Hi What I don't understand. Why does it work using PXE boot, but give that trouble on localboot?
Jörn do you have different drivers in localboot and pxe boot version? Mit freundlichem Gruß Julian Ohm ------------------------------------------ Ohm & Meyer Immobilien e. K. Inh. Gabor Sarkany Schiffbrücke 66 24939 Flensburg Tel.: 0461 / 840 31 0 Fax.: 0461 / 840 31 11 HRA 2190 FL Haftungsbeschränkungen/Disclaimer Diese Nachricht enthält vertrauliche Informationen und ist ausschließlich für den Adressaten bestimmt. Der Gebrauch durch Dritte ist verboten. Das Unternehmen ist nicht verantwortlich für die ordnungsgemäße, vollständige oder verzögerungsfreie Übertragung dieser Nachricht. Diese Hinweise gelten auch für zukünftige Nachrichten. This message may contain confidential information and is intended solely for the use by the addressee. Use of this communication by others is prohibited. The Company is neither liable for the proper and complete transmission of the message nor for the delay in its receipt. -----Ursprüngliche Nachricht----- Von: Jörn Frenzel [mailto:j.fren...@openthinclient.com] Gesendet: Montag, 13. August 2012 09:23 An: openthinclient-user@lists.sourceforge.net Betreff: Re: [openthinclient-user] How to implement/install additional drivers? Hi Ludwig, yes, it looks like you're missing the driver for the network card. The driver must reside in the initrd. Unpack the initrd and add your driver (you need to build it according to the otc-kernel). See: http://wiki.openvz.org/Modifying_initrd_image Once this is done, you'll be able to boot via PXE, but you'll may notice problems with the nic again once you're using localboot. To fix this, the driver needs to be added to the base too. Please also consider to ask us for the implemetation. Regards, Jörn -- Jörn Frenzel Development and Support mailto:j.fren...@openthinclient.com openthinclient gmbh, Heilbronner Straße 150, 70191 Stuttgart Amtsgericht Stuttgart: HRB 245 177; USt-ID: DE216017092 Geschäftsführer: Alexander Stecher, Martin Kreiner http://openthinclient.com On 13.08.2012 08:35, Klammer Ludwig wrote: > Good Morning, > > after i kept hanging in boot-proccess at the line > > IP-config: eth0 hardware address [MAC ADDRESS] mtu 1500 DHCP RARP > > I was searching for reasons or a way to pass this and read that this > is caused by missing network drivers. > > Is that true? And is it possibe to manually include drivers? > > Thanky you for your replies! > > Best regards, > > Mit freundlichen Grüßen > > Ludwig Klammer > ---------------------------------------------------------------------------- -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user