On Wed, 2007-07-11 at 14:15 +0200, Frank Seidel wrote: > On Wednesday 11 July 2007 11:57:14 Mike McMullin wrote: > > On Tue, 2007-07-10 at 12:40 -0700, Kai Ponte wrote: > > > ...and then I ran setpci: > > > > > > jabba:/var/log # setpci -s 6.2 4c=0x22 > > > > What does this line do Kai? I too have a built in card reader on my > > lappy, but it's 6.4, and a different make. > This is a TexasInstruments specific workaround (setting a pci register) > to enable the devices sdhci-mode, so the usual sdhci driver works with it. > (http://list.drzeus.cx/pipermail/sdhci-devel/2005-November/000036.html) > > Again, this is totally TI-specific and will not work in general with > internal cardreader slots. It even could be harmfull to other systems. > > > 06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller > > (rev 10) > Sorry, but this ENE controller is currently still not working fully. ENE > isn't very cooperative in helping here. There are some very early experimental > patches, but currently they don't work for all revisions of this controller. > E.g. see http://list.drzeus.cx/pipermail/sdhci-devel/2007-May/001735.html > > Frank
Thanks for the information Frank. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]