In <[EMAIL PROTECTED]>, on 12/01/05 at 09:36 PM, Birgit Kellner <[EMAIL PROTECTED]> said:
>Argh, after a period of perfect w-lan connectivity with SuSE 9.3, 10.0 >causes agony again. >After the system update, wireless didn't work. I then installed the >ipw-firmware package; after configuring the w-lan interface it worked >fore a few hours until I rebooted. Since then, the wireless connection >has gone. I tried to install the latest ipw2200 and ieee80211 versions, >but neither compiled. >I then reinstalled the original SuSE 10.0 kernel modules (via system >repair), rebuilt ipw-firmware from the src-package (as I picked up in a >SuSE mailing-list), but still, no connectivity. At this stage, I just >don't know what's wrong: kernel modules, firmware, or network setup. And >it all worked so nicely with 9.3! >Any help would be greatly appreciated. >Here's the output from dmesg: ...snip... >ipw2200: module not supported by Novell, setting U taint flag. >ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6 >ipw2200: Copyright(c) 2003-2004 Intel Corporation >ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection >ipw2200: ipw-2.3-boot.fw load failed: Reason -2 >ipw2200: Unable to load firmware: 0xFFFFFFFE >ipw2200: failed to register network device Known issue: https://bugzilla.novell.com/show_bug.cgi?id=113446 HTH. -- ----------------------------------------------------------- "Michael E. Jaggers" <[EMAIL PROTECTED]> ----------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
