Hi,

On 29-09-14 15:50, Stephan Alz wrote:
> I had my ovpn servers in verb 3 mode. I didn't upgrade them just turned on 
> the tls-auth feature and surprisingly it stopped logging a lot of events.
> Instead of an output like this:
> 
> Tue Jan 27 09:53:41 2009 119.137.85.240:2114 VERIFY OK: depth=1, 
> /C=DK/ST=CPH/L=COPENHAGEN/O=CTcash_Limited/OU=IT/CN=server/[email protected]
> Tue Jan 27 09:53:41 2009 119.137.85.240:2114 VERIFY OK: depth=0, 
> /C=DK/ST=CPH/O=CTcash_Limited/OU=IT/CN=client-1/[email protected]
> Tue Jan 27 09:53:42 2009 119.137.85.240:2114 Data Channel Encrypt: Cipher 
> ‘BF-CBC’ initialized with 128 bit key
> Tue Jan 27 09:53:42 2009 119.137.85.240:2114 Data Channel Encrypt: Using 160 
> bit message hash ‘SHA1′ for HMAC authentication
> Tue Jan 27 09:53:42 2009 119.137.85.240:2114 Data Channel Decrypt: Cipher 
> ‘BF-CBC’ initialized with 128 bit key
> Tue Jan 27 09:53:42 2009 119.137.85.240:2114 Data Channel Decrypt: Using 160 
> bit message hash ‘SHA1′ for HMAC authentication
> Tue Jan 27 09:53:42 2009 119.137.85.240:2114 Control Channel: TLSv1, cipher 
> TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
> Tue Jan 27 09:53:42 2009 119.137.85.240:2114 [client-1] Peer Connection 
> Initiated with 119.137.85.240:2114
> Tue Jan 27 09:53:42 2009 client-1/119.137.85.240:2114 OPTIONS IMPORT: reading 
> client specific options from: ccd/client-1
> Tue Jan 27 09:53:42 2009 client-1/119.137.85.240:2114 MULTI: Learn: 10.8.0.6 
> -> client-1/119.137.85.240:2114
> Tue Jan 27 09:53:42 2009 client-1/119.137.85.240:2114 MULTI: primary virtual 
> IP for client-1/119.137.85.240:2114: 10.8.0.6
> Tue Jan 27 09:53:42 2009 client-1/119.137.85.240:2114 MULTI: internal route 
> 10.10.1.0/24 -> client-1/119.137.85.240:2114
> Tue Jan 27 09:53:42 2009 client-1/119.137.85.240:2114 MULTI: Learn: 
> 10.10.1.0/24 -> client-1/119.137.85.240:2114
> Tue Jan 27 09:53:43 2009 client-1/119.137.85.240:2114 PUSH: Received control 
> message: ‘PUSH_REQUEST’
> Tue Jan 27 09:53:43 2009 client-1/119.137.85.240:2114 SENT CONTROL 
> [client-1]: ‘PUSH_REPLY,route 192.168.1.0/24 255.255.255.0,dhcp-option DNS 
> 10.8.0.1,redirect-gateway def1,route 10.8.0.1,ping 10,ping-restart 
> 120,ifconfig 10.8.0.6 10.8.0.5′ (status=1)
> 
> I only get 1 line in the logs:
> OPTIONS IMPORT: reading client specific options from: ...
> 
> I did try verb mode 4 as well, it's the same. I don't want to go over that to 
> get raw packet info to the logfiles. Why is this happening? Tls-auth setting 
> should not affect the logging. I get the same result if I log into a separate 
> logfile or to syslog.

I tried, but am not able to reproduce this. I tested with both 2.3 and
git-master. Both keep logging all the output just fine with tls-auth
enabled. Are you sure you did not change anything else? Permissions on
log files perhaps? Or just different log file? (Just some wild guesses)

-Steffan

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users

Reply via email to