Hi, as far as i see the problem is the gma3000, which is not supported in current OTC version. So the VESA driver is used and this resolution is not supported by this driver.
I have the same problem in grün. I've already asked here an in the developer list, if it is possible to include a newer driver from xorg, but no response/solution 'till now. regards, stefan On Wed, Jul 27, 2011 at 10:27, Andreas von der Reith <andreasvonderre...@nordkehdingen.de> wrote: > Hi! > > > > I still experience problems with the resolution of widescreen monitors (1680 > x 1050). > > > > Technical Data of my Monitor are as follows: > > > > Dimensions and weight (LCD monitor) > > Visible diagonals: 55.87 cm ( 22 ''wide) > > Screen size : 473.76mm x 296.1mm > > Dimensions (W x H x D) incl. monitor base : 511mm x 409.5mm x 202mm > > Dimensions box (W x H x D): 555mm x 437mm x 188mm > > Weight : 5.2kg / 6.5kg > > Dot pitch : 0.282 mm > > Maximal resolution : 1680 x 1050 pixels > > > > Electrical data > > Video: analogue, positive, 0.7 Vpp, 75 Ohm, > > Synchronisation : Separate H/V-sync > > Horizontal frequency: 31.5 kHz ~83 kHz > > Refresh rate: 56 Hz ~ 76 Hz > > Maximum pixel rate: 165 MHz > > Power supply: AC 100~240V, 50~60Hz > > Total power consumption: < 35 W > > < 0.3 W (standby) > > > > Preset operating modes > > The picture position and size have been set set to optimum values at the > factory for the > > operating modes listed above. > > Display resolution = 1680 x 1050 > > Refresh rate = 60Hz > > Horizontal frequency = 65.3kHz > > > > I tried to calculate a modline at > http://xtiming.sourceforge.net/cgi-bin/xtiming.pl with negativ results. > > > > How is a modline supposed to look like that should work with my monitor? > Could somebody post the exact syntax. Are there any settings to be > configured in OTC other than the modline? > > > > Or is my problem related to a not supported graphics card or a driver > problem with OTC operating system. On older hardware i got widescreen > working with the default settings of the hardware device „Monitor: > 1680x1050@75“ . > > > > In my test environment I use the Intel Q33 chipset with onboard graphics GMA > 3100. > > ------------------------------------------------------------------------------ > Got Input? Slashdot Needs You. > Take our quick survey online. Come on, we don't ask for help often. > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > http://p.sf.net/sfu/slashdot-survey > _______________________________________________ > The Open Source Thin Client Solution http://openthinclient.org > openthinclient-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/openthinclient-user > > ------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user