Some Gemini devices are NAS type devices and need to ask for
DHCP IP on eth0. Some has a LAN/WAN setup. Add sensible
defaults for all known devices.
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
.../gemini/base-files/etc/board.d/02_network | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/target/linux/gemini/base-files/etc/board.d/02_network
b/target/linux/gemini/base-files/etc/board.d/02_network
index d6ee5cadfe25..93a02a7564ef 100644
--- a/target/linux/gemini/base-files/etc/board.d/02_network
+++ b/target/linux/gemini/base-files/etc/board.d/02_network
@@ -9,16 +9,31 @@ dlink,dir-685)
ucidef_set_interface "eth" device "eth0" protocol "none"
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
;;
+dlink,dns-313|\
+edimax,ns-2502|\
+raidsonic,ib-4220-b|\
+wiliboard,wbd111|\
+wiliboard,wbd222)
+ # NAS machines with a single ethernet port
+ ucidef_set_interface_lan "eth0" "dhcp"
+ ;;
itian,sq201)
# These are all connected to eth1 thru VSC7395
ucidef_set_interface "eth" device "eth1" protocol "none"
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
;;
+ssi,1328)
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ;;
storlink,gemini324)
# These are all connected to eth1 thru VSC7385
ucidef_set_interface "eth" device "eth1" protocol "none"
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
;;
+teltonika,rut1xx)
+ # One ethernet LAN which is offering DHCP
+ ucidef_set_interface_lan "eth0"
+ ;;
esac
board_config_flush
--
2.34.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
