Hello community, here is the log from the commit of package DisplayCAL for openSUSE:Factory checked in at 2018-10-17 08:25:44 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/DisplayCAL (Old) and /work/SRC/openSUSE:Factory/.DisplayCAL.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "DisplayCAL" Wed Oct 17 08:25:44 2018 rev:24 rq:641152 version:3.7.0.0 Changes: -------- --- /work/SRC/openSUSE:Factory/DisplayCAL/DisplayCAL.changes 2018-08-27 12:59:25.220820843 +0200 +++ /work/SRC/openSUSE:Factory/.DisplayCAL.new/DisplayCAL.changes 2018-10-17 08:26:02.458635224 +0200 @@ -1,0 +2,107 @@ +Wed Oct 10 22:11:06 UTC 2018 - obs-packag...@displaycal.net + +- Update to 3.7: + * [Feature] Full field pattern insertion option for selected + pattern generators (madTPG*, Prisma and Resolve). *madTPG on + Windows requires using a modified version of ArgyllCMS. + * [Feature] Chromatic adaptation control for the synthetic ICC + profile creator. + * Resolve HDR 3D LUT preset (SMPTE 2084 hard clip, no + tonemapping). + * [Enhancement] Show a column with the spectral resolution and + range of the reference measurements when listing colorimeter + corrections from the online database (if available). + * [Enhancement] Improved support for (3rd party) profiles with + chromatic adaptation transforms other than Bradford, e.g. for + use as 3D LUT source profiles. + * [Enhancement] Early abort when cancelling video level detection + measurements. + * [Enhancement] Early abort if connecting to madTPG fails. + * [Enhancement] Updated simplified chinese translation (thanks to + Mars). + * [Enhancement] If using madTPG and continuing from interactive + adjustment to iterative grayscale calibration, wait three + seconds after switching to fullscreen and exclusive fullscreen + respectively, to give the display time to complete the switch, + before commencing measurements. + * [Enhancement] Show messages from instrument related popup + dialogs during measurements on the madTPG on-screen display as + well. + * Hue preservation less than 100% for HDR SMPTE 2084 3D LUTs with + roll-off tonemapping now only affects red-orange/orange/amber + hues (i.e. match madVR's “color tweaks for fire & explosions”). + * [Enhancement] Verification: Before attempting to create a + measurement report, automatically check the PCS to device table + resolution for LUT profiles if necessary and warn about low + resolution tables. + * [Enhancement] 3D LUT verification: When using a different + whitepoint target for a 3D LUT, use the altered source profile + as simulation profile for verification. + * [Enhancement] 3D LUT verification: When creating a self check + report, automatically use the device link profile. + * [Enhancement] Measurement report: Show weighted ΔL, ΔC and ΔH + for ΔE*94 and ΔE*00. + * [Enhancement] Measurement report: Signed values for ΔL*76, + ΔL*94, ΔC*76 and ΔC*94 are now always relative to the nominal + values (match ΔE*00 and ΔICtCp). + * [Enhancement] Measurement report: Measured vs display profile + whitepoint is now a purely informational statistic, no longer a + pass criteria. + * [UI] When creating a colorimeter correction, allow selecting a + display manufacturer via autocomplete if not set. + * [UI] [Cosmetic] Minor UI spacing adjustments. + * [Cosmetic] For HDR 3D LUTs with SMPTE 2084 (hard clip) tone + curve, set the mastering display peak luminance in the + simulation profile description to the target peak. + * [Minor] Interpolation between clipping and roll-off for HDR 3D + LUTs with SMPTE 2084 tone curve was not as smooth as intended + with mastering display peak luminance below 10000 cd/m² or just + above target peak. + * [Minor] HDR 3D LUTs with SMPTE 2084 (hard clip) tone curve did + reproduce slightly too low luminance in a limited region below + the chosen target peak. + * [Minor] Verification controls were not being initialized if + loading settings before switching to the verification tab. + * [Trivial] Also update verification tone curve controls if a + matrix profile with non-identical shaper curves is selected as + simulation profile. + * [Trivial] Make eeColor to madVR converter exit cleanly when + receiving SIGBREAK. + * [Trivial] Correctly escape/unescape quotes in CGATS. + * [Trivial] Reset enumerated measurement modes when changing + Argyll version. + * [Trivial] Do not automatically disable interactive display + adjustment after visual whitepoint editor measurement. + * [Trivial] When using madTPG, restore fullscreen and OSD button + states when continuing on to calibration after interactive + adjustment. + * [Trivial] madTPG did not automatically enter fullscreen if + enabled when skipping interactive display adjustment and + detecting video levels. + * [Trivial] Only show the place instrument on screen countdown in + madTPG if we don't temporarily leave fullscreen for interactive + adjustment during calibration anyway. + * [Trivial] Always force HDR 3D LUT SMPTE 2084 mastering display + peak luminance to be greater than or equal to target peak + luminance. + * [Cosmetic] Do not show HDR 3D LUT tone mapping hue/saturation + controls for SMPTE 2084 (hard clip). + * [Minor] Measurement report: Measured vs assumed/profile + whitepoint delta ICtCp should always be referenced to + assumed/profile whitepoint. + * [Minor] Measurement report: Using absolute values without + display profile whitepoint as reference in ICtCp mode + referenced the values to D50 instead of the natural ICtCp + whitepoint of D65. + * [Cosmetic] Measurement report: RGB color comparison swatches + when using absolute values and display profile whitepoint as + reference were not referenced to chosen whitepoint. + * [Trivial] Profile information: Whitepoint delta E to locus + should always be referenced to locus, not D50. + * [Cosmetic] Profile information: Use correct axis labels for + DIN99b 2D gamut plot. + * [Minor] Standalone 3D LUT maker: Unmatched Thaw() call when + setting abstract profile. + * [Minor]: Prevent potential subprocess memory leak. + +------------------------------------------------------------------- Old: ---- DisplayCAL-3.6.2.0.tar.gz New: ---- DisplayCAL-3.7.0.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ DisplayCAL.spec ++++++ --- /var/tmp/diff_new_pack.9w8RMi/_old 2018-10-17 08:26:04.290633766 +0200 +++ /var/tmp/diff_new_pack.9w8RMi/_new 2018-10-17 08:26:04.294633763 +0200 @@ -28,7 +28,7 @@ License: GPL-3.0+ Group: Productivity/Graphics/Other Name: DisplayCAL -Version: 3.6.2.0 +Version: 3.7.0.0 Release: 0 Source0: http://displaycal.net/download/%{name}-%version.tar.gz Url: https://displaycal.net/ ++++++ DisplayCAL-3.6.2.0.tar.gz -> DisplayCAL-3.7.0.0.tar.gz ++++++ /work/SRC/openSUSE:Factory/DisplayCAL/DisplayCAL-3.6.2.0.tar.gz /work/SRC/openSUSE:Factory/.DisplayCAL.new/DisplayCAL-3.7.0.0.tar.gz differ: char 5, line 1