Hi Alex! Alexander Marx schrieb: > And again a problem: I tried to configure a thinclient, but it gets no > IP from the dhcp server, > it says "No boot filename received" and the serverlog tells nothing > about a client which tried to get such image...
That message might be misleading as the thin client will only accept an IP from the DHCP server if it also got the extra boot file info from the OTC server. Unless it is properly configured as a valid thin client in the OTC management, too, it won't get this info... So, did you configure it as a thin client? Or is it still just visible in the "PXE Clients" section of the manager? > even the windows dhcp server seemed not to assign an ip, because the > client did not print anything about an assigned ip on the console. Maybe that shared remote session to guide you wouldn't be such a bad idea after all... :-) -- Bye, Tobias Abt levigo systems gmbh ----------- ein unternehmen der levigo gruppe Max-Eyth-Strasse 30 Telefon: 07031 / 4161-10 D-71088 Holzgerlingen Telefax: 07031 / 4161-11 Geschäftsführer: Oliver Bausch http://systems.levigo.de/ Registergericht: Stuttgart HRB 245 180 USt-ID: DE813226078 ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
