Hello community,
here is the log from the commit of package skelcd-control-Kubic for
openSUSE:Factory checked in at 2020-05-15 23:49:25
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/skelcd-control-Kubic (Old)
and /work/SRC/openSUSE:Factory/.skelcd-control-Kubic.new.2738 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "skelcd-control-Kubic"
Fri May 15 23:49:25 2020 rev:36 rq:802644 version:20200511
Changes:
--------
---
/work/SRC/openSUSE:Factory/skelcd-control-Kubic/skelcd-control-Kubic.changes
2019-10-03 14:07:11.336450742 +0200
+++
/work/SRC/openSUSE:Factory/.skelcd-control-Kubic.new.2738/skelcd-control-Kubic.changes
2020-05-15 23:49:27.745214137 +0200
@@ -1,0 +2,6 @@
+Mon May 11 07:39:25 UTC 2020 - Steffen Winterfeldt <snw...@suse.com>
+
+- remove obsolete proposal_settings_editable (bsc#1171423)
+- 20200511
+
+-------------------------------------------------------------------
Old:
----
skelcd-control-Kubic-20191002.tar.bz2
New:
----
skelcd-control-Kubic-20200511.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ skelcd-control-Kubic.spec ++++++
--- /var/tmp/diff_new_pack.eeLyHD/_old 2020-05-15 23:49:28.825216218 +0200
+++ /var/tmp/diff_new_pack.eeLyHD/_new 2020-05-15 23:49:28.829216225 +0200
@@ -1,7 +1,7 @@
#
# spec file for package skelcd-control-Kubic
#
-# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
+# Copyright (c) 2020 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -121,7 +121,7 @@
Url: https://github.com/yast/skelcd-control-Kubic
AutoReqProv: off
-Version: 20191002
+Version: 20200511
Release: 0
Summary: The Kubic control file needed for installation
License: MIT
++++++ skelcd-control-Kubic-20191002.tar.bz2 ->
skelcd-control-Kubic-20200511.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/skelcd-control-Kubic-20191002/CONTRIBUTING.md
new/skelcd-control-Kubic-20200511/CONTRIBUTING.md
--- old/skelcd-control-Kubic-20191002/CONTRIBUTING.md 2019-10-02
14:37:40.000000000 +0200
+++ new/skelcd-control-Kubic-20200511/CONTRIBUTING.md 1970-01-01
01:00:00.000000000 +0100
@@ -1,89 +0,0 @@
-YaST Contribution Guidelines
-============================
-
-YaST is an open source project and as such it welcomes all kinds of
-contributions. If you decide to contribute, please follow these guidelines to
-ensure the process is effective and pleasant both for you and the YaST
maintainers.
-
-There are two main forms of contribution: reporting bugs and performing code
-changes.
-
-Bug Reports
------------
-
-If you find a problem, please report it either using
-[Bugzilla](https://bugzilla.suse.com/enter_bug.cgi?format=guided&product=openSUSE+Factory&component=YaST2)
-or [GitHub issues](../../issues). (For Bugzilla, use the [simplified
-registration](https://secure-www.novell.com/selfreg/jsp/createSimpleAccount.jsp)
-if you don't have an account yet.)
-
-When creating a bug report, please follow our [bug reporting
-guidelines](http://en.opensuse.org/openSUSE:Report_a_YaST_bug).
-
-We can't guarantee that every bug will be fixed, but we'll try.
-
-Code Changes
-------------
-
-We welcome all kinds of code contributions, from simple bug fixes to
significant
-refactorings and implementation of new features. However, before making any
-non-trivial contribution, get in touch with us first — this can prevent wasted
-effort on both sides. Also, have a look at our [development
-documentation](http://en.opensuse.org/openSUSE:YaST_development).
-
-To send us your code change, use GitHub pull requests. The workflow is as
-follows:
-
- 1. Fork the project.
-
- 2. Create a topic branch based on `master`.
-
- 3. Implement your change, including tests (if possible). Make sure you adhere
- to the [Ruby style
- guide](https://github.com/SUSE/style-guides/blob/master/Ruby.md).
-
- 4. Update the package version (in `packages/*.spec`, usually by
- `rake version:bump`) and add a new entry to the `package/*.changes` file
- (by `osc vc package`).
- For bigger changes or changes which need longer discussion it is advised
to
- add this as a separate last commit so it can be easily updated when
another
- change is merged in the meantime.
-
- 5. Make sure your change didn't break anything by building the RPM package
- (`rake osc:build`). The build process includes running the full testsuite.
-
- 6. Publish the branch and create a pull request.
-
- 7. YaST developers will review your change and possibly point out issues.
- Adapt the code under their guidance until they are all resolved.
-
- 8. Finally, the pull request will get merged or rejected.
-
-See also [GitHub's guide on
-contributing](https://help.github.com/articles/fork-a-repo).
-
-If you want to do multiple unrelated changes, use separate branches and pull
-requests.
-
-### Commits
-
-Each commit in the pull request should do only one thing, which is clearly
-described by its commit message. Especially avoid mixing formatting changes and
-functional changes into one commit. When writing commit messages, adhere to
-[widely used
-conventions](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
-
-If your commit is related to a bug in Bugzilla or an issue on GitHub, make sure
-you mention it in the commit message for cross-reference. Use format like
-bnc#775814 or gh#yast/yast-foo#42. See also [GitHub
-autolinking](https://help.github.com/articles/github-flavored-markdown#references)
-and [openSUSE abbreviation
-reference](http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines#Current_set_of_abbreviations).
-
-Additional Information
-----------------------
-
-If you have any question, feel free to ask at the [development mailing
-list](http://lists.opensuse.org/yast-devel/) or at the
-[#yast](http://webchat.freenode.net/?channels=%23yast) IRC channel on freenode.
-We'll do our best to provide a timely and accurate answer.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/skelcd-control-Kubic-20191002/control/control.Kubic.xml
new/skelcd-control-Kubic-20200511/control/control.Kubic.xml
--- old/skelcd-control-Kubic-20191002/control/control.Kubic.xml 2019-10-02
14:37:40.000000000 +0200
+++ new/skelcd-control-Kubic-20200511/control/control.Kubic.xml 2020-05-11
11:48:34.000000000 +0200
@@ -108,7 +108,6 @@
<proposal>
<lvm config:type="boolean">false</lvm>
- <proposal_settings_editable
config:type="boolean">true</proposal_settings_editable>
<windows_delete_mode
config:type="symbol">all</windows_delete_mode>
<linux_delete_mode config:type="symbol">all</linux_delete_mode>
<other_delete_mode config:type="symbol">all</other_delete_mode>
@@ -266,7 +265,6 @@
<proposal>
<lvm config:type="boolean">false</lvm>
- <proposal_settings_editable
config:type="boolean">true</proposal_settings_editable>
<windows_delete_mode
config:type="symbol">all</windows_delete_mode>
<linux_delete_mode config:type="symbol">all</linux_delete_mode>
<other_delete_mode config:type="symbol">all</other_delete_mode>
@@ -398,7 +396,6 @@
<proposal>
<lvm config:type="boolean">false</lvm>
- <proposal_settings_editable
config:type="boolean">true</proposal_settings_editable>
<windows_delete_mode
config:type="symbol">all</windows_delete_mode>
<linux_delete_mode config:type="symbol">all</linux_delete_mode>
<other_delete_mode config:type="symbol">all</other_delete_mode>
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/skelcd-control-Kubic-20191002/package/skelcd-control-Kubic.changes
new/skelcd-control-Kubic-20200511/package/skelcd-control-Kubic.changes
--- old/skelcd-control-Kubic-20191002/package/skelcd-control-Kubic.changes
2019-10-02 14:37:40.000000000 +0200
+++ new/skelcd-control-Kubic-20200511/package/skelcd-control-Kubic.changes
2020-05-11 11:48:34.000000000 +0200
@@ -1,4 +1,10 @@
-------------------------------------------------------------------
+Mon May 11 07:39:25 UTC 2020 - Steffen Winterfeldt <snw...@suse.com>
+
+- remove obsolete proposal_settings_editable (bsc#1171423)
+- 20200511
+
+-------------------------------------------------------------------
Wed Oct 2 11:17:26 UTC 2019 - Josef Reidinger <jreidin...@suse.com>
- Add requirement for precise time (bsc#1145193)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/skelcd-control-Kubic-20191002/package/skelcd-control-Kubic.spec
new/skelcd-control-Kubic-20200511/package/skelcd-control-Kubic.spec
--- old/skelcd-control-Kubic-20191002/package/skelcd-control-Kubic.spec
2019-10-02 14:37:40.000000000 +0200
+++ new/skelcd-control-Kubic-20200511/package/skelcd-control-Kubic.spec
2020-05-11 11:48:34.000000000 +0200
@@ -121,7 +121,7 @@
Url: https://github.com/yast/skelcd-control-Kubic
AutoReqProv: off
-Version: 20191002
+Version: 20200511
Release: 0
Summary: The Kubic control file needed for installation
License: MIT
