I did lspci & nothing shows up ... but an unspecified Belkin device actually shows up under the hardware list under unknown devices. I tried lspci after modprobing the said drivers but nothing changed.
I then did a hardware report via Yast ... of course Belkin is mentioned a million times .. so here is some Yast-Info : HWClassList=00000040000010 Features=0x2 UniqueID=2UT6.0GdnqWQ3B+2 ParentID=k4bc.qji2yEO2H98 HWClass=unknown Model=Belkin Unclassified device Configured=new Available=no Needed=no Active=unknown Bus=0x86 VendorID=u050d DeviceID=7050 VendorName=Belkin Components RevisionName=2.02 SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0 SysfsBusID=1-3:1.0 Hotplug=4 The above is shown a few times in the report . And something else : 57: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: wkjR.0GdnqWQ3B+2 Parent ID: k4bc.qji2yEO2H98 SysFS ID: /devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0 SysFS BusID: 1-5:1.0 Hardware Class: unknown Model: "Belkin Unclassified device" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x7050 Revision: "2.02" Speed: 1.5 Mbps Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #56 (Hub) So both above are mentioned each maybe at least 4 times every time with very similiar "numbers". Sorry .. full list of "Belkin" mentionses : HWClassList=00000040000010 Features=0x2 UniqueID=2UT6.0GdnqWQ3B+2 ParentID=k4bc.qji2yEO2H98 HWClass=unknown Model=Belkin Unclassified device Configured=new Available=no Needed=no Active=unknown Bus=0x86 VendorID=u050d DeviceID=7050 VendorName=Belkin Components RevisionName=2.02 SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0 SysfsBusID=1-3:1.0 Hotplug=4 HWClassList=00000008010000 Res.Baud=0,0,0,0x00,0x00 UniqueID=4zpN.0GdnqWQ3B+2 ParentID=uIhY.qji2yEO2H98 HWClass=unknown Model=Belkin Unclassified device Configured=no Available=yes Needed=no Active=yes Bus=0x86 VendorID=u050d DeviceID=7050 VendorName=Belkin Components RevisionName=2.02 SysfsID=/devices/pci0000:00/0000:00:02.2/usb3/3-5/3-5:1.0 SysfsBusID=3-5:1.0 Hotplug=4 HWClassList=00000008010000 Res.Baud=0,0,0,0x00,0x00 UniqueID=ADDn.0GdnqWQ3B+2 ParentID=k4bc.qji2yEO2H98 HWClass=unknown Model=Belkin Unclassified device Configured=new Available=no Needed=no Active=unknown Bus=0x86 VendorID=u050d DeviceID=7050 VendorName=Belkin Components RevisionName=2.02 SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1:1.0 SysfsBusID=1-1:1.0 Hotplug=4 HWClassList=00000008000010 Res.Baud=0,0,0,0x00,0x00 UniqueID=KRJj.0GdnqWQ3B+2 ParentID=uIhY.qji2yEO2H98 HWClass=unknown Model=Belkin Unclassified device Configured=no Available=no Needed=no Active=yes Bus=0x86 VendorID=u050d DeviceID=7050 VendorName=Belkin Components RevisionName=2.02 SysfsID=/devices/pci0000:00/0000:00:02.2/usb3/3-1/3-1:1.0 SysfsBusID=3-1:1.0 Hotplug=4 HWClassList=20000008000000 Res.Baud=0,0,0,0x00,0x00 UniqueID=wkjR.0GdnqWQ3B+2 ParentID=k4bc.qji2yEO2H98 HWClass=unknown Model=Belkin Unclassified device Configured=no Available=yes Needed=no Active=unknown Bus=0x86 VendorID=u050d DeviceID=7050 VendorName=Belkin Components RevisionName=2.02 SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0 SysfsBusID=1-5:1.0 Hotplug=4 57: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: wkjR.0GdnqWQ3B+2 Parent ID: k4bc.qji2yEO2H98 SysFS ID: /devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0 SysFS BusID: 1-5:1.0 Hardware Class: unknown Model: "Belkin Unclassified device" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x7050 Revision: "2.02" Speed: 1.5 Mbps Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #56 (Hub) 71: USB 00.0: 0000 Unclassified device [Created at manual.278] Unique ID: 2UT6.0GdnqWQ3B+2 Parent ID: k4bc.qji2yEO2H98 SysFS ID: /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0 SysFS BusID: 1-3:1.0 Hardware Class: unknown Model: "Belkin Unclassified device" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x7050 Revision: "2.02" Speed: 0 bps Config Status: cfg=new, avail=no, need=no, active=unknown Attached to: #56 (Hub) 84: USB 00.0: 0000 Unclassified device [Created at manual.278] Unique ID: 4zpN.0GdnqWQ3B+2 Parent ID: uIhY.qji2yEO2H98 SysFS ID: /devices/pci0000:00/0000:00:02.2/usb3/3-5/3-5:1.0 SysFS BusID: 3-5:1.0 Hardware Class: unknown Model: "Belkin Unclassified device" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x7050 Revision: "2.02" Speed: 0 bps Config Status: cfg=no, avail=no, need=no, active=yes Attached to: #100 (Hub) 86: USB 00.0: 0000 Unclassified device [Created at manual.278] Unique ID: ADDn.0GdnqWQ3B+2 Parent ID: k4bc.qji2yEO2H98 SysFS ID: /devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: unknown Model: "Belkin Unclassified device" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x7050 Revision: "2.02" Speed: 0 bps Config Status: cfg=new, avail=no, need=no, active=unknown Attached to: #56 (Hub) 87: USB 00.0: 0000 Unclassified device [Created at manual.278] Unique ID: KRJj.0GdnqWQ3B+2 Parent ID: uIhY.qji2yEO2H98 SysFS ID: /devices/pci0000:00/0000:00:02.2/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: unknown Model: "Belkin Unclassified device" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x7050 Revision: "2.02" Speed: 0 bps Config Status: cfg=no, avail=no, need=no, active=yes Attached to: #100 (Hub) --- Winston Graeme <[EMAIL PROTECTED]> wrote: > Many thanks 4 reply .. Ill give it a try .. a tiny > poem :-) > ............. > > Hi Winston, > > > > I think Belkin uses Ralink chipsets. Verify that > by > > doing a "lspci". > > If so, load the modules by hand "modprobe rt2400" > or > > rt2500 or rt2570 > > Look at "dmesg" for any messages...if one of the > > modules find the > > device: fine, try a "ifconfig XXX 10.20.30.40 up" > > (substitute XXX by > > the devicename from the dmesg output) > > > > -- mdc > > ___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]