Hi List,
I decided to install a second instance on my already 10.2 32 bits
machine, using the boot loader from the 32 bits version, I added up a
fourth option (third is Centos on another partition) for the 64 bits
version (as I have a intel 2 dual core chip on this machine), the setup
was using chainloader, pointing to the /dev/sda2 partition where I
loaded the 64B version, with options "do not check system" and "activate
partiton when booting" like I have with my Centos instance. and some
other distros I used to have on my IDE drive.
Problem is that after installation goes back to the 32bits version grub,
I choose to startup the 64 version and immediately after pressing Enter,
goes back to grub and does not starts or send any kind of error
messages, if I get the 10.2-64 I choose to startup OS, it does boots up.
I wonder if it's because this partition is allocated on a sata slave
drive, all of the others were/are sitting on the primary master IDE and
they work fine, this is the first time I use the sata /dev/sda2 to
install a distro.
Any advice would be welcome
Thanks
Jose
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]