The output of the curl commands show that the application is not reachable at the URLs you're trying from your device.
There's not much openwisp can do about it here. I would check the DNS resolution and ensure the IP targeted responds correctly on port 443. Federico Il mar 21 gen 2025, 15:49 Michele Salerno <[email protected]> ha scritto: > Hi, I have openwisp server in my lan with NAT on public ip for access > from outside. > An external router registers, if I put an internal router in my lan it > doesn't work > > root@OpenWrt:~ # curl https://10.27.22.5 --insecure > curl: (7) Failed to connect to 10.27.22.5 port 443 after 0 ms: Error > > root@OpenWrt:~ # curl https://openwisp.nnxx.ninux.org --insecure > curl: (7) Failed to connect to openwisp.nnxx.ninux.org port 443 after 0 > ms: Error > > I try with lan ip and with domain and I also turned off SSL verification > > config controller 'http' > option url 'https://10.27.22.5' > option interval '120' > option management_interval '10' > #option registration_interval '30' > option verify_ssl '0' > option shared_secret 'Secretn1nuxB4s' > #option consistent_key '1' > #option mac_interface 'eth0' > option management_interface 'owzt0192af' > #option merge_config '1' > #option tags '' > #option test_config '1' > #option test_script '/usr/sbin/mytest' > #option hardware_id_script '/usr/sbin/read_hw_id' > #option hardware_id_key '1' > #option bootup_delay '0' > #option uuid '' > #option key '' > # curl options > #option connect_timeout '15' > #option max_time '30' > #option capath '/etc/ssl/certs' > #option cacert '/etc/ssl/certs/ca-certificates.crt' > #option checksum_max_retries '5' > #option checksum_retry_delay '6' > # hooks > #option pre_reload_hook '/usr/sbin/my_pre_reload_hook' > #option post_reload_hook '/usr/sbin/my_post_reload_hook' > > How can I solve it? > > Best regards, > > Michele Salerno > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion, visit > https://groups.google.com/d/msgid/openwisp/50c578d3-5a63-4bbd-bf6f-fa3ba271466b%40gmail.com > . > -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion, visit https://groups.google.com/d/msgid/openwisp/CAAGgX6JdxriELV%2BQwZ9hLbt%2B1Yaku698DFFSqt7a-WALuhp%2BbQ%40mail.gmail.com.
