add three missing LEDs - PoE-Max - Link/Act - PoE add two missing buttons - mode - reset
The last was dropped in commit 61a3d0075b15 ("realtek: update GPIO bindings in the dts files in dts-5.10") Signed-off-by: Jan-Niklas Burfeind <g...@aiyionpri.me> --- Hello everyone, I just tested the missing GPIO assignments for the DGS-12-10-10P and verified the three LEDs as well as the reset button are working. The mode button should work, as its adress is 481 compared to resets 484, but I haven't found a way to test it yet. Thanks Jan-Niklas Burfeind .../dts-5.10/rtl8382_d-link_dgs-1210-10p.dts | 30 ++++++++++++++++--- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts index 7ab37aaa9f..16934ede3b 100644 --- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts @@ -11,12 +11,34 @@ compatible = "gpio-keys-polled"; poll-interval = <20>; - /* is this pin 30 on the external RTL8231 (&gpio1)? */ - /*mode { + mode { + label = "mode"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LIGHTS_TOGGLE>; + }; + + reset { label = "reset"; - gpios = <&gpio0 94 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; - };*/ + }; + }; + + leds { + link_act { + label = "green:link_act"; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + + poe { + label = "green:poe"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + + poe_max { + label = "yellow:poe_max"; + gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; }; gpio1: rtl8231-gpio { -- 2.38.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel