Hi, We have been running on Openthinclient successfully for several years now, using Wyse thin clients and various PC's. It works great.
Recently we started an upgrade project to use the Consus appliance. Here are show-stopper video problems we run into: a) Using the Consus appliance 'out of the box' with no configuration changes, the Wyse displays video at 1024x768 or lower, but the screen image is always the same size and always runs well off the screen. 800x600 and 1024x768 come out the same size. b) When we use anything higher than 1024x768 the display works while booting, but as soon as it goes into graphic mode the screen goes black with a blinking cursor in the upper left corner. c) I then applied all package updates to Consus. Afterward, the display will show the bootup sequence, but as soon as it goes into graphic display mode the monitor reports 'no signal' on a black screen, and the monitor power light goes from green to amber. I've tried out a number of monitors, as well as a variety of Openthinclient settings. The old system works so well. What am I missing with the new system? Thanks, Mark ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
