Hi, I use a server/client environment to have OpenVPN connect my 5 sites. Simply set it up as if you would for 1 client. Then make sure you set up routing correctly. Most of that is done using the iroute statement, best is to use 1 config file per client in a ccd directory. Remember, routing consists of 2 parts with openvpn. The OS needs to know to send packets to the Openvpn interface, OpenVPN needs to know which client has which network behind it. Using iroute wil let OpenVPN set it up fout you for the most part. Use a push-route in your server config to let the clients know what the network behind the server is.
What platform will you use for this? Redhat, Debian, etc? Or a non Linux platform? Met vriendelijke groet, Bonno Bloksma senior systeembeheerder tio university of applied sciences begijnenhof 8-12 / 5611 el eindhoven t +31 (0)40-296 28 28 [email protected] / www.tio.nl Volg ons op Twitter / Facebook / LinkedIn / YouTube -----Oorspronkelijk bericht----- Van: Zesen Qian [mailto:[email protected]] Verzonden: vrijdag 29 mei 2015 16:59 Aan: [email protected] Onderwerp: [Openvpn-users] Site-to-Site configuration? Hello, I 've just switched from IPsec(strongswan) to OpenVPN, and I want to configure a site-to-site setup. I googled for it but find nothing. There 're only tutorials for some GUI based configuration, but I need the 'openvpn.conf' example. Thanks! -- Regards, 祝好 Zesen Qian (钱泽森) ------------------------------------------------------------------------------ _______________________________________________ Openvpn-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openvpn-users ------------------------------------------------------------------------------ _______________________________________________ Openvpn-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openvpn-users
