Need to generate some configuration but I'm finding some issues. I need tot bridge both eth0 and eth1 in a lan. As well as disable the existing wan (eth1). Openwisp/netjsonconfig does not accept the following line:
"name": "eth0 eth1", like in: { "interfaces": [ { "type": "bridge", "disabled": false, "autostart": true, "network": "lan", "name": "eth1 eth0", "mtu": 1500, "auto": "1", "addresses": [ { "proto": "dhcp", "family": "ipv4" } ] } ] } which returns; .interfaces[0].type should be equal to one of: "ethernet", "virtual", "loopback", "other" .interfaces[0].name should match pattern "^[^\s]*$" So I tried the general netjsonconfig with config_name/config for the bridge. I tried: { "interface": [ { "config_name": "interface", "config_value": "lan", "type": "bridge", "proto": "dhcp", "name": "eth0 eth1", "auto": "1", "mtu": "1500", "enabled": "1" }, { "config_name": "interface", "config_value": "wan", "proto": "dhcp", "enabled": "0" } ] } This works fine but generates a file called interface instead the file network, I also tried network and other options without success. Any help? I'm sorry that apparently in the forum I'm the only one that finds hard to generate ucis form netjsonconfig in some situations. -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to openwisp+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.