On 10:46 Fri 16 Sep , Philipp Matthias Hahn wrote: > > > 2. GPIO > > > > Probably we are lucky and au88x0 implements it in AC97 way, try to write > > mc97 registers via /proc (for this you need build drivers in debug mode, > > '--with-debug=detect' is ok): > > # echo 42 ffff > /proc/asound/card0/codec97#0/mc97#1-1+regs > > # echo 42 0 > /proc/asound/card0/codec97#0/mc97#1-1+regs > > # echo 54 1 > /proc/asound/card0/codec97#0/mc97#1-1+regs > > Sorry, I did echo those values and read mc97#1-1+regs, but no values > changed.
Even 0x42 register? Are you with debug version of drivers ( ./configure --with-debug=detect )? > > , if value is changed (we are lucky then), you may connect line and > > isten 'Hook-Off' clicks (when 0x54 is switched between 0 and 1) with > > parallel phone. > > I don't have the line cable with me at the moment and need to find a > analog telephone circuit until I can test that If values are not changed there will nothing, don't try. BTW, stupid question, if you don't have analog telephone line why you need modem? Sasha. _______________________________________________ Openvortex-dev mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/openvortex-dev
