I am also trying to do the same thing.
I enabled the freeradius module with the following content of playbook file:
- hosts: openwisp2 become: "{{ become | default('yes') }}" roles: -
openwisp.openwisp2 vars: openwisp2_radius: true openwisp2_freeradius_install
: true # set to false when you don't want to register openwisp-radius # API
endpoints. openwisp2_radius_urls: true
Then I configured freeradius to use eap-tls by setting default_eap_type=tls
and provided the path to server and ca certificates and their respective
passwords.
And I also configured both access point as well as station to use wpa3
eap-tls but when station try to verify itself I am getting following error
while running freeradius -X:
ERROR: username and password field cannot be left empty. (this is coming
from openwisp)
and if I am running only freeradius (without openwisp) then this error is
not coming and i am able to authenticate station.
so here problem is wpa3 has to ask for the certificates rather than
username and password, then why this error is coming and what is the
solution for that.
On Tuesday, December 24, 2024 at 4:51:21 PM UTC+5:30 Sailaja Ungati wrote:
> Hi all,
> I am trying to integrate freeradius with openwisp so that i can use WPA
> Enterprise (EAP TLS). I went through the openwisp documentation and found
> steps to configure freeradius for WPA(EAP-TTLS-PAP) :
> https://openwisp.io/docs/dev/radius/deploy/freeradius_wpa_enterprise.html
>
> But I couldn't found the same for TLS.
>
> Can anyone tell me steps to do so?
>
> Thanks & Regards
> Sailaja
>
--
You received this message because you are subscribed to the Google Groups
"OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion, visit
https://groups.google.com/d/msgid/openwisp/e75d1643-753b-4c35-ace4-6a51b08b3325n%40googlegroups.com.
