> On 08/12/06 04:44, Clint Tinsley wrote: > >>> Has anyone succedeed installing Opensuse 10.2 in VMWare > >>> Workstation? Here it hangs immediately after the boot, even with > >>> safe settings. > >> I've seen these symptoms with one 10.2 machine. Try appending > >> "nosmp" to the boot options (start typing at the bootloader with > >> the installation option selected). Of course it's likely to be an > >> unrelated problem, but worth a try. > It worked, but in the middle of disk installation the virtual machine > crashed complaining about a "vide" unsupported operation(DVD was the iso > image in an ide drive, but HD was SCSI). > > > I did tell it that it in creating the VM that it was > > "Other 2.6 Kernel" rather than SuSE. What version of VM Workstation > > are you running? VMware on Windows or Linux? > VMWare Workstation 5.5.3 under SuSE 10.1 > > Could be hardware configuration too. > Minimal, no floppy, no sound, LSI Logic SCSI adapter.
I am going to guess this is an issue with your DVD drive or the DVD itself as I installed from a DVD drive with no problems. Have you attempted a new burn of the DVD with a verify? Could be a combination of the DVD, SuSE 10.1 and the VMware layer but that is going for the roll of the dice. Clint -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]