>> SuSE 9.0 accepted files /etc/sysconfig/network/ifcfg-eth0:0 to setup
>> a virtual device eth0:0 with a private IP, while eth0 was the public
>> one.
>>
>>
> In opensuse 10.0 it's diferent.
>
> BOOTPROTO='static'
> BROADCAST=''
> IPADDR='192.168.0.32'
> MTU=''
> NAME='Dell 82562EZ 10/100 Ethernet Controller'
> NETMASK='255.255.255.0'
> NETWORK=''
> REMOTE_IPADDR=''
> STARTMODE='auto'
> UNIQUE='rAUF.4JaxctxhRiB'
> USERCONTROL='no'
> IPADDR_luna='192.168.0.31'
> NETMASK_luna='255.255.255.0'
> LABEL_luna='luna'
> _nm_name='bus-pci-0000:02:08.0'
Simple:
IPADDR='192.168.222.1'
IPADDR_2='10.10.10.10'
NETWORK='192.168.222.0'
NETWORK_2='10.0.0.0'
NETMASK='255.255.255.0'
NETMASK_2='255.0.0.0'
etc.
-`J'
--
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
