Hello community, here is the log from the commit of package raspberrypi-firmware for openSUSE:Factory checked in at 2018-06-08 23:17:51 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old) and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware" Fri Jun 8 23:17:51 2018 rev:34 rq:614851 version:2018.06.03 Changes: -------- --- /work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config.changes 2018-04-23 15:26:10.373869767 +0200 +++ /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new/raspberrypi-firmware-config.changes 2018-06-08 23:17:54.746761191 +0200 @@ -1,0 +2,24 @@ +Thu Jun 7 07:35:12 UTC 2018 - guillaume.gar...@opensuse.org + +- Update to ab802d3 (2018-06-03): + * revert: sdram: Reduce address skew from -10 to -5 + * sdram: Reduce address skew from -10 to -5 + * platform: Avoid improving the schmoo on Pi3+ + * platform: Latest AVS rules + * sdram: Increase read/write latency for higher sdram frequencies + * power: Add boot-time 3b+ PMIC register logging + * power: Continue to probe PMIC after error + * Match phy setup same as bootcode for device mode initialisation + * Add logging_messages to UART + * Fix 3B+ bootcode.bin only booting + * video_encode: Filter the list of encoders based on variant + * mmal: Relax requirement on a buffer in mmal_port_send_buffer + * platform: avs: Also apply chicken bits to boost voltage + + +------------------------------------------------------------------- +Thu May 24 11:25:26 UTC 2018 - fv...@suse.com + +- Allow u-boot to set arm_control to support 32-bit images on RPi3 + +------------------------------------------------------------------- --- /work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware.changes 2018-04-23 15:26:11.445830826 +0200 +++ /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new/raspberrypi-firmware.changes 2018-06-08 23:17:54.778760035 +0200 @@ -1,0 +2,10 @@ +Thu Jun 7 07:35:12 UTC 2018 - guillaume.gar...@opensuse.org + +- Update to ab802d3 (2018-06-03) + +------------------------------------------------------------------- +Thu May 24 11:25:26 UTC 2018 - fv...@suse.com + +- Allow u-boot to set arm_control to support 32-bit images on RPi3 + +------------------------------------------------------------------- Old: ---- raspberrypi-firmware-2018.04.16.tar.bz2 New: ---- raspberrypi-firmware-2018.06.03.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ raspberrypi-firmware-config.spec ++++++ --- /var/tmp/diff_new_pack.txFT0A/_old 2018-06-08 23:17:55.866720737 +0200 +++ /var/tmp/diff_new_pack.txFT0A/_new 2018-06-08 23:17:55.870720592 +0200 @@ -17,7 +17,7 @@ Name: raspberrypi-firmware-config -Version: 2018.04.16 +Version: 2018.06.03 Release: 0 Summary: Configuration for the Raspberry Pi firmware loader License: MIT ++++++ raspberrypi-firmware.spec ++++++ --- /var/tmp/diff_new_pack.txFT0A/_old 2018-06-08 23:17:55.894719726 +0200 +++ /var/tmp/diff_new_pack.txFT0A/_new 2018-06-08 23:17:55.898719581 +0200 @@ -17,7 +17,7 @@ Name: raspberrypi-firmware -Version: 2018.04.16 +Version: 2018.06.03 Release: 0 Summary: Binary bootloader and firmware files for Raspberry Pi License: SUSE-Firmware ++++++ config.txt ++++++ --- /var/tmp/diff_new_pack.txFT0A/_old 2018-06-08 23:17:55.938718136 +0200 +++ /var/tmp/diff_new_pack.txFT0A/_new 2018-06-08 23:17:55.938718136 +0200 @@ -47,9 +47,6 @@ [pi3] -# Boot in AArch64 (64-bit) mode -arm_control=0x200 - # Older kernels didn't support HDMI connection detection on the rpi3, so force # HDMI to always plugged in there. This overlay is only effective on rpi3. dtoverlay=rpi3-hdmi @@ -57,6 +54,9 @@ [all] +# Allow u-boot to set arm_control +include ubootconfig.txt + # Allow user overrides of config options include extraconfig.txt ++++++ raspberrypi-firmware-2018.04.16.tar.bz2 -> raspberrypi-firmware-2018.06.03.tar.bz2 ++++++ /work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-2018.04.16.tar.bz2 /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new/raspberrypi-firmware-2018.06.03.tar.bz2 differ: char 11, line 1