Le mardi 26 juillet 2011 11:10:10, Bruno Friedmann a écrit :
> On 07/26/2011 10:57 AM, Fabien Chaudier wrote:
> > Le mardi 26 juillet 2011 10:48:23, Bruno Friedmann a écrit :
> >> On 07/26/2011 08:14 AM, Fabien Chaudier wrote:
> >>> je charge le module :
> >>> modprobe aacraid
> >>> Dans /var/log/messages j'ai une ligne :
> >>> Jul 26 08:08:08 pc406-66 kernel: [ 721.900828] Adaptec aacraid driver
> >>> 1.1-5[26400]-ms
> >>>
> >>> La commande lspci -vvv
> >>> 01:00.0 RAID bus controller: Adaptec Device 028b (rev 01)
> >>>
> >>> Subsystem: Adaptec Device 0300
> >>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >>> ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz-
> >>> UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >>>
> >>> >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes
> >>>
> >>> Interrupt: pin A routed to IRQ 15
> >>> Region 0: Memory at e1000000 (64-bit, non-prefetchable)
> >>> [size=4M] Region 2: Memory at e1401000 (64-bit,
> >>> non-prefetchable) [size=2K] Region 4: Memory at e1400000
> >>> (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM
> >>> at bf600000 [disabled] [size=256K] Capabilities: [40] Power
> >>> Management version 3
> >>>
> >>> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
> >>> PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+
> >>> PME-Enable- DSel=0 DScale=0 PME-
> >>>
> >>> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>>
> >>> Address: 0000000000000000 Data: 0000
> >>>
> >>> Capabilities: [70] Express (v2) Endpoint, MSI 00
> >>>
> >>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> >>> <1us, L1 <8us
> >>>
> >>> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> >>>
> >>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> >>> Unsupported-
> >>>
> >>> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>> MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>>
> >>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> >>> AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width
> >>> x8, ASPM L0s L1, Latency L0 <512ns, L1 <64us
> >>>
> >>> ClockPM- Surprise- LLActRep- BwNot-
> >>>
> >>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> >>> CommClk+
> >>>
> >>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >>>
> >>> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> >>> DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout:
> >>> Not Supported, TimeoutDis+ DevCtl2: Completion Timeout:
> >>> 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed:
> >>> 5GT/s, EnterCompliance- SpeedDis-, Selectable
> >>> De-emphasis: -6dB
> >>>
> >>> Transmit Margin: Normal Operating Range,
> >>> EnterModifiedCompliance- ComplianceSOS-
> >>> Compliance De-emphasis: -6dB
> >>>
> >>> LnkSta2: Current De-emphasis Level: -3.5dB
> >>>
> >>> Capabilities: [ac] MSI-X: Enable- Count=16 Masked-
> >>>
> >>> Vector table: BAR=0 offset=001c2000
> >>> PBA: BAR=0 offset=001c4000
> >>>
> >>> Capabilities: [100 v1] Advanced Error Reporting
> >>>
> >>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> >>>
> >>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk:
> >>> DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> >>>
> >>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+
> >>> SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> >>> MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr-
> >>> BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> >>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> >>> NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+
> >>> CGenEn- ChkCap+ ChkEn-
> >>>
> >>> La commande modinfo aacraid donne :
> >>> filename:
> >>> /lib/modules/2.6.37.6-0.5-default/kernel/drivers/scsi/aacraid/aacraid.k
> >>> o version: 1.1-5[26400]-ms
> >>> license: GPL
> >>> description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid
> >>> Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver author:
> >>> Red Hat Inc and Adaptec
> >>> srcversion: D19601350A4C79E4B7DF3C4
> >>> alias: pci:v00009005d00000288sv*sd*bc*sc*i*
> >>> alias: pci:v00009005d00000286sv*sd*bc*sc*i*
> >>> alias: pci:v00009005d00000285sv*sd*bc*sc*i*
> >>> alias: pci:v00009005d00000285sv000017AAsd*bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00001028sd*bc*sc*i*
> >>> alias: pci:v00001011d00000046sv0000103Csd000010C2bc*sc*i*
> >>> alias: pci:v00001011d00000046sv00009005sd00001364bc*sc*i*
> >>> alias: pci:v00001011d00000046sv00009005sd00000364bc*sc*i*
> >>> alias: pci:v00001011d00000046sv00009005sd00000365bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00001028sd00000287bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd000002A2bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd0000029Abc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000299bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000298bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00001014sd00009540bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00001014sd00009580bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00001014sd00000312bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00001014sd000002F2bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000297bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000296bc*sc*i*
> >>> alias: pci:v00009005d00000285sv0000103Csd00003227bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000294bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000293bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000292bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00001028sd00000291bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000290bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd0000028Fbc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd0000028Ebc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd00000800bc*sc*i*
> >>> alias: pci:v00009005d00000200sv00009005sd00000200bc*sc*i*
> >>> alias: pci:v00009005d00000287sv00009005sd00000800bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd000002A6bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd000002A5bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd000002A4bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd000002A3bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd000002A1bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd000002A0bc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000029Fbc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000029Ebc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000029Dbc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000029Cbc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000029Bbc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
> >>> alias: pci:v00009005d00000286sv00009005sd0000028Cbc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd0000028Bbc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd0000028Abc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000289bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000288bc*sc*i*
> >>> alias: pci:v00009005d00000285sv000017AAsd00000287bc*sc*i*
> >>> alias: pci:v00009005d00000285sv000017AAsd00000286bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000287bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000285bc*sc*i*
> >>> alias: pci:v00009005d00000285sv00009005sd00000286bc*sc*i*
> >>> alias: pci:v00009005d00000284sv00009005sd00000284bc*sc*i*
> >>> alias: pci:v00009005d00000283sv00009005sd00000283bc*sc*i*
> >>> alias: pci:v00001028d0000000Asv00001028sd00000121bc*sc*i*
> >>> alias: pci:v00001028d0000000Asv00001028sd0000011Bbc*sc*i*
> >>> alias: pci:v00001028d0000000Asv00001028sd00000106bc*sc*i*
> >>> alias: pci:v00001028d00000002sv00001028sd000000D9bc*sc*i*
> >>> alias: pci:v00001028d00000002sv00001028sd000000D1bc*sc*i*
> >>> alias: pci:v00001028d00000004sv00001028sd000000D0bc*sc*i*
> >>> alias: pci:v00001028d00000003sv00001028sd00000003bc*sc*i*
> >>> alias: pci:v00001028d00000002sv00001028sd00000002bc*sc*i*
> >>> alias: pci:v00001028d00000001sv00001028sd00000001bc*sc*i*
> >>> depends:
> >>> vermagic: 2.6.37.6-0.5-default SMP mod_unload modversions
> >>> parm: nondasd:Control scanning of hba for nondasd devices.
> >>> 0=off, 1=on (int)
> >>>
> >>> parm: cache:Disable Queue Flush commands:
> >>> bit 0 - Disable FUA in WRITE SCSI commands
> >>> bit 1 - Disable SYNCHRONIZE_CACHE SCSI command
> >>> bit 2 - Disable only if Battery is protecting Cache (int)
> >>>
> >>> parm: dacmode:Control whether dma addressing is using 64 bit
> >>> DAC. 0=off, 1=on (int) parm: commit:Control whether a
> >>> COMMIT_CONFIG is issued to the adapter for foreign arrays. This is
> >>> typically needed in systems that do not have a BIOS. 0=off, 1=on (int)
> >>> parm: msi:IRQ handling. 0=PIC(default), 1=MSI,
> >>> 2=MSI-X(unsupported, uses MSI) (int) parm:
> >>> startup_timeout:The duration of time in seconds to wait for adapter to
> >>> have it's kernel up and running. This is typically adjusted for large
> >>> systems that do not have a BIOS. (int) parm: aif_timeout:The
> >>> duration of time in seconds to wait for applications to pick up AIFs
> >>> before deregistering them. This is typically adjusted for heavily
> >>> burdened systems. (int) parm: numacb:Request a limit to the
> >>> number of adapter control blocks (FIB) allocated. Valid values are 512
> >>> and down. Default is to use suggestion from Firmware. (int) parm:
> >>> acbsize:Request a specific adapter control block (FIB) size.
> >>> Valid values are 512, 2048,
> >>>
> >>> 4096 and 8192. Default is to use suggestion from Firmware. (int) parm:
> >>> update_interval:Interval in seconds between time sync updates
> >>>
> >>> issued to adapter. (int) parm: check_interval:Interval in
> >>> seconds between adapter health checks. (int) parm:
> >>> check_reset:If adapter fails health check, reset the adapter. a value
> >>> of
> >>>
> >>> -1 forces the reset to adapters programmed to ignore it. (int) parm:
> >>> expose_physicals:Expose physical components of the arrays.
> >>>
> >>> -1=protect 0=off, 1=on (int) parm: reset_devices:Force an
> >>> adapter reset at initialization. (int)
> >>>
> >>> parm: wwn:Select a WWN type for the arrays:
> >>> 0 - Disable
> >>> 1 - Array Meta Data Signature (default)
> >>> 2 - Adapter Serial Number (int)
> >>>
> >>> Voila :-)
> >>>
> >>> Le lundi 25 juillet 2011 21:08:39, Bruno Friedmann a écrit :
> >>>> Elle devrait passer sans souci. Toutefois attention sur les cartes
> >>>> mère type graille taiwan pour desktop.
> >>>>
> >>>> La carte adaptec est exigeante en terme de voltage et d'emplacement
> >>>> pcie
> >>>>
> >>>> J'ai eu le cas d'incompatibilité (le proco de la carte adaptec frisait
> >>>> les 108°) sur une carte mère asus et la même carte sur du gigabyte amd
> >>>> 62° :D
> >>>>
> >>>> Fabien pourrais-tu me donner la ligne lspci -vvv de l'adaptec ?
> >>>> et comparer avec un modinfo aacraid pour voir si la carte est
> >>>> supportée.
> >>>>
> >>>> Par rapport à ton souci, lorsque tu fais un modprobe aacraid, est-ce
> >>>> que dmesg t'indique un succès une erreur ? normalement après
> >>>> l'insertion réussi du module, tu devrais voir apparaitre le disque.
> >>>>
> >>>> Maintenant c'est quoi la capacité de ton raid1, si tu vais plus que
> >>>> 2Tb il faut peut-être faire du GPT mais normalement le contrôleur
> >>>> fait ça tout seul ...
> >>>> (c'est pas encore gagner avec grub legacy après :-)
> >>>>
> >>>> modinfo sur kernel 3.0.0-2
> >>>> modinfo aacraid
> >>>> filename:
> >>>> /lib/modules/3.0.0-2-desktop/kernel/drivers/scsi/aacraid/aacraid.ko
> >>>> version: 1.1-7[28000]-ms
> >>>> license: GPL
> >>>> description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid
> >>>> Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver author:
> >>>> Red Hat Inc and Adaptec
> >>>> srcversion: FB3332EFDBAF0592084355D
> >>>> alias: pci:v00009005d0000028Bsv*sd*bc*sc*i*
> >>>> alias: pci:v00009005d00000288sv*sd*bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv*sd*bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv*sd*bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv000017AAsd*bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00001028sd*bc*sc*i*
> >>>> alias: pci:v00001011d00000046sv0000103Csd000010C2bc*sc*i*
> >>>> alias: pci:v00001011d00000046sv00009005sd00001364bc*sc*i*
> >>>> alias: pci:v00001011d00000046sv00009005sd00000364bc*sc*i*
> >>>> alias: pci:v00001011d00000046sv00009005sd00000365bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00001028sd00000287bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd000002A2bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd0000029Abc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000299bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000298bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00001014sd00009540bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00001014sd00009580bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00001014sd00000312bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00001014sd000002F2bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000297bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000296bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv0000103Csd00003227bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000294bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000293bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000292bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00001028sd00000291bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000290bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd0000028Fbc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd0000028Ebc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd00000800bc*sc*i*
> >>>> alias: pci:v00009005d00000200sv00009005sd00000200bc*sc*i*
> >>>> alias: pci:v00009005d00000287sv00009005sd00000800bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd000002A6bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd000002A5bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd000002A4bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd000002A3bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd000002A1bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd000002A0bc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000029Fbc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000029Ebc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000029Dbc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000029Cbc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000029Bbc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i*
> >>>> alias: pci:v00009005d00000286sv00009005sd0000028Cbc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd0000028Bbc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd0000028Abc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000289bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000288bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv000017AAsd00000287bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv000017AAsd00000286bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000287bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000285bc*sc*i*
> >>>> alias: pci:v00009005d00000285sv00009005sd00000286bc*sc*i*
> >>>> alias: pci:v00009005d00000284sv00009005sd00000284bc*sc*i*
> >>>> alias: pci:v00009005d00000283sv00009005sd00000283bc*sc*i*
> >>>> alias: pci:v00001028d0000000Asv00001028sd00000121bc*sc*i*
> >>>> alias: pci:v00001028d0000000Asv00001028sd0000011Bbc*sc*i*
> >>>> alias: pci:v00001028d0000000Asv00001028sd00000106bc*sc*i*
> >>>> alias: pci:v00001028d00000002sv00001028sd000000D9bc*sc*i*
> >>>> alias: pci:v00001028d00000002sv00001028sd000000D1bc*sc*i*
> >>>> alias: pci:v00001028d00000004sv00001028sd000000D0bc*sc*i*
> >>>> alias: pci:v00001028d00000003sv00001028sd00000003bc*sc*i*
> >>>> alias: pci:v00001028d00000002sv00001028sd00000002bc*sc*i*
> >>>> alias: pci:v00001028d00000001sv00001028sd00000001bc*sc*i*
> >>>> depends:
> >>>> vermagic: 3.0.0-2-desktop SMP preempt mod_unload modversions
> >>>> parm: nondasd:Control scanning of hba for nondasd devices.
> >>>> 0=off,
> >>>>
> >>>> 1=on (int) parm: cache:Disable Queue Flush commands:
> >>>> bit 0 - Disable FUA in WRITE SCSI commands
> >>>> bit 1 - Disable SYNCHRONIZE_CACHE SCSI command
> >>>> bit 2 - Disable only if Battery is protecting Cache (int)
> >>>>
> >>>> parm: dacmode:Control whether dma addressing is using 64 bit
> >>>> DAC. 0=off, 1=on (int) parm: commit:Control whether a
> >>>> COMMIT_CONFIG is issued to the adapter for foreign arrays. This is
> >>>> typically needed in systems that do not have a BIOS. 0=off, 1=on (int)
> >>>> parm: msi:IRQ handling. 0=PIC(default), 1=MSI,
> >>>> 2=MSI-X(unsupported, uses MSI) (int) parm:
> >>>> startup_timeout:The duration of time in seconds to wait for adapter to
> >>>> have it's kernel up and running. This is typically adjusted for large
> >>>> systems that do not have a BIOS. (int) parm:
> >>>> aif_timeout:The duration of time in seconds to wait for applications
> >>>> to pick up AIFs before deregistering them. This is typically adjusted
> >>>> for heavily burdened systems. (int) parm: numacb:Request a
> >>>> limit to the number of adapter control blocks (FIB) allocated. Valid
> >>>> values are 512 and down. Default is to use suggestion from Firmware.
> >>>> (int) parm: acbsize:Request a specific adapter control
> >>>> block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default
> >>>> is to use suggestion from Firmware. (int)
> >>>> parm: update_interval:Interval in seconds between time sync
> >>>> updates issued to adapter. (int) parm:
> >>>> check_interval:Interval in seconds between adapter health checks.
> >>>> (int) parm:
> >>>> check_reset:If adapter fails health check, reset the adapter. a value
> >>>> of -1 forces the reset to adapters programmed to ignore it. (int)
> >>>> parm: expose_physicals:Expose physical components of the
> >>>> arrays. -1=protect 0=off, 1=on (int) parm:
> >>>>
> >>>> reset_devices:Force an adapter reset at initialization. (int) parm:
> >>>> wwn:Select a WWN
> >>>>
> >>>> type for the arrays:
> >>>> 0 - Disable
> >>>> 1 - Array Meta Data Signature (default)
> >>>> 2 - Adapter Serial Number (int)
> >>>>
> >>>> On 07/25/2011 08:30 PM, Fabien CHAUDIER wrote:
> >>>>> D'apres vous, la carte devrait normalement être reconnue malgrès
> >>>>> qu'elle soit récente.
> >>>>>
> >>>>>> J'utilise la 11.4-x86_64. J'ai crée un array (deux disque en RAID1)
> >>>>>> et lorsque je fais l'installation en mode texte, je suis obligé de
> >>>>>> spécifier le module aacraid. La commande lsmod montre le module
> >>>>>> chargé mais pas de disque sda. Pas de message d'erreur sur tty10
> >>>>>> La carte mere est une Gigabyte, modele GA-EX58-EXTREME (rev. 1.0).
> >>>>>>
> >>>>>>> Mouais surtout que normalement aacraid le driver adaptec est super
> >>>>>>> bien tenu dans le kernel pas lancer en automatique ?
> >>>>>>> pb de carte-mère ou d'emplacement sur le bus pcie
> >>>>>>>
> >>>>>>> J'ai plusieurs installation qui tourne avec d'ancien controleur
> >>>>>>> (jusqu'au 58xx) et j'ai jamais vu de soucis avec ce type de matos.
> >>>>>>>
> >>>>>>> On 07/25/2011 08:09 PM, Julien DAL wrote:
> >>>>>>>> Salut,
> >>>>>>>>
> >>>>>>>> Tu ne précises pas la version d'Opensuse que tu utilises.
> >>>>>>>>
> >>>>>>>> Peux-tu nous préciser cela ?
> >>>>>>>>
> >>>>>>>> Merci
> >>>>>>>>
> >>>>>>>> XKomodor
> >>>>>>>>
> >>>>>>>> Le 25/07/2011 19:29, Fabien CHAUDIER a écrit :
> >>>>>>>>> Bonjour,
> >>>>>>>>>
> >>>>>>>>> J'ai voulu installer une carte controleur RAID de chez
> >>>>>>>>> Adpatec,modele 6405,
> >>>>>>>>> http://www.adaptec.com/en-us/support/raid/sas_raid/sas-6405/ et
> >>>>>>>>> pas de chance la carte n'est pas reconnu. J'ai fait une
> >>>>>>>>> installation en mode texte ou il est possible de charger le
> >>>>>>>>> module aacraid pour se genre de carte mais rien n'y fait.
> >>>>>>>>> Sur le site Adaptec il y a bien un lien qui pointe vers deux type
> >>>>>>>>> de "Linux Driver Source Code Downloads"
> >>>>>>>>> Le premier est Driver Source RPM v1.1.7-28000 for Linux.
> >>>>>>>>> Le second est Dynamic Kernel Module Source Code Support
> >>>>>>>>>
> >>>>>>>>> A partir de l'un de ces deux lien est il possible de générer un
> >>>>>>>>> support pour une fresh install ?
> >>>>>>>>> Je m'explique. Lorsqu'on amorce depuis le DVD, lors du choix de
> >>>>>>>>> la langue, de la résolution et du support d'installation, il est
> >>>>>>>>> possible de spécifier à partir de "F6 Driver" un chemin pour
> >>>>>>>>> le/les drivers du matériels non reconnus. Ma question est
> >>>>>>>>> comment réalise cette source d'installation de pilotes
> >>>>>>>>> additionnel ?
> >>>>>>>>>
> >>>>>>>>> Si quelqu'un à déjà résolu se genre de problème, je suis proneur.
> >>>>>>>>>
> >>>>>>>>> Merci d'avance.
> >>
> >> Si tu n'as qu'une seule ligne dans dmesg c'est pas bon du tout ...
> >> Voici par exemple une carte avec 8 disques, assemblés en raid.
> >>
> >> [ 1.280924] Adaptec aacraid driver 1.1-5[24702]-ms
> >> [ 1.282400] aacraid 0000:02:00.0: PCI INT A -> GSI 18 (level, low) ->
> >> IRQ 18 [ 1.283593] aacraid 0000:02:00.0: setting latency timer to 64
> >> [ 1.348539] IRQ 18/aacraid: IRQF_DISABLED is not guaranteed on shared
> >> IRQs [ 1.560343] AAC0: kernel 5.2-0[18252] Nov 22 2010
> >> [ 1.561686] AAC0: monitor 5.2-0[18252]
> >> [ 1.562947] AAC0: bios 5.2-0[18252]
> >> [ 1.564724] AAC0: serial 0A111151485
> >> [ 1.566014] AAC0: Non-DASD support enabled.
> >> [ 1.567327] AAC0: 64bit support enabled.
> >> [ 1.569157] AAC0: 64 Bit DAC enabled
> >> [ 1.577756] scsi0 : aacraid
> >> [ 1.579532] scsi 0:0:0:0: Direct-Access Adaptec ARRAY0-R6
> >> V1.0 PQ: 0 ANSI: 2 [ 1.587291] scsi 0:1:0:0: Direct-Access WDC
> >> WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.589078] scsi 0:1:1:0:
> >> Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [
> >> 1.591109] scsi 0:1:2:0: Direct-Access WDC WD3000HLFS-0 04.0
> >> PQ: 1 ANSI: 5 [ 1.592894] scsi 0:1:3:0: Direct-Access WDC
> >> WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.594582] scsi 0:1:4:0:
> >> Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [
> >> 1.596230] scsi 0:1:5:0: Direct-Access WDC WD3000HLFS-0 04.0
> >> PQ: 1 ANSI: 5 [ 1.597848] scsi 0:1:6:0: Direct-Access WDC
> >> WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.599448] scsi 0:1:7:0:
> >> Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5
> >>
> >> Pour en être certain un
> >> lspci -vvnnk
> >>
> >> donnera les identifiants et le driver associé
> >> Si tu peux pour le controleur adaptec
> >
> > Résultat de la commande lspci -vvnn :
> > 01:00.0 RAID bus controller [0104]: Adaptec Device [9005:028b] (rev 01)
> >
> > Subsystem: Adaptec Device [9005:0300]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz-
> > UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> > >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes
> > Interrupt: pin A routed to IRQ 15
> > Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=4M]
> > Region 2: Memory at e1401000 (64-bit, non-prefetchable) [size=2K]
> > Region 4: Memory at e1400000 (32-bit, non-prefetchable)
> > [size=256] [virtual] Expansion ROM at bf600000 [disabled]
> > [size=256K] Capabilities: [40] Power Management version 3
> >
> > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
> > PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+
> > PME-Enable- DSel=0 DScale=0 PME-
> >
> > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> >
> > Address: 0000000000000000 Data: 0000
> >
> > Capabilities: [70] Express (v2) Endpoint, MSI 00
> >
> > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> > <1us, L1 <8us
> >
> > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> >
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> > Unsupported-
> >
> > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > MaxPayload 128 bytes, MaxReadReq 512 bytes
> >
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> > TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM
> > L0s L1, Latency L0 <512ns, L1 <64us
> >
> > ClockPM- Surprise- LLActRep- BwNot-
> >
> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> > CommClk+
> >
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >
> > LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> > DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout:
> > Not Supported, TimeoutDis+ DevCtl2: Completion Timeout:
> > 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed:
> > 5GT/s, EnterCompliance- SpeedDis-, Selectable
> > De-emphasis: -6dB
> >
> > Transmit Margin: Normal Operating Range,
> > EnterModifiedCompliance- ComplianceSOS-
> > Compliance De-emphasis: -6dB
> >
> > LnkSta2: Current De-emphasis Level: -3.5dB
> >
> > Capabilities: [ac] MSI-X: Enable- Count=16 Masked-
> >
> > Vector table: BAR=0 offset=001c2000
> > PBA: BAR=0 offset=001c4000
> >
> > Capabilities: [100 v1] Advanced Error Reporting
> >
> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk:
> > DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+
> > SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> > MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP-
> > BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr-
> > BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap:
> > First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> >
> > Rien de plus... :-(
> > Les disques font 320Go chacun
>
> Ok ces cartes sont supportés avec le module 1.1.7 présent dans le kernel
> 3.0 où j'ai effectivement cette version du aacraid
> (la même qu'on peut télécharger chez adpatec)
>
> Je regarde plus tard comment l'avoir à l'install de la 11.4
>
> Par hazard, t'aurais pas envie d'installer le système sur une autre paire
> de disque ?
Les tests fait ci dessus sont fait sur une machine avec une machine déjà
installé en 11.4-x86_64.
J'ai juste ajouté le controleur dans le slot PCI Express
--
Fabien CHAUDIER
Département Biosciences
11 av. Jean Capelle
69621 Villeurbanne cedex
Tél. : 04 72 43 89 96
Fax : 04 72 43 85 11
------------------------------------
Are You Environmentalist ?
--
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
