2007/8/10, Andreas Jaeger <[EMAIL PROTECTED]>: > "Andreas Hoffmann" <[EMAIL PROTECTED]> writes: > > > Hi all, > > > > I have a problem with my installation of SuSE 10.3. I installed the > > Alpha5 version > > as the 10.2 version wasn't running on my System with the following > > chipset (due to > > problems with the AHCI drivers) Northbridge AMD 690V; Southbridge AMD SB600; > > I/O Chip: ITE IT8716. My Mainboard is a Gigybyte MA69VM-S2. > > The 10.3 Alpha5 Version was runninng and installing great on this > > system, but the 10.3 Beta1 > > don't run at all anymore. I updated the Alpha5 Installation doing a > > Factory Update with the new DVD from yast2 which worked fine, but > > after the reboot, to activate the newly installed kernel, the system > > cannot boot up again, it hangs with the following error messages: > > ata1: port is slow to respond, please be patient (Status 0xd0) > > ata1: softreset failed (device not ready) > > > > Those messages repeat for 3 times then it tries to fall back to 1.5 > > Gbps but also no success. > > > > Then the other 4 sata Ports are also probed like this and also give > > the same errors too. > > > > After this I tried a clean Install of 10.3 Beta 1 from the KDE CD > > which isn't working as > > the system hangs while loading the AHCI drivers during installation, > > the same as I observed with 10.2. > > > > What can I try to resolve(or to work around) the problem? > > Please do report a bug in bugzilla.novell.com so that the kernel > developers can investigate and fix this. >
I filed the Bug #299575, for similar problems, but in my case is for a fresh install for 10.3 beta 1. Regards --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
