Hi, Le 03/03/2014 10:43, Andrew Wafaa a écrit : > On 28 February 2014 10:37, Guillaume Gardet <guillaume.gar...@free.fr> wrote: >> Le 27/02/2014 18:43, Andrew Wafaa a écrit : >>> On 27-02-2014 17:40, guillaume.gar...@free.fr wrote: >>>> ----- Andrew Wafaa <and...@wafaa.eu> a écrit : >>>>> On 27-02-2014 15:16, guillaume.gar...@free.fr wrote: >>>>>>> Output from print command: >>>>>>> # print >>>>>>> arch=arm >>>>>>> baudrate=115200 >>>>>>> board=omap5_uevm >>>>>>> board_name=omap5_uevm >>>>>>> bootcmd=run findfdt; run mmcboot;setenv mmcdev 1; setenv bootpart 1:2; >>>>>>> setenv mmcroot /dev/mmcblk0p2 rw; run mmcboot; >>>>>>> bootdelay=1 >>>>>>> bootdir=/boot >>>>>>> bootfile=zImage >>>>>>> bootpart=0:2 >>>>>>> bootscript=echo Running bootscript from mmc${mmcdev} ...; source >>>>>>> ${loadaddr} >>>>>>> console=ttyO2,115200n8 >>>>>>> cpu=armv7 >>>>>>> fdt_high=0xffffffff >>>>>>> fdtaddr=0x80F80000 >>>>>>> fdtfile=undefined >>>>>>> findfdt=if test $board_name = omap5_uevm; then setenv fdtfile >>>>>>> omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile >>>>>>> dra7-evm.dtb; fi;if test $fdtfile = undefined; then echo WARNING: >>>>>>> Could >>>>>>> not determine device tree to use; fi; >>>>>>> importbootenv=echo Importing environment from mmc${mmcdev} ...; env >>>>>>> import -t ${loadaddr} ${filesize} >>>>>>> loadaddr=0x80200000 >>>>>>> loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt >>>>>>> loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr >>>>>>> loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}; >>>>>>> loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile} >>>>>>> mmcargs=setenv bootargs console=${console} ${optargs} vram=${vram} >>>>>>> root=${mmcroot} rootfstype=${mmcrootfstype} >>>>>>> mmcboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on >>>>>>> device ${mmcdev};if run loadbootenv; then echo Loaded environment from >>>>>>> ${bootenv};run importbootenv;fi;if test -n $uenvcmd; then echo Running >>>>>>> uenvcmd ...;run uenvcmd;fi;if run loadimage; then run loadfdt; echo >>>>>>> Booting from mmc${mmcdev} ...; run mmcargs; bootz ${loadaddr} - >>>>>>> ${fdtaddr}; fi;fi; >>>>>>> mmcdev=0 >>>>>>> mmcroot=/dev/mmcblk1p2 rw >>>>>>> mmcrootfstype=ext4 rootwait >>>>>>> partitions=uuid_disk=${uuid_gpt_disk};name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs} >>>>>>> rdaddr=0x81000000 >>>>>>> scsidevs=0 >>>>>>> soc=omap5 >>>>>>> stderr=serial >>>>>>> stdin=serial >>>>>>> stdout=serial >>>>>>> usbethaddr=02:21:03:5f:0e:70 >>>>>>> usbtty=cdc_acm >>>>>>> vendor=ti >>>>>>> ver=U-Boot 2014.01 (Feb 25 2014 - 21:55:07) >>>>>>> vram=16M >>>>>>> >>>>>>> Environment size: 1904/131067 bytes >>>>>>> >>>>>> You still have an old image. I mean your image does not include all >>>>>> your patches for u-boot. >>>>>> >>>>>> Try to type: >>>>>> mmc dev 1 (or mmc dev 0) >>>>>> mmc rescan >>>>>> load mmc 0:1 0x82000000 boot.scr >>>>>> >>>>>> It should load your boot.scr script. >>>>>> >>>>> It seems to load the boot.scr without error, but still fails to boot. >>>> Forgot to add 'source 0x82000000' to run boot.scr script. >>>> >>>> >>>>>>>> Maybe try also 'run loadbootscript' command. >>>>>>>> >>>>>>> This results in ** Unrecognized filesystem type ** >>>>>> Look at your loadbootscript var: >>>>>> loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr >>>>>> >>>>>> I guess your boot partition is EXT2, 3 or 4, not FAT? >>>>>> >>>>> I'm somewhat confused. I can't see why it is getting fatload, everything >>>>> I can see says either ext2 as the filesystem type and loadscript=load. >>>>> Why fatload is getting there I just don't know. >>>>> >>>> Because you are using a non patched u-boot. >>>> >>> I copied u-boot from openSUSE:Factory:ARM, so how come it's unpatched, >>> where can I get the correct one? >> I mean your are not using your latest u-boot-omap5uevm. >>>>> Where should uEnv.txt be located? >>>> We do not use it, so I do not know. >>>> >>> OK, I'm not sure if it's needed or not. I know Nishanth mentioned using it, >>> but I don't think it's vital. >> If your boot.scr is ok, then you do not need it. >> >> >> Guillaume >> > > Getting a little closer to getting it working but still failing. > Attached is the latest log I have from booting, any ideas?
Your error: [1393545598.566144] Searching for boot device... [1393545616.599068] Failed to find boot device ! [1393545616.605305] rebootException: reboot in 120 sec... has been seen on other systems too. Maybe not related to your OMAP5. It is a Factory image, right? Could you try to build your image against 13.1, please? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org