Hello community, here is the log from the commit of package xfce4-panel-plugin-netspeed for openSUSE:Factory checked in at 2013-09-08 11:43:53 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xfce4-panel-plugin-netspeed (Old) and /work/SRC/openSUSE:Factory/.xfce4-panel-plugin-netspeed.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xfce4-panel-plugin-netspeed" Changes: -------- --- /work/SRC/openSUSE:Factory/xfce4-panel-plugin-netspeed/xfce4-panel-plugin-netspeed.changes 2013-01-21 18:30:21.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.xfce4-panel-plugin-netspeed.new/xfce4-panel-plugin-netspeed.changes 2013-09-08 11:43:55.000000000 +0200 @@ -1,0 +2,8 @@ +Thu Sep 5 19:06:54 UTC 2013 - lazy.k...@opensuse.org + +- Update to 0.3.1. + * Fix for auto device issue. + * Remove ">= 2.24" from BuildRequires: pkgconfig(gtk+-2.0). It's + OK for gtk+-2.0 >= 2.6.0. + +------------------------------------------------------------------- Old: ---- xfce4-netspeed-plugin-0.3.tar.gz New: ---- xfce4-netspeed-plugin-0.3.1.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xfce4-panel-plugin-netspeed.spec ++++++ --- /var/tmp/diff_new_pack.ukI9QG/_old 2013-09-08 11:43:56.000000000 +0200 +++ /var/tmp/diff_new_pack.ukI9QG/_new 2013-09-08 11:43:56.000000000 +0200 @@ -17,7 +17,7 @@ Name: xfce4-panel-plugin-netspeed -Version: 0.3 +Version: 0.3.1 Release: 0 Summary: Xfce4 Netspeed Plugin License: GPL-2.0+ @@ -26,7 +26,7 @@ Source0: http://xfce4-netspeed-plugin.googlecode.com/files/xfce4-netspeed-plugin-%{version}.tar.gz BuildRequires: intltool BuildRequires: libtool -BuildRequires: pkgconfig(gtk+-2.0) >= 2.24 +BuildRequires: pkgconfig(gtk+-2.0) BuildRequires: pkgconfig(libgtop-2.0) BuildRequires: pkgconfig(libxfce4panel-1.0) BuildRequires: pkgconfig(libxfce4ui-1) ++++++ xfce4-netspeed-plugin-0.3.tar.gz -> xfce4-netspeed-plugin-0.3.1.tar.gz ++++++ ++++ 4720 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/INSTALL new/xfce4-netspeed-plugin/INSTALL --- old/xfce4-netspeed-plugin/INSTALL 2012-12-18 08:48:52.000000000 +0100 +++ new/xfce4-netspeed-plugin/INSTALL 2013-09-04 09:08:58.000000000 +0200 @@ -1,7 +1,7 @@ Installation Instructions ************************* -Copyright (C) 1994-1996, 1999-2002, 2004-2012 Free Software Foundation, +Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/compile new/xfce4-netspeed-plugin/compile --- old/xfce4-netspeed-plugin/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/xfce4-netspeed-plugin/compile 2013-09-04 09:08:58.000000000 +0200 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Written by Tom Tromey <tro...@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-autom...@gnu.org> or send patches to +# <automake-patc...@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-autom...@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/missing new/xfce4-netspeed-plugin/missing --- old/xfce4-netspeed-plugin/missing 2012-12-18 08:48:52.000000000 +0100 +++ new/xfce4-netspeed-plugin/missing 2013-09-04 09:08:58.000000000 +0200 @@ -1,10 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-01-06.18; # UTC +scriptversion=2012-06-26.16; # UTC -# Copyright (C) 1996-2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -29,61 +29,33 @@ exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, 'missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file 'aclocal.m4' - autoconf touch file 'configure' - autoheader touch file 'config.h.in' - autom4te touch the output file, or create a stub one - automake touch all 'Makefile.in' files - bison create 'y.tab.[ch]', if possible, from existing .[ch] - flex create 'lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create 'lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create 'y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. @@ -98,228 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown '$1' option" + echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running '$TOOL --version' or '$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'acinclude.m4' or '${configure_ac}'. You might want - to install the Automake and Perl packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified '${configure_ac}'. You might want to install the - Autoconf and GNU m4 packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'acconfig.h' or '${configure_ac}'. You might want - to install the Autoconf and GNU m4 packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - automake*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'. - You might want to install the Automake and Perl packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: '$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get '$1' as part of Autoconf from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: '$1' $msg. You should only need it if - you modified a '.y' file. You may need the Bison package - in order for those modifications to take effect. You can get - Bison from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a '.l' file. You may need the Flex package - in order for those modifications to take effect. You can get - Flex from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - Help2man package in order for those modifications to take - effect. You can get Help2man from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a '.texi' or '.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy 'make' (AIX, - DU, IRIX). You might want to install the Texinfo package or - the GNU make package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: '$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the 'README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing '$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'automa4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/panel-plugin/configure.c new/xfce4-netspeed-plugin/panel-plugin/configure.c --- old/xfce4-netspeed-plugin/panel-plugin/configure.c 2012-12-18 08:44:09.000000000 +0100 +++ new/xfce4-netspeed-plugin/panel-plugin/configure.c 2013-09-04 09:08:46.000000000 +0200 @@ -56,10 +56,12 @@ } if (gtk_toggle_button_get_active(GTK_TOGGLE_BUTTON(net_speed_configure->auto_device_check_button))) { gtk_widget_set_sensitive(net_speed_configure->device_combo, FALSE); + net_speed_plugin->options->device_auto = TRUE; net_speed_plugin->options->device = NULL; } else { gtk_widget_set_sensitive(net_speed_configure->device_combo, TRUE); + net_speed_plugin->options->device_auto = FALSE; net_speed_plugin->options->device = gtk_combo_box_get_active_text(GTK_COMBO_BOX(net_speed_configure->device_combo)); } @@ -126,7 +128,7 @@ net_speed_configure->auto_device_check_button = button = gtk_check_button_new_with_mnemonic(_("Automatically Choose Network Device")); gtk_box_pack_start(GTK_BOX(hbox), button, FALSE, FALSE, 0); - gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(button), net_speed_plugin->options->device == NULL); + gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(button), net_speed_plugin->options->device_auto == TRUE); g_signal_connect(G_OBJECT(button), "toggled", G_CALLBACK(net_speed_configure_changed), net_speed_configure); /* device */ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/panel-plugin/options.c new/xfce4-netspeed-plugin/panel-plugin/options.c --- old/xfce4-netspeed-plugin/panel-plugin/options.c 2012-12-18 08:44:09.000000000 +0100 +++ new/xfce4-netspeed-plugin/panel-plugin/options.c 2013-09-04 09:08:46.000000000 +0200 @@ -53,6 +53,7 @@ options->show_icon = xfce_rc_read_bool_entry(rc, "show_icon", TRUE); options->show_bits = xfce_rc_read_bool_entry(rc, "show_bits", FALSE); options->show_sum = xfce_rc_read_bool_entry(rc, "show_sum", FALSE); + options->device_auto = xfce_rc_read_bool_entry(rc, "device_auto", TRUE); options->device = (gchar *) xfce_rc_read_entry(rc, "device", NULL); options->device = g_strdup(options->device); options->fixed_width = xfce_rc_read_int_entry(rc, "fixed_width", 0); @@ -74,6 +75,7 @@ xfce_rc_write_bool_entry(rc, "show_icon", options->show_icon); xfce_rc_write_bool_entry(rc, "show_bits", options->show_bits); xfce_rc_write_bool_entry(rc, "show_sum", options->show_sum); + xfce_rc_write_bool_entry(rc, "device_auto", options->device_auto); xfce_rc_write_entry(rc, "device", options->device ? options->device : ""); xfce_rc_write_int_entry(rc, "fixed_width", options->fixed_width); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/panel-plugin/options.h new/xfce4-netspeed-plugin/panel-plugin/options.h --- old/xfce4-netspeed-plugin/panel-plugin/options.h 2012-12-18 08:44:09.000000000 +0100 +++ new/xfce4-netspeed-plugin/panel-plugin/options.h 2013-09-04 09:08:46.000000000 +0200 @@ -30,6 +30,7 @@ guint refresh_interval; gchar *device; + gboolean device_auto; /* 'Automatically Choose Network Device' */ gboolean show_frame; gboolean show_icon; gboolean show_bits; /* instead of bytes */ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfce4-netspeed-plugin/panel-plugin/xfce4_netspeed_plugin.c new/xfce4-netspeed-plugin/panel-plugin/xfce4_netspeed_plugin.c --- old/xfce4-netspeed-plugin/panel-plugin/xfce4_netspeed_plugin.c 2012-12-18 08:44:09.000000000 +0100 +++ new/xfce4-netspeed-plugin/panel-plugin/xfce4_netspeed_plugin.c 2013-09-04 09:08:46.000000000 +0200 @@ -203,7 +203,7 @@ /* if the is automatically chosen, * we need to iterate through the device list * with each plugin update, and find the most "active" one */ - if (net_speed_plugin->options->device == NULL) { + if (net_speed_plugin->options->device_auto == TRUE) { if (net_speed_plugin->device_info) { device_info_free(net_speed_plugin->device_info); net_speed_plugin->device_info = NULL; -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org