Le 11/12/2015 10:10, Matwey V. Kornilov a écrit :
2015-12-11 12:04 GMT+03:00 Guillaume Gardet <guillaume.gar...@free.fr>:
Hi,
Le 11/12/2015 09:55, Matwey V. Kornilov a écrit :
Hello,
I am using
openSUSE-Tumbleweed-ARM-JeOS-beaglebone.armv7l-1.12.1-Build350.1.raw
from openSUSE:Factory:ARM and see the following:
U-Boot SPL 2016.01-rc1 (Dec 01 2015 - 16:30:32)
bad magic
bad magic
spl_register_fat_device: fat register err - -1
spl_register_fat_device: fat register err - -1
spl_load_image_fat: error reading image u-boot.img, err - -1
spl: ext4fs_open failed
spl: ext4fs_open failed
spl_load_image_ext: error reading image uImage, err - -1
U-Boot 2016.01-rc1 (Dec 01 2015 - 16:30:32 +0000)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Error - No Valid Environment Area found
*** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
=>
Something is probably wrong.
What happen if you type 'boot' command?
It boots! Magic!
Thank you, but why it doesn't happen automatically?
Maybe you hit a key on your keyboard stopping autoboot?
Is the autoboot count down shown?
p.s. I am not sure that it is related to u-boot, but is there any reason
why rc-s of u-boot appear in Factory? Would it be better to test them on
kittens instead of users?
Most of the time, I test u-boot on boards available to me when I update it.
But, I do not have all boards supported by openSUSE, so it may break some
boards, but the sooner it is detected, the better it is! ;)
It makes sense.
Still would be great to have another JeOS which is guaranteed working
out of the box.
Standard release (13.2 or 13.1). ;)
Guillaume
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
