I'm testing a small install of OpenWisp, deployed via Docker, for a series of 3 dumb AP's (Zyxel NWA50AX Pro) with OpenWRT on them. These are just PoE AP's, offering no DHCP, DNS, etc, and this POC will be used as a pitch for further OpenWISP deployment.
OpenWisp is installed as a docker container in its own VM, and that is on my server VLAN. The AP's are on our network device VLAN, and they can all ping each other just fine, as well as bidirectional ping to and from the OpenWisp VM. OpenWisp is up, and I've installed the OpenWisp packages on the AP's. I did auto-provisioning, and they all show up under devices. I deployed a demo config, and that shows as "applied". The one hiccup is that each device is showing as critical, and that's because they're failing their ping check. I noticed each device wasn't getting the "Management IP" populated, so I set the "OPENWISP_CONTROLLER_MANAGEMENT_IP_ONLY" setting to "False" in .env, but I'm not getting any feedback that the setting took, so I set the IP manually to match the "Last IP" value. I figured I should perform a ping test from the actual docker container, and not the VM, but there are 13 containers and I'm not sure which one the ping check would be coming from. Any guidance would be appreciated! -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion, visit https://groups.google.com/d/msgid/openwisp/a47c4b42-84f7-4397-99d0-25964bacbef0n%40googlegroups.com.
