I'm a new OTC admin, looking for a little help with some of our HP
workstations.
OTC works like a champ on one set of our hardware (using Broadcom
onboard NICs), but on our HP xw9400 workstations, booting fails at the
nfs scripts. At first I thought that OTC didn't like the network cards
(dual nVidia NICs onboard), but it looks like both NICs are actually
being recognized and then both are assigned the same IP address. Does
anyone know how to change the nfs scripts to reference one particular
NIC? Or just change the hardware setup to only detect and configure the
first of the NICs?
Thanks in advance for your help -
Colin Campbell
Systems Architect
Convexity Capital Management, LP
cell 617.650.3770 | office 617.585.8587
------------------------------
This e-mail message is intended only for the named recipients above and
contains confidential information. If you are not an intended recipient,
please immediately notify the sender by replying to this e-mail and delete the
message and any attachment(s) from your system. Any unauthorized use or
dissemination of this message in whole or in part is strictly prohibited.
------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
[email protected]
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
