Chow, Anthony T (Anthony)** CTR ** >>> ><anthony.c...@alcatel-lucent.com> wrote: >>> >> Danny, >>> >> >>> >> >>> >> >>> >> Are you using Open vSwitch for your VXLAN? >>> >> >>> >> >>> >> >>> >> Anthony. >>> >> >>> >> >>> >> >>> >> From: Danny Choi (dannchoi) [mailto:dannc...@cisco.com] >>> >> Sent: Thursday, August 06, 2015 5:56 AM >>> >> To: openstack@lists.openstack.org; >>> >> openstack-operators-requ...@lists.openstack.org >>> >> Subject: [Openstack] [Juno] How to set the VxLAN UDP port number in >>> >>Juno? >>> >> >>> >> >>> >> >>> >> Hi, >>> >> >>> >> >>> >> >>> >> Linux default VxLAN UDP port is 8472. >>> >> >>> >> >>> >> >>> >> How to change it to IANA assigned port 4789 in Juno? >>> >> >>> >> >>> >> >>> >> Thanks, >>> >> >>> >> Danny >>> >> >>> >> >>> >> _______________________________________________ >>> >> Mailing list: >>> >>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> >> Post to : openstack@lists.openstack.org >>> >> Unsubscribe : >>> >>http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> >> >>> >>> _______________________________________________ >> Mailing list: >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> Post to : openstack@lists.openstack.org >> Unsubscribe : >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> >> >> >> !DSPAM:1,55c51a10247869866410012! >> >> !DSPAM:1,55c5583e69231918657901! >> >> >> _______________________________________________ >> Mailing list: >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> Post to : openstack@lists.openstack.org >> Unsubscribe : >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack