On Sonntag, 15. Juli 2018 15:24:25 CEST Freek de Kruijf wrote: > Apparently there are images for Tumbleweed and Leap 15.0 for the Banana Pi > M2. > > Question: Are there also images for the Banana Pi M3 or should the images > for Raspberry Pi 3B also work for this device?
TLDR: no M3 uses an Allwinner A83T, an 32 bit ARM processor with 8 cores. RPi3 uses a Broadcom BCM2837, a 64 bit ARM processor with 4 cores. For booting, you need a board specific image (unless you have one of the few boards which use UEFI, but these typically come in a case ready for deployment in you data center). The userland is the same for all boards with a common architecture, but 32 and 64 bit ARM are different. Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019
signature.asc
Description: This is a digitally signed message part.
