Am Freitag, 17. November 2006 12:01 schrieb Robby (M9.): > So i did, edited and added: Load "dri" to the top of the > module list. Result: no xserver: out of range. > (sax2 is handy in these situations.. ;)
I've allways added it on the bottom of the list. > While trying to edit and repair the damage in safe mode, (how to save > > changes and exit here?),previous to the sax-'save', i saw: Just boot in runlevel3, > > Section "DRI" > > Group "video" > > Mode 0660 > > EndSection > > near the bottom of the file... > > Does that mean that the driver is working by default, so adding "dri" > to load is not nessesary, or desirable, and causes to prevent the > xserver from starting? No, it's only to set the rights, when it's enabled. > Or do i have another option to enable the 3D support for the card? > I attached a sample of the config file... You have to load the dri modul, otherwise it can't work. I've attached my version (at the moment SUSE 10.1 with xorg 7.2 from the buildserver, 3D works, AIGLX not realy, the same problem as in http://bugs.beryl-project.org/ticket/469, but XGL doesn't work, too) -- Machs gut | http://www.iivs.de/schwinde/buerger/tremmel/ | http://packman.links2linux.de/ Manfred | http://www.knightsoft-net.de
# /.../ # SaX generated X11 config file # Created on: 2006-10-28T21:46:09+0200. # # Version: 8.1 # Contact: Marcus Schaefer <[EMAIL PROTECTED]>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/latin2/misc:unscaled" FontPath "/usr/share/fonts/latin2/75dpi:unscaled" FontPath "/usr/share/fonts/latin2/100dpi:unscaled" FontPath "/usr/share/fonts/latin2/Type1" FontPath "/usr/share/fonts/latin7/75dpi:unscaled" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/kwintv" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/ucs/misc:unscaled" FontPath "/usr/share/fonts/ucs/75dpi:unscaled" FontPath "/usr/share/fonts/ucs/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/misc:unscaled" FontPath "/usr/share/fonts/hellas/75dpi:unscaled" FontPath "/usr/share/fonts/hellas/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/Type1" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/usr/share/fonts/xtest" FontPath "/opt/kde3/share/fonts" FontPath "unix/:7100" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" EndSection Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "dri" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "de" Option "XkbModel" "pc105" Option "XkbRules" "xfree86" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "Logitech Optical USB Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Driver "synaptics" Identifier "Mouse[3]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "on" Option "InputFashion" "Mouse" Option "Name" "Synaptics;Touchpad" Option "Protocol" "explorerps/2" Option "SHMConfig" "on" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 305 229 HorizSync 30-90 Identifier "Monitor[0]" ModelName "[EMAIL PROTECTED]" Option "DPMS" VendorName "--> LCD" VertRefresh 30-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 Modeline "1400x1050" 118.42 1400 1488 1640 1880 1050 1051 1054 1086 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1400x1050" EndSubSection SubSection "Display" Depth 16 Modes "1400x1050" EndSubSection SubSection "Display" Depth 24 Modes "1400x1050" EndSubSection SubSection "Display" Depth 8 Modes "1400x1050" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "RV350 NP" BusID "PCI:[EMAIL PROTECTED]:0:0" Driver "radeon" Identifier "Device[0]" Option "CRT2HSync" "31-48" Option "CRT2Position" "Clone" Option "SaXDualMonitorVendor" "--> VESA" Option "SaXDualOrientation" "LeftOf" Option "SaXDualResolution" "1024x768" Option "SaXDualVSync" "50-60" Option "CRT2VRefresh" "50-60" Option "IgnoreEDID" "yes" Option "MergedFB" "yes" Option "SaXDualHSync" "31-48" Option "MetaModes" "1400x1050,1024x768;1024x768,1024x768" Option "SaXDualHead" "" Option "SaXDualMode" "Clone" Option "SaXDualMonitorModel" "1024X768HZ" VendorName "ATI" Option "XAANoOffscreenPixmaps" "true" Option "DRI" "true" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" InputDevice "Mouse[3]" "SendCoreEvents" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" Option "AIGLX" "on" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" Option "Composite" "on" EndSection