Hello community, here is the log from the commit of package xorg-x11-fonts for openSUSE:Factory checked in at 2020-08-28 21:17:21 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xorg-x11-fonts (Old) and /work/SRC/openSUSE:Factory/.xorg-x11-fonts.new.3399 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xorg-x11-fonts" Fri Aug 28 21:17:21 2020 rev:54 rq:828817 version:7.6 Changes: -------- --- /work/SRC/openSUSE:Factory/xorg-x11-fonts/xorg-x11-fonts.changes 2020-07-03 00:00:07.233624689 +0200 +++ /work/SRC/openSUSE:Factory/.xorg-x11-fonts.new.3399/xorg-x11-fonts.changes 2020-08-28 21:19:47.912278691 +0200 @@ -1,0 +2,7 @@ +Sun Aug 23 18:16:59 UTC 2020 - Stefan Dirsch <sndir...@suse.com> + +- font-alias 1.0.4 and font-misc-ethiopic 1.0.4 + * These minor maintenance releases roll up the past decade's + worth of fixes & cleanups. + +------------------------------------------------------------------- Old: ---- font-alias-1.0.3.tar.bz2 font-misc-ethiopic-1.0.3.tar.bz2 New: ---- font-alias-1.0.4.tar.bz2 font-misc-ethiopic-1.0.4.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xorg-x11-fonts.spec ++++++ --- /var/tmp/diff_new_pack.IEaqaR/_old 2020-08-28 21:19:49.740279578 +0200 +++ /var/tmp/diff_new_pack.IEaqaR/_new 2020-08-28 21:19:49.744279580 +0200 @@ -54,7 +54,7 @@ Source19: http://xorg.freedesktop.org/archive/individual/font/font-jis-misc-1.0.3.tar.bz2 Source20: http://xorg.freedesktop.org/archive/individual/font/font-micro-misc-1.0.3.tar.bz2 Source21: http://xorg.freedesktop.org/archive/individual/font/font-misc-cyrillic-1.0.3.tar.bz2 -Source22: http://xorg.freedesktop.org/archive/individual/font/font-misc-ethiopic-1.0.3.tar.bz2 +Source22: http://xorg.freedesktop.org/archive/individual/font/font-misc-ethiopic-1.0.4.tar.bz2 Source23: http://xorg.freedesktop.org/archive/individual/font/font-misc-meltho-1.0.3.tar.bz2 Source24: http://xorg.freedesktop.org/archive/individual/font/font-misc-misc-1.1.2.tar.bz2 Source25: http://xorg.freedesktop.org/archive/individual/font/font-mutt-misc-1.0.3.tar.bz2 @@ -68,7 +68,7 @@ Source33: http://xorg.freedesktop.org/archive/individual/font/font-adobe-utopia-100dpi-1.0.4.tar.bz2 Source34: http://xorg.freedesktop.org/archive/individual/font/font-adobe-utopia-75dpi-1.0.4.tar.bz2 Source35: http://xorg.freedesktop.org/archive/individual/font/font-adobe-utopia-type1-1.0.4.tar.bz2 -Source36: http://xorg.freedesktop.org/archive/individual/font/font-alias-1.0.3.tar.bz2 +Source36: http://xorg.freedesktop.org/archive/individual/font/font-alias-1.0.4.tar.bz2 Source100: README.converted %if "%{flavor}" == "converted" Source1000: https://pwu.fedorapeople.org/fonts/convertbitmap/convertfont.py ++++++ font-alias-1.0.3.tar.bz2 -> font-alias-1.0.4.tar.bz2 ++++++ ++++ 17004 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/ChangeLog new/font-alias-1.0.4/ChangeLog --- old/font-alias-1.0.3/ChangeLog 2010-10-05 08:15:14.000000000 +0200 +++ new/font-alias-1.0.4/ChangeLog 2020-08-06 23:21:07.000000000 +0200 @@ -1,3 +1,116 @@ +commit 55ad2d3f0abcfc5e2ee2198e7615d2a372ed44ca +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Thu Aug 6 14:04:03 2020 -0700 + + font-alias 1.0.4 + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit eda62eb3528808cfd6acc97372959136ec276801 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Fri Dec 7 19:25:57 2018 -0800 + + Update configure.ac bug URL for gitlab migration + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 727b2422a81b08889d7107298852c801b9cadc5a +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sun Nov 18 17:34:56 2018 -0800 + + Update README for gitlab migration + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit de34ddc03112256b4c0608d5f387419de0d723f3 +Author: Mihail Konev <k....@ya.ru> +Date: Thu Jan 26 14:00:22 2017 +1000 + + autogen: add default patch prefix + + Signed-off-by: Mihail Konev <k....@ya.ru> + +commit 883e29ef4942f374ee91757e78d70c57617a8e7f +Author: Emil Velikov <emil.l.veli...@gmail.com> +Date: Mon Mar 9 12:00:52 2015 +0000 + + autogen.sh: use quoted string variables + + Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent + fall-outs, when they contain space. + + Signed-off-by: Emil Velikov <emil.l.veli...@gmail.com> + Reviewed-by: Peter Hutterer <peter.hutte...@who-t.net> + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + +commit 45d892282fc05f8a1ed254c4fa7bf3723f4c9549 +Author: Peter Hutterer <peter.hutte...@who-t.net> +Date: Tue Jan 24 10:32:07 2017 +1000 + + autogen.sh: use exec instead of waiting for configure to finish + + Syncs the invocation of configure with the one from the server. + + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + Reviewed-by: Emil Velikov <emil.veli...@collabora.com> + +commit 50f4974b6092f158cbce7450a6b1c7f573725038 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat May 31 21:39:32 2014 -0700 + + autogen.sh: Honor NOCONFIGURE=1 + + See http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit a6f93e35ec46a08490413e31e3beca3fa06bd815 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat May 31 21:38:41 2014 -0700 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 4f63896a7793bda7c57f51c64b6628fdeae4f21b +Author: Gaetan Nadon <mems...@videotron.ca> +Date: Mon Oct 28 08:08:54 2013 -0400 + + config: replace deprecated use of AC_OUTPUT with AC_CONFIG_FILES + + Fix Automake warning: AC_OUTPUT should be used without arguments. + www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Files + + Signed-off-by: Gaetan Nadon <mems...@videotron.ca> + +commit 347a616283b8e96120e8d8a95558c6204b8eecd2 +Author: Gaetan Nadon <mems...@videotron.ca> +Date: Fri Oct 15 20:17:20 2010 -0400 + + config: Use the shorthand --disable-all-encodings option in font-util v1.2 + + This option is useful to disable all possible font encodings at once, + without fine-graining the calling ebuilds for a list of encodings + supported by each font package. + + The option is parsed before all other encoding options, so it basically + sets defaults for all of them. Afterwards, any encoding can be + re-enabled back using '--enable-<encoding>' (much like + '--disable-all-encodings --enable-iso8859-2'). + + Reviewed-by: Rémi Cardona <r...@gentoo.org> + + Signed-off-by: Gaetan Nadon <mems...@videotron.ca> + +commit 725970d993e44a2760b91bfdee7d6c2af61bffd2 +Author: Jesse Adkins <jesserayadk...@gmail.com> +Date: Tue Sep 28 13:29:57 2010 -0700 + + Purge cvs tags. + + Signed-off-by: Jesse Adkins <jesserayadk...@gmail.com> + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + commit 06cff15ace5ef49bfe4ebbb02d715cbe9cedd30b Author: Alan Coopersmith <alan.coopersm...@oracle.com> Date: Mon Oct 4 23:14:45 2010 -0700 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/INSTALL new/font-alias-1.0.4/INSTALL --- old/font-alias-1.0.3/INSTALL 2010-10-05 08:15:14.000000000 +0200 +++ new/font-alias-1.0.4/INSTALL 2020-08-06 23:21:07.000000000 +0200 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/Makefile.am new/font-alias-1.0.4/Makefile.am --- old/font-alias-1.0.3/Makefile.am 2009-11-30 08:11:35.000000000 +0100 +++ new/font-alias-1.0.4/Makefile.am 2020-08-06 23:20:57.000000000 +0200 @@ -32,3 +32,5 @@ $(CHANGELOG_CMD) dist-hook: ChangeLog INSTALL + +EXTRA_DIST = README.md diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/README new/font-alias-1.0.4/README --- old/font-alias-1.0.3/README 2009-10-16 23:45:39.000000000 +0200 +++ new/font-alias-1.0.4/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,24 +0,0 @@ - -All questions regarding this software should be directed at the -Xorg mailing list: - - http://lists.freedesktop.org/mailman/listinfo/xorg - -Please submit bug reports to the Xorg bugzilla: - - https://bugs.freedesktop.org/enter_bug.cgi?product=xorg - -The master development code repository can be found at: - - git://anongit.freedesktop.org/git/xorg/font/alias - - http://cgit.freedesktop.org/xorg/font/alias - -For patch submission instructions, see: - - http://www.x.org/wiki/Development/Documentation/SubmittingPatches - -For more information on the git code manager, see: - - http://wiki.x.org/wiki/GitPage - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/README.md new/font-alias-1.0.4/README.md --- old/font-alias-1.0.3/README.md 1970-01-01 01:00:00.000000000 +0100 +++ new/font-alias-1.0.4/README.md 2020-08-06 23:20:57.000000000 +0200 @@ -0,0 +1,16 @@ + +All questions regarding this software should be directed at the +Xorg mailing list: + + https://lists.x.org/mailman/listinfo/xorg + +The master development code repository can be found at: + + https://gitlab.freedesktop.org/xorg/font/alias + +Please submit bug reports and requests to merge patches there. + +For patch submission instructions, see: + + https://www.x.org/wiki/Development/Documentation/SubmittingPatches + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/compile new/font-alias-1.0.4/compile --- old/font-alias-1.0.3/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/font-alias-1.0.4/compile 2020-08-06 23:21:02.000000000 +0200 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey <tro...@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-autom...@gnu.org> or send patches to +# <automake-patc...@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-autom...@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/configure.ac new/font-alias-1.0.4/configure.ac --- old/font-alias-1.0.3/configure.ac 2010-10-05 08:14:34.000000000 +0200 +++ new/font-alias-1.0.4/configure.ac 2020-08-06 23:20:57.000000000 +0200 @@ -22,11 +22,10 @@ dnl Process this file with autoconf to create configure. AC_PREREQ([2.57]) -AC_INIT([font-alias], [1.0.3], - [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], +AC_INIT([font-alias], [1.0.4], + [https://gitlab.freedesktop.org/xorg/font/alias/issues], [font-alias]) AM_INIT_AUTOMAKE([foreign dist-bzip2]) -AM_MAINTAINER_MODE # Require xorg-macros: XORG_DEFAULT_OPTIONS m4_ifndef([XORG_MACROS_VERSION], @@ -36,6 +35,11 @@ AC_PROG_INSTALL +# Require X.Org's font util macros 1.2 or later +m4_ifndef([XORG_FONT_MACROS_VERSION], + [m4_fatal([must install X.Org font-util 1.2 or later before running autoconf/autogen])]) +XORG_FONT_MACROS_VERSION(1.2) + XORG_FONTROOTDIR AC_ARG_WITH(top-fontdir, AC_HELP_STRING([--with-top-fontdir=<pathname>], @@ -43,8 +47,9 @@ [AC_MSG_ERROR([--with-top-fontdir is obsolete, use --with-fontrootdir instead])]) -AC_OUTPUT([Makefile +AC_CONFIG_FILES([Makefile 100dpi/Makefile 75dpi/Makefile cyrillic/Makefile misc/Makefile]) +AC_OUTPUT diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/cyrillic/fonts.alias new/font-alias-1.0.4/cyrillic/fonts.alias --- old/font-alias-1.0.3/cyrillic/fonts.alias 2009-10-16 23:45:39.000000000 +0200 +++ new/font-alias-1.0.4/cyrillic/fonts.alias 2020-08-06 23:20:57.000000000 +0200 @@ -7,8 +7,6 @@ ! responsible for the proper functioning of this software, nor does ! the author assume any responsibility for damages incurred with its use. ! -! $XFree86$ -! fixed -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-koi8-r variable -*-helvetica-bold-r-normal-*-*-120-*-*-*-*-koi8-r 5x8 -misc-fixed-medium-r-normal--8-80-75-75-c-50-koi8-r diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/misc/fonts.alias new/font-alias-1.0.4/misc/fonts.alias --- old/font-alias-1.0.3/misc/fonts.alias 2009-10-16 23:45:39.000000000 +0200 +++ new/font-alias-1.0.4/misc/fonts.alias 2020-08-06 23:20:57.000000000 +0200 @@ -1,4 +1,3 @@ -! $Xorg: fonts.alias,v 1.3 2000/08/21 16:42:31 coskrey Exp $ fixed -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1 variable -*-helvetica-bold-r-normal-*-*-120-*-*-*-*-iso8859-1 5x7 -misc-fixed-medium-r-normal--7-70-75-75-c-50-iso8859-1 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-alias-1.0.3/missing new/font-alias-1.0.4/missing --- old/font-alias-1.0.3/missing 2010-10-05 08:15:11.000000000 +0200 +++ new/font-alias-1.0.4/missing 2020-08-06 23:21:02.000000000 +0200 @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2009-04-28.21; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,69 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-autom...@gnu.org>." exit $? @@ -100,272 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) ++++++ font-misc-ethiopic-1.0.3.tar.bz2 -> font-misc-ethiopic-1.0.4.tar.bz2 ++++++ ++++ 16573 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/ChangeLog new/font-misc-ethiopic-1.0.4/ChangeLog --- old/font-misc-ethiopic-1.0.3/ChangeLog 2010-11-15 23:43:38.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/ChangeLog 2020-08-06 23:25:12.000000000 +0200 @@ -1,5 +1,115 @@ +commit 3bc40d4997763e61253c52fcb1d9cd1093c9479f +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Thu Aug 6 14:23:45 2020 -0700 + + font-misc-ethiopic 1.0.4 + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit a74da8becde2359a4350e057b5250d5e04f3e6e3 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Fri Dec 7 19:27:06 2018 -0800 + + Update configure.ac bug URL for gitlab migration + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 5d3d5b014994ad791330704ca469a4a25fba9d63 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sun Nov 18 18:40:44 2018 -0800 + + Update README for gitlab migration + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 8699d54a175d0e47fa4e0bbf42b4959c0ab1ebc9 +Author: Mihail Konev <k....@ya.ru> +Date: Thu Jan 26 14:00:22 2017 +1000 + + autogen: add default patch prefix + + Signed-off-by: Mihail Konev <k....@ya.ru> + +commit 19af834a60e0b690e08b6f958ec376ee14ba89cc +Author: Emil Velikov <emil.l.veli...@gmail.com> +Date: Mon Mar 9 12:00:52 2015 +0000 + + autogen.sh: use quoted string variables + + Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent + fall-outs, when they contain space. + + Signed-off-by: Emil Velikov <emil.l.veli...@gmail.com> + Reviewed-by: Peter Hutterer <peter.hutte...@who-t.net> + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + +commit 1a3ff71b48cca4aae165584c72fe65755655aebd +Author: Peter Hutterer <peter.hutte...@who-t.net> +Date: Tue Jan 24 10:32:07 2017 +1000 + + autogen.sh: use exec instead of waiting for configure to finish + + Syncs the invocation of configure with the one from the server. + + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + Reviewed-by: Emil Velikov <emil.veli...@collabora.com> + +commit 30f5c5314e33f90fa0da2cfb97f7b86cdebdf6c6 +Author: Matthieu Herrb <matth...@herrb.eu> +Date: Mon Sep 12 10:48:42 2016 +0200 + + Typo: font.dir -> fonts.dir + + Signed-off-by: Matthieu Herrb <matth...@herrb.eu> + + Reviewed-by: Alan Coopersmith <alan.coopersm...@oracle.com> + Reviewed-by: Hans de Goede <hdego...@redhat.com> + +commit 69005112f774b4aceddc0bbeb411319a249ac305 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat May 31 21:39:32 2014 -0700 + + autogen.sh: Honor NOCONFIGURE=1 + + See http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 0aa78788104883b08fedac4edf154041109bbb3b +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat May 31 21:38:41 2014 -0700 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit e1811017d61a0400351c5bcdbd195d1031945f83 +Author: Gaetan Nadon <mems...@videotron.ca> +Date: Mon Oct 28 08:08:55 2013 -0400 + + config: replace deprecated use of AC_OUTPUT with AC_CONFIG_FILES + + Fix Automake warning: AC_OUTPUT should be used without arguments. + www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Files + + Signed-off-by: Gaetan Nadon <mems...@videotron.ca> + +commit bf0b2812b020cd338cba2e235132b97021a6f9e3 +Author: Egbert Eich <e...@freedesktop.org> +Date: Thu May 19 17:50:35 2011 +0200 + + install: Make fonttypes to be installed configurable + + This package contains two font versions: TrueType and OpenType. + One may want to install only one of them and (re)generate font.scale + for this introduce two new config options: + --disable-opentype-install and --disable-truetype-install. + + Reviewed-by: Alan Coopersmith <alan.coopersm...@oracle.com> + Signed-off-by: Egbert Eich <e...@freedesktop.org> + commit dc0fe3761a074b5884bec91edde1babdf45cc95b -Author: Rémi Cardona <r...@gentoo.org> +Author: Rémi Cardona <r...@gentoo.org> Date: Mon Nov 15 23:42:52 2010 +0100 font-misc-ethiopic 1.0.3 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/INSTALL new/font-misc-ethiopic-1.0.4/INSTALL --- old/font-misc-ethiopic-1.0.3/INSTALL 2010-11-15 23:43:38.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/INSTALL 2020-08-06 23:25:12.000000000 +0200 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/Makefile.am new/font-misc-ethiopic-1.0.4/Makefile.am --- old/font-misc-ethiopic-1.0.3/Makefile.am 2010-11-15 00:37:43.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/Makefile.am 2020-08-06 23:25:02.000000000 +0200 @@ -28,19 +28,23 @@ # Used by RUN_FCCACHE fontdir = $(ttffontdir) $(otffontdir) -EXTRA_DIST = $(ttffont_DATA) $(otffont_DATA) license.txt +EXTRA_DIST = $(ttffont_DATA) $(otffont_DATA) license.txt README.md MAINTAINERCLEANFILES = ChangeLog INSTALL install-data-hook: +if INSTALL_TTF @rm -f $(DESTDIR)$(ttffontdir)/fonts.scale $(MKFONTSCALE) $(DESTDIR)$(ttffontdir) - @rm -f $(DESTDIR)$(ttffontdir)/font.dir + @rm -f $(DESTDIR)$(ttffontdir)/fonts.dir $(MKFONTDIR) $(DESTDIR)$(ttffontdir) +endif +if INSTALL_OTF @rm -f $(DESTDIR)$(otffontdir)/fonts.scale $(MKFONTSCALE) $(DESTDIR)$(otffontdir) - @rm -f $(DESTDIR)$(otffontdir)/font.dir + @rm -f $(DESTDIR)$(otffontdir)/fonts.dir $(MKFONTDIR) $(DESTDIR)$(otffontdir) +endif @RUN_FCCACHE@ distuninstallcheck: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/README new/font-misc-ethiopic-1.0.4/README --- old/font-misc-ethiopic-1.0.3/README 2010-11-15 00:37:43.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,24 +0,0 @@ - -All questions regarding this software should be directed at the -Xorg mailing list: - - http://lists.freedesktop.org/mailman/listinfo/xorg - -Please submit bug reports to the Xorg bugzilla: - - https://bugs.freedesktop.org/enter_bug.cgi?product=xorg - -The master development code repository can be found at: - - git://anongit.freedesktop.org/git/xorg/font/misc-ethiopic - - http://cgit.freedesktop.org/xorg/font/misc-ethiopic - -For patch submission instructions, see: - - http://www.x.org/wiki/Development/Documentation/SubmittingPatches - -For more information on the git code manager, see: - - http://wiki.x.org/wiki/GitPage - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/README.md new/font-misc-ethiopic-1.0.4/README.md --- old/font-misc-ethiopic-1.0.3/README.md 1970-01-01 01:00:00.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/README.md 2020-08-06 23:25:02.000000000 +0200 @@ -0,0 +1,18 @@ +Ge'ez Frontiers Foundation's Zemen class font +--------------------------------------------- + +All questions regarding this software should be directed at the +Xorg mailing list: + + https://lists.x.org/mailman/listinfo/xorg + +The master development code repository can be found at: + + https://gitlab.freedesktop.org/xorg/font/misc-ethiopic + +Please submit bug reports and requests to merge patches there. + +For patch submission instructions, see: + + https://www.x.org/wiki/Development/Documentation/SubmittingPatches + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/compile new/font-misc-ethiopic-1.0.4/compile --- old/font-misc-ethiopic-1.0.3/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/compile 2020-08-06 23:25:06.000000000 +0200 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey <tro...@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-autom...@gnu.org> or send patches to +# <automake-patc...@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-autom...@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/configure.ac new/font-misc-ethiopic-1.0.4/configure.ac --- old/font-misc-ethiopic-1.0.3/configure.ac 2010-11-15 23:42:45.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/configure.ac 2020-08-06 23:25:02.000000000 +0200 @@ -22,11 +22,10 @@ dnl Process this file with autoconf to create configure. AC_PREREQ([2.57]) -AC_INIT([font-misc-ethiopic], [1.0.3], - [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], +AC_INIT([font-misc-ethiopic], [1.0.4], + [https://gitlab.freedesktop.org/xorg/font/misc-ethiopic/issues], [font-misc-ethiopic]) AM_INIT_AUTOMAKE([foreign dist-bzip2]) -AM_MAINTAINER_MODE # Require xorg-macros: XORG_DEFAULT_OPTIONS m4_ifndef([XORG_MACROS_VERSION], @@ -34,6 +33,17 @@ XORG_MACROS_VERSION(1.3) XORG_DEFAULT_OPTIONS +AC_ARG_ENABLE(truetype-install, + AS_HELP_STRING([--disable-truetype-install], + [Disable install of truetype fonts (default: enabled)]), + [install_ttf=$enableval], [install_ttf=yes]) +AM_CONDITIONAL(INSTALL_TTF, [test "x$install_ttf" = xyes]) +AC_ARG_ENABLE(opentype-install, + AS_HELP_STRING([--disable-opentype-install], + [Disable install of opentype fonts (default: enabled)]), + [install_otf=$enableval], [install_otf=yes]) +AM_CONDITIONAL(INSTALL_OTF, [test "x$install_otf" = xyes]) + AC_PROG_INSTALL # Require X.Org's font util macros 1.2 or later @@ -45,4 +55,5 @@ XORG_FONTSUBDIR([OTFFONTDIR], [otf-fontdir], [OTF]) XORG_FONT_SCALED_UTILS -AC_OUTPUT([Makefile]) +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/font-misc-ethiopic-1.0.3/missing new/font-misc-ethiopic-1.0.4/missing --- old/font-misc-ethiopic-1.0.3/missing 2010-11-15 23:43:35.000000000 +0100 +++ new/font-misc-ethiopic-1.0.4/missing 2020-08-06 23:25:07.000000000 +0200 @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2009-04-28.21; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,69 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-autom...@gnu.org>." exit $? @@ -100,272 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp)