cd /usr/local/etc/openvpn/ccd
I have two machines, a 'server' & a 'client', both running OpenVPN
2.3_git [git:master/96b9538711789355]. They're connected via VPN over a
UDP connection.
I've got all my routes almost ironed-out; I'm close -- but not wuite
there. I can ping 'everywhere' except Server -> Client's
internal/private IPs.
I'd appreciate a hand. Here's what I've done so far.
The server is a remote, hosted VM. Its IP config is,
IP(eth0) = "S.S.S.S" external/WAN intfc
IP(lo) = 192.168.0.1 local intfc
IP(tun0) = 10.0.0.1 vpn tunnel endpoint
The client is my local router/firewall. Its IP config is,
IP(eth0) = "C.C.C.C" external/WAN intfc
IP(eth1) = 192.168.1.1 internal/LAN intfc
IP(tun0) = 10.0.0.2 vpn tunnel endpoint
Atm, I can ping successfully
@Server, ping -> Server[S.S.S.S] OK
@Server, ping -> Server[192.168.0.1] OK
@Server, ping -> Server[10.0.0.1] OK
@Client, ping -> Client[C.C.C.C] OK
@Client, ping -> Client[192.168.1.1] OK
@Client, ping -> Client[10.0.0.1] OK
@Server, ping -> Client[C.C.C.C] OK
@Client, ping -> Server[S.S.S.S] OK
@Server, ping -> Client[10.0.0.2] OK
@Client, ping -> Server[10.0.0.1] OK
@Client, ping -> Server[192.168.0.1] OK
but am unable to
@Server, ping -> Client[192.168.1.1] FAIL (100% packet
loss)
@Server, ping -> ClientLAN[192.168.1.{2-255}] FAIL (100% packet
loss)
I'm missing a route, or have misconfigured something, but am finding
this last detail confusing, & can't figure out what/where, so far.
My server's config includes:
cat /usr/local/etc/openvpn/server.openvpn.conf
...
mode server
local S.S.S.S
bind
proto udp4
dev tun0
topology subnet
server 10.0.0.0 255.255.255.0
client-config-dir ccd/
client-to-client
push "route 192.168.0.0 255.255.255.0"
push "route 192.168.1.0 255.255.255.0"
route 192.168.1.0 255.255.255.0
...
the server's client-specific config includes:
cat /usr/local/etc/openvpn/ccd/client1.openvpn.conf
...
ifconfig-push 10.0.0.2 S.S.S.S
iroute 192.168.1.0 255.255.255.0
...
and, the client's config includes:
cat /usr/local/etc/openvpn/client.openvpn.conf
...
local C.C.C.C
bind
proto udp4
daemon
dev tun0
<connection>
remote S.S.S.S 1194 udp
</connection>
pull
...
Again, I'm 'mostly' connected and communicating. What've I
missed/screwed up?
Thanks!
PG
------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users
