> -----Original Message-----
> From: Axel Braun <d...@opensuse.org>
> Sent: 24 April 2020 17:33
> To: opensuse-arm@opensuse.org
> Subject: Re: [opensuse-arm] Raspi4/Leap 15.2/wrong disk size
>
> Hello Fabian,
>
> Am Donnerstag, 23. April 2020, 11:13:34 CEST schrieb Fabian Vogt:
> > Am Mittwoch, 22. April 2020, 16:22:03 CEST schrieb Axel Braun:
> > > Hi,
> > > I'm trying the Raspi 4 image (openSUSE-Leap-15.2-ARM-LXQT-
> > > raspberrypi4.aarch64-2020.02.26-Build1.63.raw.xz) updated to the
> > > latest patch level, and encounter an issue with the reported disk
> > > size:
> > ...
> >
> > > Device Boot Start End Sectors Size Id Type
> > > /dev/mmcblk1p1 2048 133119 131072 64M c W95 FAT32 (LBA)
> > > /dev/mmcblk1p2 133120 1157119 1024000 500M 82 Linux swap /
> > > Solaris
> > > /dev/mmcblk1p3 1157120 61978769 60821650 29G 83 Linux
> > >
> > > -> so far so good, 29G available for /
> >
> > > But:
> > ...
> >
> > > -> only 4G for / in the running system, ext4 file system.
> > > (I fixed this with resize2fs)
> > >
> > > Is this an issue of the used image?
> >
> > Sounds like kiwi didn't resize the filesystem on the first boot.
> > Can you reproduce this? Add "rd.kiwi.debug=1" to the kernel cmdline
> > and you'll get a log file in /run/initramfs/log.
>
> Just tried this, but keyboard is not reacting at that stage (means: 'E' at
> the grub
> screen does not work, interruption of autoboot does not work either) ...
> although I used the keyboard with the Raspi3 before
U-boot for RPi4 does not have USB support yet, so you cannot use USB keyboard
for u-boot, nor grub!
Guillaume
>
> @Alexander - thanks for the Wiki-Page! I would need to get some hardware for
> this first....
>
> Cheers
> Axel
>
>
>
> --
> To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
> To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the contents to any
other person, use it for any purpose, or store or copy the information in any
medium. Thank you.
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
