The DAP-X1860 is a wall-plug AX1800 repeater.
Specifications:
- MT7621, 256 MiB RAM, 128 MiB SPI NAND
- MT7915 + MT7975 2x2 802.11ax (DBDC)
- Ethernet: 1 port 10/100/1000
- LED RSSI bargraph (2x green, 1x red/green),
incorrectly populated red/orange status LEDs
(should be red/green according to documentation)
Installation:
- Keep reset button pressed during plug-in
- Web Recovery Updater is at 192.168.0.50
- Upload factory.bin, confirm flashing
(seems to work best with Chromium-based browsers)
Revert to OEM firmware:
- tar -xvf DAP-X1860_RevA_Firmware_101b94.bin
- openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \
-out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ==
- tar -xvf FWImage.st1
- flash kernel_DAP-X1860.bin via Recovery
Signed-off-by: Sebastian Schaper <open...@sebastianschaper.net>
---
I am not quite happy with the 4096K fixed-size kernel partition,
but this is consistent with many other devices using UBI.
If one day the kernel image will grow larger, this could be addressed
simultaneously (e.g. using lzma-loader) for all devices.
Do we even need UBI when there is NMBM? But probably better for redundancy.
I see there are further options available for `mediatek,nmbm` in dts, i.e.
`bmt-max-ratio` and `bmt-remap-range`, only used by those two NMBM devices.
Do we need to set these as well, and how should the values be determined?
RSSI bargraph is configured for the 5GHz interface `wlan1` to be consistent
with other devices using the `rssileds` package, however in current master
this is no longer working, since individual interfaces (e.g. `phy1-sta0`)
will be created when connecting to a network. It seems this needs to be
resolved within `rssileds`, rather than individually for this device.
`uImage-relocate` is based on openwrt/staging/nbd from
977e37c0f23e ramips: add work-in-progress support for D-Link DIR-X1860
.../ramips/dts/mt7621_dlink_dap-x1860-a1.dts | 197 ++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 37 ++++
.../mt7621/base-files/etc/board.d/01_leds | 7 +
.../mt7621/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 7 +
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
6 files changed, 250 insertions(+)
create mode 100644 target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
new file mode 100644
index 0000000000..8c156c17ce
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dap-x1860-a1", "mediatek,mt7621-soc";
+ model = "D-Link DAP-X1860 A1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_orange;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ rssihigh {
+ label = "green:rssihigh";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimedium {
+ label = "green:rssimedium";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow_orange {
+ label = "orange:rssilow";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+
+ rssilow_green {
+ label = "green:rssilow";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ mediatek,nmbm;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "config";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ factory: partition@100000 {
+ label = "factory";
+ reg = <0x100000 0x80000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_4: macaddr@4 {
+ reg = <0x4 0x6>;
+ };
+ };
+
+ partition@180000 {
+ label = "kernel";
+ reg = <0x180000 0x0400000>;
+ };
+
+ fwconcat0: partition@580000 {
+ label = "fwconcat0";
+ reg = <0x580000 0x3000000>;
+ };
+
+ partition@3580000 {
+ label = "manufacture";
+ reg = <0x3580000 0x400000>;
+ read-only;
+ };
+
+ partition@3980000 {
+ label = "storage";
+ reg = <0x3980000 0x680000>;
+ read-only;
+ };
+
+ fwconcat1: partition@4000000 {
+ label = "fwconcat1";
+ reg = <0x4000000 0x3800000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ mediatek,disable-radar-background;
+ };
+};
+
+ðernet {
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_4>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 08aa592be8..beae1f929a 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -14,6 +14,23 @@ ifdef CONFIG_LINUX_5_10
DTS_CPPFLAGS += -DDTS_LEGACY
endif
+RELOCATE_LOADADDR = 0x81000000
+
+define Build/uImage-relocate
+ mkimage \
+ -A $(LINUX_KARCH) \
+ -O linux \
+ -T kernel \
+ -C $(word 1,$(1)) \
+ -a $(RELOCATE_LOADADDR) \
+ -e $(RELOCATE_LOADADDR) \
+ -n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call
toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
+ $(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
+ $(wordlist 2,$(words $(1)),$(1)) \
+ -d $@ $@.new
+ mv $@.new $@
+endef
+
define Build/arcadyan-trx
echo -ne "hsqs" > $@.hsqs
$(eval trx_magic=$(word 1,$(1)))
@@ -470,6 +487,26 @@ define Device/cudy_x6
endef
TARGET_DEVICES += cudy_x6
+define Device/dlink_dap-x1860-a1
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 53248k
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-X1860
+ DEVICE_VARIANT := A1
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | \
+ uImage-relocate lzma
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+ check-size | elx-header 011b0060 8844A2D168B45A2D
+ DEVICE_PACKAGES := kmod-mt7915e rssileds
+endef
+TARGET_DEVICES += dlink_dap-x1860-a1
+
define Device/dlink_dir-8xx-a1
$(Device/dsa-migration)
IMAGE_SIZE := 16000k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 42e50451e3..626f048a85 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -50,6 +50,13 @@ jcg,y2|\
xzwifi,creativebox-v1)
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
;;
+dlink,dap-x1860-a1)
+ ucidef_set_rssimon "wlan1" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1"
"25"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow"
"wlan1" "26" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH"
"green:rssimedium" "wlan1" "51" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76"
"100"
+ ;;
dlink,dir-1960-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index b7121db64f..40afa5879a 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -11,6 +11,7 @@ ramips_setup_interfaces()
ampedwireless,ally-00x19k|\
asus,rp-ac56|\
asus,rp-ac87|\
+ dlink,dap-x1860-a1|\
edimax,re23s|\
mikrotik,ltap-2hnd|\
mikrotik,routerboard-m11g|\
diff --git
a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 69ecaefd27..161bd942db 100644
---
a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++
b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -22,6 +22,13 @@ case "$board" in
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
;;
+ dlink,dap-x1860-a1)
+ hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+ [ "$PHYNBR" = "0" ] && \
+ macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && \
+ macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
+ ;;
dlink,dir-853-a3)
[ "$PHYNBR" = "0" ] && \
macaddr_setbit_la "$(mtd_get_mac_binary factory
0xe000)" \
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 06a35077dc..15bab1958a 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -59,6 +59,7 @@ platform_do_upgrade() {
beeline,smartbox-giga|\
beeline,smartbox-turbo|\
belkin,rt1800|\
+ dlink,dap-x1860-a1|\
dlink,dir-1960-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1|\
--
2.34.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
