I have an Epson RX620 all-in-one, which works fine on my Suse 9.3 x86-64 system thanks to Johannes' help last year. I recently installed Suse 10.2 x86-64 and now it doesn't work :(
PRINTER It seems to have recognized the printer - YaST and CUPS have an entry for it and say "Epson Stylus Photo RX620 - CUPS+Gutenprint v5.0.0 Simplified". But I can't print anything to it. If I try - e.g. using the test facilty in YaST - nothing happens at the printer (no flashing light). CUPS says it is "Printer State: processing, accepting jobs, published." but also says " stylusphotorx620 (Default Printer) "Printer not connected; will retry in 30 seconds...". I've tried stopping and restarting the printer with no effect. Where should I be looking? I didn't see any exceptions when Suse was installing. Do I still need to install some proprietary software? I've searched the archive of this list and the opensuse wiki but didn't manage to find instructions yet. The cups error log that I see when I try to print a test page in yast is at the bottom of this message. SCANNER sane says "no devices available". Again, I haven't found the right documentation. I found the page <http://en.opensuse.org/Epson> but it doesn't seem to say much and is wrong if I believe the description of the iscan package in YaST. Suse 10.2 has installed iscan-firmware but not iscan or iscan-free. I don't understand what it should be installing. Thanks and regards, Dave Howorth I [20/Jun/2007:23:04:14 +0100] Saving job cache file "/var/cache/cups/job.cache"... I [20/Jun/2007:23:04:14 +0100] Listening to 127.0.0.1:631 (IPv4) I [20/Jun/2007:23:04:14 +0100] Listening to ::1:631 (IPv6) I [20/Jun/2007:23:04:14 +0100] Listening to /var/run/cups/cups.sock (Domain) I [20/Jun/2007:23:04:14 +0100] Loaded configuration file "/etc/cups/cupsd.conf" I [20/Jun/2007:23:04:14 +0100] Using default TempDir of /var/spool/cups/tmp... I [20/Jun/2007:23:04:14 +0100] Cleaning out old temporary files in "/var/spool/cups/tmp"... I [20/Jun/2007:23:04:14 +0100] Configured for up to 100 clients. I [20/Jun/2007:23:04:14 +0100] Allowing up to 100 client connections per host. I [20/Jun/2007:23:04:14 +0100] Using policy "default" as the default! I [20/Jun/2007:23:04:14 +0100] Full reload is required. I [20/Jun/2007:23:04:14 +0100] Loaded MIME database from '/etc/cups': 36 types, 40 filters... I [20/Jun/2007:23:04:14 +0100] Loading job cache file "/var/cache/cups/job.cache"... I [20/Jun/2007:23:04:14 +0100] Full reload complete. I [20/Jun/2007:23:04:14 +0100] Listening to 127.0.0.1:631 on fd 0... E [20/Jun/2007:23:04:14 +0100] Unable to open listen socket for address ::1:631 - Address family not supported by protocol. I [20/Jun/2007:23:04:14 +0100] Listening to /var/run/cups/cups.sock on fd 2... I [20/Jun/2007:23:04:14 +0100] Started filter /usr/lib64/cups/filter/pstops (PID 26145) for job 2. I [20/Jun/2007:23:04:14 +0100] Started filter /usr/lib64/cups/filter/pstoraster (PID 26146) for job 2. I [20/Jun/2007:23:04:14 +0100] Started filter /usr/lib64/cups/filter/rastertogutenprint.5.0 (PID 26147) for job 2. I [20/Jun/2007:23:04:14 +0100] Started backend /usr/lib64/cups/backend/usb (PID 26148) for job 2. E [20/Jun/2007:23:04:14 +0100] CUPS-Add-Modify-Printer: Unauthorized I [20/Jun/2007:23:04:14 +0100] Setting y2test device-uri to "usb://EPSON/Stylus%20Photo%20RX620" (was "file:/dev/null".) I [20/Jun/2007:23:04:14 +0100] Setting y2test printer-is-accepting-jobs to 1 (was 0.) I [20/Jun/2007:23:04:14 +0100] Setting y2test printer-is-shared to 1 (was 1.) I [20/Jun/2007:23:04:14 +0100] Setting y2test printer-state to 3 (was 5.) I [20/Jun/2007:23:04:14 +0100] Saving printers.conf... I [20/Jun/2007:23:04:14 +0100] New printer "y2test" added by "root". I [20/Jun/2007:23:04:15 +0100] Adding start banner page "none" to job 6. I [20/Jun/2007:23:04:15 +0100] Adding end banner page "none" to job 6. I [20/Jun/2007:23:04:15 +0100] Job 6 queued on "y2test" by "root". I [20/Jun/2007:23:04:15 +0100] Started filter /usr/lib64/cups/filter/pstops (PID 26161) for job 6. I [20/Jun/2007:23:04:15 +0100] Started filter /usr/lib64/cups/filter/pstoraster (PID 26162) for job 6. I [20/Jun/2007:23:04:15 +0100] Started filter /usr/lib64/cups/filter/rastertogutenprint.5.0 (PID 26163) for job 6. I [20/Jun/2007:23:04:15 +0100] Started backend /usr/lib64/cups/backend/usb (PID 26164) for job 6. W [20/Jun/2007:23:04:15 +0100] [Job 6] This document does not conform to the Adobe Document Structuring Conventions and may not print correctly! -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
