Hi Gert,

Thank you for your reply. I really appreciate your patience.

There was no entry in sysctl.conf for
/proc/sys/net/ipv6/conf/eth0/accept_ra=2 so I added it at the bottom. I
presume that's okay.

I'm really at a loss. I haven't touched the routing on either the client or
the server (at least not directly). (I wouldn't even know where to begin.) I
concur with you that "it's always routing" (or maybe routing or the
firewall). In my limited experience using a windows 10 client and both
windows 10 server and linux server, it's not difficult to get the client and
server talking to each other, but to get the server to pass the traffic
seems like a brick wall especially for ipv6.

When I originally installed openvpn on the client and the server, it was
possible to ping in both directions using ipv4 and ipv6. As I said, I didn't
touch the routing before or after, so I have no idea why it stopped working.
When I had ufw enabled, I was able to get the server to pass ipv4 traffic,
but I can't even get that working now.

At the moment with the firewall on the server disabled, I can ping external
websites using ipv4 and ipv6. Similarly on the client when openvpn is not
connected. When I connect the client to the server, I can ping the server
from the client using both ipv4 and ipv6. I can only ping the client from
the server using ipv4. 

Maybe we need to go back to first principles.

What info should I post? Should I send the client and server config files?

Thanks again.

-----Original Message-----
From: Gert Doering [mailto:[email protected]] 
Sent: Sunday, June 11, 2017 11:10 PM
To: Daryl Morse <[email protected]>
Cc: 'openvpn users list' <[email protected]>
Subject: Re: [Openvpn-users] Need help with Ubuntu 16.04 LTS OpenVPN 2.4
Dual-Stack Server Firewall Configuration

Hi,

On Sun, Jun 11, 2017 at 05:04:26PM -0700, Daryl Morse wrote:
> With /proc/sys/net/ipv6/conf/eth0/accept_ra=2, it???s possible to ping
external addresses from the server.
> 
> How do I make that setting persist. I used systemctl and it clears upon
rebooting.

/etc/sysctl.conf

> After restarting and reapplying the setting, it???s possible to ping the
client and server both ways using ipv4 but not ipv6. It???s possible to ping
the client and server from other hosts on their respective network with
ipv6, so the problem is related to openvpn.

Have you been following the check list in my "it's always routing" mail?

If yes, what's the outcome?

gert
-- 
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
[email protected]
fax: +49-89-35655025
[email protected]


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users

Reply via email to