> -----Original Message-----
> From: Christian Gross <christian.gr...@centerofgravity.at>
> Sent: 23 April 2020 10:24
> To: opensuse-arm@opensuse.org
> Subject: [opensuse-arm] Leap 15.1 does not boot on DE0-Nano-SoC
>
> Hi,
>
> If I try to boot openSUSE-Leap-15.1-ARM-JeOS-socfpgade0nanosoc.armv7l it
> ends up showing the u-boot prompt: "=>"
>
> Running the boot command from there gives the following output
>
> => boot
> switch to partitions #0, OK
> mmc0 is current device
> ** Invalid partition 2 **
> ** Invalid partition 3 **
> ** Unrecognized filesystem type **
>
> Error: ethernet@ff702000 address not set.
> ...
>
> Any hints how I can further debug this?
Is your rootfs on mmc ?
Do you have multiple mmc devices maybe?
You can also list files from the partitions 1/2/3 from mmc0 device, with:
ls mmc 0:1
ls mmc 0:2
ls mmc 0:3
>
> Other Versions I tried
>
> openSUSE-Leap15.0-ARM-JeOS-socfpgade0nanosoc.armv7l-2018.07.02-
> Buildlp150.1.1
>
> Is booting, but cannot access any USB device.
You try to boot from mmc or usb?
>
> openSUSE-Leap-15.2-ARM-JeOS-socfpgade0nanosoc.armv7l-2020.02.26-
> Build1.63
> openSUSE-Tumbleweed-ARM-JeOS-socfpgade0nanosoc.armv7l-2020.03.25-
> Snapshot20200414
You may try latest openSUSE Tumbleweed image since u-boot has been updated to
version 2020.04 and lots of fpga patches landed in this version.
Cheers,
Guillaume
>
> Do not even get to u-boot.
>
> Thanks,
>
> Christian
>
>
>
>
>
> --
> To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
> To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the contents to any
other person, use it for any purpose, or store or copy the information in any
medium. Thank you.
N�����r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�����Ǩ�
