Hello community,
here is the log from the commit of package lvm2 for openSUSE:Factory checked in
at 2017-12-21 11:26:51
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/lvm2 (Old)
and /work/SRC/openSUSE:Factory/.lvm2.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "lvm2"
Thu Dec 21 11:26:51 2017 rev:112 rq:558349 version:2.02.177
Changes:
--------
--- /work/SRC/openSUSE:Factory/lvm2/device-mapper.changes 2017-11-30
12:41:54.193527637 +0100
+++ /work/SRC/openSUSE:Factory/.lvm2.new/device-mapper.changes 2017-12-21
11:26:56.522575199 +0100
@@ -1,0 +2,38 @@
+Tue Dec 19 07:35:11 UTC 2017 - z...@suse.com
+
+- device-mapper.spec: fix wrong replacement of DM_VERSION (bsc#1072524)
+- Fixes failure of some testcases caused by nc behavior change (bsc#1072624)
+ + bug-1072624_test-lvmetad_dump-always-timed-out-when-using-nc.patch
+- Refreshed fate-31841_fsadm-add-support-for-btrfs.patch
+- Update to LVM2.2.02.177
+ When writing text metadata content, use complete 4096 byte blocks.
+ Change text format metadata alignment from 512 to 4096 bytes.
+ When writing metadata, consistently skip mdas marked as failed.
+ Refactor and adjust text format metadata alignment calculation.
+ Ensure _node_send_message always uses clean status of thin pool.
+ Fix lvmlockd to use pool lock when accessing _tmeta volume.
+ Report expected sanlock_convert errors only when retries fail.
+ Avoid blocking in sanlock_convert on SH to EX lock conversion.
+ Deactivate missing raid LV legs (_rimage_X-missing_Y_Z) on decativation.
+ Categorise I/O with reason annotations in debug messages.
+ Allow extending of raid LVs created with --nosync after a failed repair.
+ Command will lock memory only when suspending volumes.
+ Merge segments when pvmove is finished.
+ Activation code for pvmove automatically discovers holding LVs for resume.
+ Make a pvmove LV locking holder.
+ Do not change critical section counter on resume path without real resume.
+ Enhance activation code to automatically suspend pvmove participants.
+ Prevent conversion of thin volumes to snapshot origin when lvmlockd is used.
+ Add support for pvmove of cache and snapshot origins.
+ Avoid using precommitted metadata for suspending pvmove tree.
+ Deactivate activated LVs on error path when pvmove activation fails.
+ Add "io" to log/debug_classes for logging low-level I/O.
+ Avoid importing persistent filter in vgscan/pvscan/vgrename.
+ Fix memleak of string buffer when vgcfgbackup runs in secure mode.
+ Do not print error when clvmd cannot find running clvmd.
+ Prevent start of new merge of snapshot if origin is already being merged.
+ Fix offered type for raid6_n_6 to raid5 conversion (raid5_n).
+ Deactivate sub LVs when removing unused cache-pool.
+ Do not take backup with suspended devices.
+
+-------------------------------------------------------------------
lvm2-clvm.changes: same change
lvm2.changes: same change
Old:
----
LVM2.2.02.176.tgz
LVM2.2.02.176.tgz.asc
New:
----
LVM2.2.02.177.tgz
LVM2.2.02.177.tgz.asc
bug-1072624_test-lvmetad_dump-always-timed-out-when-using-nc.patch
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ device-mapper.spec ++++++
--- /var/tmp/diff_new_pack.CGYdBH/_old 2017-12-21 11:26:57.498527613 +0100
+++ /var/tmp/diff_new_pack.CGYdBH/_new 2017-12-21 11:26:57.502527417 +0100
@@ -19,8 +19,8 @@
%define libname libdevmapper1_03
%define libname_event libdevmapper-event1_03
### COMMON-DEF-BEGIN ###
-%define lvm2_version 2.02.176
-%define device_mapper_version 1.02.145
+%define lvm2_version 2.02.177
+%define device_mapper_version 1.02.146
%define thin_provisioning_version 0.7.0
### COMMON-DEF-END ###
Name: device-mapper
@@ -51,15 +51,11 @@
# SUSE patches: 1000+ for LVM
# Never upstream
Patch1001: cmirrord_remove_date_time_from_compilation.patch
-#fate#309425
Patch1002: fate-309425_display-dm-name-for-lv-name.patch
-#FATE#318413
Patch1003: fate-31841_fsadm-add-support-for-btrfs.patch
-#bsc#935623
Patch1004: bug-935623_dmeventd-fix-dso-name-wrong-compare.patch
#SUSE patches 2000+ for device mapper, udev rules
-#bsc#1012973
Patch2001:
bug-1012973_simplify-special-case-for-md-in-69-dm-lvm-metadata.patch
### COMMON-PATCH-END ###
@@ -82,7 +78,7 @@
### COMMON-CONFIG-BEGIN ###
export PATH=$PATH:/sbin:%{_prefix}/sbin
# Why this messy fix here? someone released a wrong version...
-sed -ie "s/1.02.*/1.03.01/g" VERSION_DM
+sed -ie "s/%{device_mapper_version}/1.03.01/g" VERSION_DM
%configure \
--enable-dmeventd \
--enable-cmdlib \
++++++ lvm2-clvm.spec ++++++
--- /var/tmp/diff_new_pack.CGYdBH/_old 2017-12-21 11:26:57.526526247 +0100
+++ /var/tmp/diff_new_pack.CGYdBH/_new 2017-12-21 11:26:57.530526052 +0100
@@ -19,8 +19,8 @@
%define dlm_version 3.99.1
%define sanlock_version 3.3.0
### COMMON-DEF-BEGIN ###
-%define lvm2_version 2.02.176
-%define device_mapper_version 1.02.145
+%define lvm2_version 2.02.177
+%define device_mapper_version 1.02.146
%define thin_provisioning_version 0.7.0
### COMMON-DEF-END ###
Name: lvm2-clvm
@@ -52,15 +52,11 @@
# SUSE patches: 1000+ for LVM
# Never upstream
Patch1001: cmirrord_remove_date_time_from_compilation.patch
-#fate#309425
Patch1002: fate-309425_display-dm-name-for-lv-name.patch
-#FATE#318413
Patch1003: fate-31841_fsadm-add-support-for-btrfs.patch
-#bsc#935623
Patch1004: bug-935623_dmeventd-fix-dso-name-wrong-compare.patch
#SUSE patches 2000+ for device mapper, udev rules
-#bsc#1012973
Patch2001:
bug-1012973_simplify-special-case-for-md-in-69-dm-lvm-metadata.patch
### COMMON-PATCH-END ###
@@ -99,7 +95,7 @@
### COMMON-CONFIG-BEGIN ###
export PATH=$PATH:/sbin:%{_prefix}/sbin
# Why this messy fix here? someone released a wrong version...
-sed -ie "s/1.02.*/1.03.01/g" VERSION_DM
+sed -ie "s/%{device_mapper_version}/1.03.01/g" VERSION_DM
%configure \
--enable-dmeventd \
--enable-cmdlib \
++++++ lvm2.spec ++++++
--- /var/tmp/diff_new_pack.CGYdBH/_old 2017-12-21 11:26:57.546525272 +0100
+++ /var/tmp/diff_new_pack.CGYdBH/_new 2017-12-21 11:26:57.550525077 +0100
@@ -21,8 +21,8 @@
%define cmdlib liblvm2cmd2_02
### COMMON-DEF-BEGIN ###
-%define lvm2_version 2.02.176
-%define device_mapper_version 1.02.145
+%define lvm2_version 2.02.177
+%define device_mapper_version 1.02.146
%define thin_provisioning_version 0.7.0
### COMMON-DEF-END ###
@@ -62,24 +62,20 @@
# SUSE patches: 1000+ for LVM
# Never upstream
Patch1001: cmirrord_remove_date_time_from_compilation.patch
-#fate#309425
Patch1002: fate-309425_display-dm-name-for-lv-name.patch
-#FATE#318413
Patch1003: fate-31841_fsadm-add-support-for-btrfs.patch
-#bsc#935623
Patch1004: bug-935623_dmeventd-fix-dso-name-wrong-compare.patch
#SUSE patches 2000+ for device mapper, udev rules
-#bsc#1012973
Patch2001:
bug-1012973_simplify-special-case-for-md-in-69-dm-lvm-metadata.patch
### COMMON-PATCH-END ###
# 3000+ for test code
-#bsc#1043040
Patch3001: bug-950089_test-fix-lvm2-testsuite-build-error.patch
Patch3002: bug-1043040_test-fix-read-ahead-issues-in-test-scripts.patch
+Patch3003:
bug-1072624_test-lvmetad_dump-always-timed-out-when-using-nc.patch
-#bsc#1037309
+# patches specif for lvm2.spec
Patch4001:
bug-1037309_Makefile-skip-compliling-daemons-lvmlockd-directory.patch
%description
@@ -98,6 +94,7 @@
%patch3001 -p1
%patch3002 -p1
+%patch3003 -p1
%patch4001 -p1
%build
@@ -117,7 +114,7 @@
### COMMON-CONFIG-BEGIN ###
export PATH=$PATH:/sbin:%{_prefix}/sbin
# Why this messy fix here? someone released a wrong version...
-sed -ie "s/1.02.*/1.03.01/g" VERSION_DM
+sed -ie "s/%{device_mapper_version}/1.03.01/g" VERSION_DM
%configure \
--enable-dmeventd \
--enable-cmdlib \
++++++ LVM2.2.02.176.tgz -> LVM2.2.02.177.tgz ++++++
++++ 9975 lines of diff (skipped)
++++++ bug-1072624_test-lvmetad_dump-always-timed-out-when-using-nc.patch ++++++
>From 6ff44e96eb804f9024bf3f606d207bd863f0e672 Mon Sep 17 00:00:00 2001
From: Eric Ren <z...@suse.com>
Date: Wed, 13 Dec 2017 18:53:00 +0800
Subject: [PATCH] test: lvmetad_dump always timed out when using nc
lvmetad_dump uses either "socat" or "nc" to communicate
with lvmetad. But when using "nc" if "socat" is not
available, nc will listen forever by default, causing the
testcase timed out.
Signed-off-by: Eric Ren <z...@suse.com>
---
test/lib/aux.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/test/lib/aux.sh b/test/lib/aux.sh
index 6bc7bd47e..4603c1504 100644
--- a/test/lib/aux.sh
+++ b/test/lib/aux.sh
@@ -243,14 +243,14 @@ lvmetad_talk() {
local use=nc
if type -p socat >& /dev/null; then
use=socat
- elif echo | not nc -U "$TESTDIR/lvmetad.socket" ; then
+ elif echo | not nc -w 1 -U "$TESTDIR/lvmetad.socket" ; then
echo "WARNING: Neither socat nor nc -U seems to be available."
1>&2
echo "## failed to contact lvmetad."
return 1
fi
if test "$use" = nc ; then
- nc -U "$TESTDIR/lvmetad.socket"
+ nc -w 1 -U "$TESTDIR/lvmetad.socket"
else
socat "unix-connect:$TESTDIR/lvmetad.socket" -
fi | tee -a lvmetad-talk.txt
--
2.13.6
++++++ fate-31841_fsadm-add-support-for-btrfs.patch ++++++
--- /var/tmp/diff_new_pack.CGYdBH/_old 2017-12-21 11:26:58.034501479 +0100
+++ /var/tmp/diff_new_pack.CGYdBH/_new 2017-12-21 11:26:58.034501479 +0100
@@ -1,4 +1,4 @@
-From 701999ed1d48cadb34084253c698fb9b45763499 Mon Sep 17 00:00:00 2001
+From 0e1c896caaabdf0de38466951ea281f02fe8bb77 Mon Sep 17 00:00:00 2001
From: Eric Ren <z...@suse.com>
Date: Thu, 6 Jul 2017 17:42:58 +0800
Subject: [PATCH] fsadm: add support for btrfs
@@ -13,7 +13,7 @@
1 file changed, 72 insertions(+), 3 deletions(-)
diff --git a/scripts/fsadm.sh b/scripts/fsadm.sh
-index 4f402ce..6501e34 100755
+index a09b91534..2a29d5ad5 100755
--- a/scripts/fsadm.sh
+++ b/scripts/fsadm.sh
@@ -22,6 +22,7 @@
@@ -92,7 +92,7 @@
elif test -e "$PROCMOUNTS"; then
detect_mounted_with_proc_mounts
@@ -654,6 +690,32 @@ resize_crypt() {
- dry $CRYPTSETUP resize "$1" --size $CRYPT_RESIZE_BLOCKS || error
"$CRYPTSETUP failed to resize device $1"
+ dry "$CRYPTSETUP" resize "$1" --size $CRYPT_RESIZE_BLOCKS || error
"$CRYPTSETUP failed to resize device $1"
}
+########################
@@ -126,7 +126,7 @@
####################
@@ -676,6 +738,7 @@ resize() {
"crypto_LUKS")
- which $CRYPTSETUP > /dev/null 2>&1 || error "$CRYPTSETUP
utility required to resize LUKS volume"
+ which "$CRYPTSETUP" > /dev/null 2>&1 || error "$CRYPTSETUP
utility required to resize LUKS volume"
resize_luks $NEWSIZE ;;
+ "btrfs") resize_btrfs $NEWSIZE ;;
*) error "Filesystem \"$FSTYPE\" on device \"$VOLUME\" is not
supported by this tool." ;;
@@ -134,7 +134,7 @@
test -z "$CRYPT_SHRINK" || resize_crypt "$VOLUME_ORIG"
@@ -748,6 +811,12 @@ check() {
"crypto_LUKS")
- which $CRYPTSETUP > /dev/null 2>&1 || error "$CRYPTSETUP
utility required."
+ which "$CRYPTSETUP" > /dev/null 2>&1 || error "$CRYPTSETUP
utility required."
check_luks ;;
+ "btrfs") #mount the device first and then run scrub
+ MOUNTPOINT=$TEMPDIR
@@ -155,5 +155,5 @@
done
--
-2.10.2
+2.13.6
